Question 1

What causes standing waves to form on a plucked string?

Accepted Answer

Standing waves form when two waves traveling in opposite directions with the same frequency and amplitude interfere with each other. This interference and superposition of waves creates a pattern of nodes and antinodes along the string. The resulting non-linear wave patterns are called normal modes or harmonics, which remain stationary rather than traveling along the string.

Question 2

What are nodes and antinodes in a standing wave?

Accepted Answer

Nodes are points on the string that remain stationary and never move, while antinodes are points that oscillate with maximum amplitude. In a standing wave on a string, nodes always occur at the fixed ends due to boundary conditions. The alternating pattern of nodes and antinodes characterizes each normal mode or harmonic of the string.

Question 3

How does the fundamental mode differ from higher harmonics?

Accepted Answer

The fundamental mode, or first harmonic, occurs when the wavelength equals twice the string length, creating one antinode between two end nodes. Higher harmonics have shorter wavelengths that fit multiple half-wavelengths along the string length. Each successive harmonic has a frequency that is an integral multiple of the fundamental frequency.

Question 4

What boundary condition must be satisfied for standing waves on a string?

Accepted Answer

The boundary condition requires nodes at both fixed ends of the string. This constraint means the string length must equal an integral multiple of half-wavelengths. Any wave pattern that violates this condition cannot exist on the string, which determines which frequencies can produce standing waves.

Question 5

How are harmonic frequencies related to the fundamental frequency?

Accepted Answer

Each harmonic frequency is an integral multiple of the first harmonic frequency. The second harmonic has twice the frequency of the fundamental, the third harmonic has three times the frequency, and so on. This mathematical relationship arises from the boundary conditions that dictate how wavelengths fit along the string length.

Question 6

Why do certain building heights suffer more damage during earthquakes?

Accepted Answer

Buildings experience resonance when earthquake waves match the building's natural frequency of vibration, causing standing waves to form in the structure. Buildings of specific heights match the boundary conditions for standing waves at those frequencies, leading to constructive interference and amplified oscillations. This resonance effect can devastate buildings of certain heights while leaving neighboring structures intact.

Question 7

What determines the possible frequencies of standing waves on a string?

Accepted Answer

The distance between fixed ends and the propagation speed of the disturbance determine possible standing wave frequencies. The symmetrical boundary conditions—nodes at each end—restrict which wavelengths can fit on the string. Only frequencies that allow integral multiples of half-wavelengths to fit between the fixed ends can excite standing waves.

驻波模态 - I