Question 1

How is the maximum size of aggregate determined?

Accepted Answer

Maximum aggregate size is determined by the sieve size that retains at least 15 percent of particles in a sample. This measurement defines the aperture through which smaller particles pass while larger ones are retained. The sieve analysis and grading curves method provides a standardized way to classify aggregates by size for concrete mix design.

Question 2

Why does larger aggregate size improve concrete workability?

Accepted Answer

As maximum aggregate size increases, the surface area per unit mass requiring cement paste coverage decreases significantly. This reduction lowers water requirements and allows the water-to-cement ratio to decrease while maintaining desired workability and mix richness, ultimately enhancing concrete strength and durability performance.

Question 3

What problems can occur when aggregate size is too large?

Accepted Answer

Oversized aggregates reduce the bonding and strength of aggregate with cement mortar, creating fewer contact points for adhesion. They also produce microcracks at the coarse aggregate-cement interface and introduce discontinuities, resulting in heterogeneous concrete with reduced strength, durability, and structural reliability.

Question 4

What factors constrain the maximum aggregate size in concrete design?

Accepted Answer

Maximum aggregate size depends on concrete member dimensions and clear spacing between reinforcing bars. Additionally, the cost of stockpiling different aggregate sizes and preventing segregation during handling and placement are vital considerations in selecting optimal aggregate size for structural applications.

Question 5

What are typical maximum aggregate sizes for structural concrete?

Accepted Answer

For most structural concrete applications, maximum aggregate size is typically limited to either 25 millimeters or 40 millimeters, though conventionally it may be restricted to one inch or one and a half inches. These limits balance workability, strength, and practical handling requirements for construction.

Question 6

How does aggregate size affect water requirements in concrete?

Accepted Answer

Larger aggregates reduce the surface area needing cement paste coverage, significantly lowering overall water requirements in the concrete mix. This reduction allows engineers to decrease the water-to-cement ratio while maintaining desired workability and mix richness, resulting in enhanced concrete strength and improved long-term durability.

Question 7

What role does aggregate size play in concrete homogeneity?

Accepted Answer

Oversized aggregates introduce discontinuities and heterogeneity in the concrete mass, weakening the overall structure significantly. Proper maximum aggregate size selection ensures a more uniform, homogeneous concrete with better strength distribution, reduced risk of localized failure points, and improved structural performance.

骨料最大尺寸