频率响应

Gain quantifies the extent of signal amplification or attenuation in communication systems. Power gain is expressed as the common logarithm of the ratio of output power to input power, measured in bels or decibels. When output power equals input power, gain is zero decibels. When output power doubles input power, gain is three decibels; when halved, gain is minus three decibels.

Gain in decibels is calculated using the formula dB = 20 log₁₀(K), where K is the amplitude ratio. A logarithmic scale provides a convenient way to represent very large and very small numbers on the same scale. When gain K exceeds unity, amplification occurs; when less than one, attenuation occurs. This representation simplifies analysis of circuits with extreme power variations.

Gain and phase shift are frequency-dependent properties in linear circuits containing reactive elements. The circuit's behavior depends on the input sinusoid frequency, making both gain and phase shift frequency functions. This frequency dependence is critical for understanding the transfer function and bode plots that characterize circuit performance across different frequencies.

Power gain can be expressed in terms of voltage and resistance ratios by applying logarithm rules. When input resistance equals load resistance, gain becomes proportional to the output and input voltage ratio. Similarly, gain can be represented using current and resistance ratios. This flexibility allows engineers to calculate gain using available circuit parameters.

Phase shift is the angular difference between output and input sinusoids, representing how much the output signal is delayed or advanced relative to the input. A positive phase shift indicates the output lags the input signal, while negative phase shift means the output leads. This relationship is essential for analyzing circuit behavior in frequency response of a circuit applications.

A circuit's amplification or attenuation is determined by comparing output and input signal amplitudes. When gain K is greater than unity, the circuit amplifies the signal; when K is less than one, the circuit attenuates it. Gain equal to unity means no amplification or attenuation occurs. This amplitude comparison directly reveals the circuit's effect on signal strength.

Gain analysis is critical for understanding how series resonant circuits respond to different frequencies. At resonance, gain reaches maximum values, while off-resonance frequencies produce reduced gain. Understanding gain behavior across frequencies helps predict circuit performance and design filters or amplifiers. Gain measurements directly inform the characteristics of series resonant circuit behavior.