孔径分布

Capillary pores are considerably larger than gel pores and form extensive networks within partially hydrated cement paste. This network increases permeability and susceptibility to freeze-thaw damage and chemical exposure. In well-hydrated pastes with low water-cement ratios, capillary pores range from 0.4 to 2 microinches, while high water-cement ratio pastes in early hydration stages contain pores spanning 120 to 200 microinches.

Sufficient hydration disrupts the capillary pore network by forming new cement gel, which segments and reduces pore sizes. This process enhances structural integrity and reduces permeability. The hydration level required depends on cement fineness and water-cement ratio, with lower water-cement ratios requiring shorter curing periods to achieve adequate hydration and improved durability.

Pore size distribution provides a more accurate assessment of hydrated cement paste properties than total capillary porosity alone. Macropores larger than 2 microinches play a critical role in strength and impermeability, while micropores influence drying shrinkage and creep. This distribution directly determines the concrete's ability to withstand environmental and structural stresses.

Water-cement ratio directly influences capillary pore dimensions. Low water-cement ratios in well-hydrated pastes produce capillary pores between 0.4 and 2 microinches, while high water-cement ratios with partial hydration create much larger pores ranging from 120 to 200 microinches. Lower ratios enhance durability and reduce permeability, making them preferable for concrete strength.

High capillary porosity increases concrete's susceptibility to freeze-thaw cycles and chemical exposure, reducing overall strength. The heightened permeability allows water and aggressive substances to penetrate the material more easily. Adequate hydration that disrupts the capillary pore network effectively mitigates these risks and enhances the concrete's resistance to environmental damage.

Macropores, defined as pores larger than 2 microinches or 50 nanometers, substantially impact concrete's strength and impermeability. These larger pores are believed to play a more critical role in material performance than smaller gel pores. Understanding macropore distribution is essential for predicting how concrete will withstand various structural and environmental stresses.

Cement fineness affects the hydration level required to disrupt capillary pore networks and achieve desired concrete properties. Finer cement particles hydrate more readily, allowing shorter curing periods to reach specific hydration degrees. Combined with appropriate water-cement ratios, cement fineness determines the final pore size distribution and resulting durability of the concrete.