示例：测量有障碍物的两点之间的距离

Measuring tape cannot span a lake because the distance is too wide for the tape to stretch across the water. This physical obstruction prevents direct measurement, requiring surveyors to use alternative techniques like the offset method to calculate the distance accurately without crossing the obstacle.

The offset method measures distances across obstacles by taking perpendicular measurements from an aligned baseline. Surveyors establish a baseline aligned with the obstruction, then measure perpendicular offsets from both ends toward the obstacle's edge using a compass to ensure right angles, creating a parallel line that can be measured.

A surveyor uses a telescope to align the side of an area across the lake from one end to the other, creating an imaginary reference line over the obstruction. This alignment provides clear, accurate reference points for taking perpendicular offset measurements from both ends of the baseline toward the lake's edge.

A compass ensures that perpendicular offset measurements are taken at right angles to the aligned baseline. By using a compass, the surveyor marks offset points on both sides of the lake at precise 90-degree angles, establishing a parallel line that accurately represents the distance across the obstruction.

The total distance is calculated by adding three components: the measurable distance before the lake, the span between the offset endpoints measured parallel to the baseline, and any additional distance after the lake. This cumulative measurement accurately reflects the true distance across the obstruction despite the inability to measure directly.

The baseline is aligned with the side crossing the obstacle and serves as the reference line. Perpendicular offsets extend at right angles from both ends of the baseline to the obstacle's edge, creating a parallel measurement line. Together, they enable accurate distance calculation when direct measurement is impossible.

Standard distance measurements by taping require direct line-of-sight and unobstructed paths. The offset method adapts this approach for obstacles by using perpendicular measurements and baseline alignment instead of stretching tape directly. This technique maintains measurement accuracy while working around physical obstructions like lakes or water bodies.