重结晶：固溶体平衡

Recrystallization exploits solubility differences between a desired compound and impurities. The impure solid dissolves in hot solvent to form a saturated solution, then cools to decrease solubility. As temperature drops, the desired compound crystallizes while impurities remain dissolved, allowing separation by filtration.

The solvent must dissolve the desired compound at high temperatures but not at low temperatures, enabling crystallization upon cooling. Simultaneously, impurities should remain soluble at all chosen temperatures. This selective solubility difference is essential for effective purification and relates to principles of crystal growth principles crystallization.

Nucleation occurs when the cooled solution becomes supersaturated, causing random aggregation of concentrated solute molecules to form the first crystal, called a seed or nucleus. This initial crystal formation marks the beginning of the crystallization phase, where additional molecules attach to grow larger crystals.

Rapid cooling generates many nucleation sites, producing numerous small crystals with lower purity. Slow cooling creates fewer nucleation sites, yielding fewer but larger crystals of higher purity. Controlling cooling rate is therefore crucial for obtaining desired crystal characteristics and purification efficiency.

A saturated solution contains the maximum dissolved solute at that temperature, ensuring efficient use of solvent. Using just enough hot solvent to dissolve the compound creates a saturated solution, which maximizes the amount of desired compound that crystallizes upon cooling while minimizing solvent waste.

Solid-solution equilibrium describes how a substance distributes between solid and solution phases at equilibrium, with distribution depending on temperature. This equilibrium is temperature-dependent, typically favoring the solid phase at lower temperatures, which is the fundamental principle enabling recrystallization-based purification and separation.

After dissolving the impure compound in hot solvent to form a saturated solution, undissolved impurities are removed by filtration while the solution remains hot. This step ensures that only dissolved components proceed to the cooling and crystallization stages, improving final product purity.