27.5
设计示例：使用罗盘标记场地边界
使用罗盘标记场地边界是一种精确的测量技术，可确保边界划分的准确性。该过程首先使用提供的场地详细信息，包括每条边界线的方位和长度。初始步骤涉及计算场地所有边的纵向和横向坐标增量。此计算可验证导线测量无误，从而确保边界封闭且准确。
该过程从已知点开始，例如点 A，该点通常与永久参考点对齐。使用指定的方位…
Consider the given site details, including side bearings and lengths, where latitudes and departures are determined to ensure accurate marking of site boundaries on the ground.
Firstly, the latitudes and departures of each side are calculated to check for errors. Here, there are no errors in the traverse.
Corner A is located on a permanent object, a survey benchmark.
The marking of the boundary starts with the side AB. From corner A, a range pole is aligned towards the point B through a compass using the specified bearing and length of AB.
Once point B is marked, the instrument is shifted to point B to range point A, cross-checking the back bearing of AB and then to range point C.
Further, the remaining corners are marked on the ground using the same procedure, and each side of the site is marked.
When point A is ranged from point D, it is observed that point A coincided with the bearings and the length of DA, verifying the accuracy of the survey.
View the full transcript and gain access to JoVE Core videos
Q1: Why is calculating latitudes and departures important before marking site boundaries?
Calculating latitudes and departures verifies that the traverse is free of errors and ensures a closed, accurate boundary. This computation checks the mathematical consistency of all side bearings and lengths before any ground marking begins, preventing costly mistakes during physical boundary delineation.
Q2: What is the role of a compass in marking site boundary corners?
A compass aligns a range pole toward each successive corner using the specified bearing and length of each boundary side. The surveyor positions the compass at each marked point to establish the direction and distance to the next corner, ensuring precise angular and linear accuracy throughout the boundary marking process.
Q3: How does back bearing verification improve survey accuracy?
Back bearing verification confirms that each marked side is correctly positioned by checking the reverse bearing from the newly established point back to the previous corner. This cross-check detects alignment errors immediately, allowing correction before proceeding to mark the next boundary segment.
Q4: What does it mean when the final survey point aligns with the starting point?
When the last marked point connects back to the starting point with matching bearings and length, the traverse is closed and the survey's precision is confirmed. This closure verification demonstrates that all corners were marked accurately and the boundary delineation is reliable for legal and construction purposes.
Q5: Why should the starting point be located on a permanent reference object?
Locating the starting point on a permanent reference object, such as a survey benchmark, provides a stable, identifiable baseline for the entire boundary marking process. This ensures the survey can be verified, replicated, or adjusted in the future without ambiguity about the original reference location.
Q6: What is the systematic procedure for marking all corners of a site?
The surveyor marks the first corner from the starting point using bearing and length, then relocates the compass to each newly marked corner to range and mark the next corner. This sequential procedure continues for all corners, with back bearings verified at each step to maintain accuracy throughout the entire boundary.
Q7: How does the range pole assist in boundary marking with a compass?
The range pole is aligned along the bearing direction established by the compass, providing a visible vertical reference that marks the exact location of each boundary corner. This physical marker allows the surveyor to establish precise points on the ground that correspond to the calculated bearings and distances.