Name: phragmoplast in plant cell division
Uploaded: 2023-04-30T18:28:51.000Z
Duration: 1 min 59 s
Channel: JoVE

K12 Standards

Pennsylvania State Academic Standards

9-12

Life Science

Inheritance and Variation of Traits

3.1.9-12.D

The Phragmoplast

Pflanzenzellen sind von einer starren Zellwand umgeben, die es den Zellen erschwert, sich durch Zusammenziehen von außen zu teilen. Pflanzenzellen teilen sich also, indem sie eine neue Zellwand zwischen den beiden Tochterkernen "von innen nach außen" bilden. Eine spezialisierte Struktur in Pflanzen, die Phragmoplasten, steuert die Bildung neuer Zellwände.
Die Zellteilungsebene, die der zukünftige Ort der Zellwandbildung ist, ist durch eine Präprophase-Bande aus Mikrotubuli und Aktinfilamenten gekennzeichnet, die sich während der G1-Phase des Zellzyklus bildet. Die Präprophasenbande baut sich an der Zellrinde an und verschwindet zu Beginn der M-Phase.
Während der Mitose trennen sich die Chromosomen und beginnen, sich zu entgegengesetzten Polen zu bewegen. An den Polen bildet sich die Kernhülle um die getrennten Chromosomen und die Spindeln beginnen zu verschwinden. Die restlichen Mikrotubuli der mitotischen Spindel bilden den Phragmoplasten.
Die Mikrotubuli der Phragmoplasten sind polar, mit Plus-Enden in der Nähe der Äquatorebene und Minus-Enden in der Nähe der Pole.
Golgi-Körper sezernieren kleine Vesikel, die von Motorproteinen entlang der Mikrotubuli zum Zellzentrum transportiert werden. Diese Vesikel sind mit Polysacchariden und Glykoproteinen gefüllt, zwei wichtigen Komponenten, die für die Synthese neuer Zellwände benötigt werden. Durch die Verschmelzung von Vesikeln entsteht eine scheibenförmige Struktur, die als frühe Zellplatte bezeichnet wird.
Die Mikrotubuli des Phragmoplasten werden erfolgreich an den freien Rändern der Zellplatte regeneriert, so dass der Phragmoplast die Platte lateral verlängern kann. Die neue Zellplatte verbindet sich mit den Mutterzellwänden an der Stelle, die vor der M-Phase durch die Präprophasenbande markiert war. Die Plasmamembran verschmilzt mit der Zellplatte und es bildet sich eine neue Zellwand, die die beiden Tochterzellen trennt.

<ol>
	<li>Molekularbiologie der Zelle, Alberts, 6. Auflage. Seiten 997-999.</li>
	<li>Seagull, Robert W. und B. Gunning. "Das pflanzliche Zytoskelett." Kritische Rezensionen in Plant Sciences 8, Nr. 2 (1989): 131-167.</li>
	<li>Hamada, Takahiro. "Mikrotubuli-Organisation und Mikrotubuli-assoziierte Proteine in Pflanzenzellen." In International Review of Cell and Molecular Biology, Bd. 312, S. 1-52. Akademischer Verlag, 2014.</li>
	<li>Fosket, D. E. "Eigenschaften von Pflanzenzellen, die für die Entwicklung wichtig sind." In Pflanzenwachstum und -entwicklung. Ein molekularer Ansatz. Akademischer Verlag San Diego, 1994.</li>
	<li>Casem, Merri Lynn, Hrsg. Fallstudien in der Zellbiologie. Akademischer Verlag, 2016.</li>
</ol>

der phragmoplast

Die Zellteilung ist essentiell für das Wachstum und die Entwicklung von Organismen. In tierischen Zellen bildet der zentrale Spindelapparat zusammen mit seinen assoziierten Proteinen den Midbody, eine Struktur, die eine wesentliche Rolle bei der Zytokinese spielt. In Pflanzenzellen reift der zentrale Spindelapparat zusammen mit den Mikrotubuli, Aktin und anderen Zellbestandteilen zum Phragmoplasten heran, der für die Zytokinese notwendig ist. Im Gegensatz zum stationären Midbody dehnt sich der Phragmoplast zentrifugal aus, was schließlich zur Bildung der neuen Zellwand führt.

Der ausgereifte Phragmoplast ist donutförmig und enthält eine äußere Führungsregion, eine mittlere Übergangszone und eine innere Nachhinkregion. In der Führungsregion werden kontinuierlich neue Mikrotubuli zusammengesetzt. Die Nukleation der Mikrotubuli wird durch den γ-Tubulin-Ringkomplex (γ-TuRC) eingeleitet, der sechs Untereinheiten—GCP1 bis GCP6—enthält. Allerdings kann γ-TuRC nicht direkt mit den Mikrotubuli interagieren; daher vermittelt Augmin, ein mit Mikrotubuli interagierender Proteinkomplex, die Rekrutierung von γ-TuRC zu den Mikrotubuli. Die Mikrotubuli im Phragmoplasten dienen als Bahnen für den Transport der Sekretvesikel, die vom nahegelegenen Golgi-Apparat produziert werden.

In der mittleren Übergangszone wandeln sich die Vesikel zunächst in röhrenähnliche Strukturen um und vernetzen sich anschließend zu einem ineinander verwobenen tubulären Netzwerk. Die kontinuierliche Hinzufügung von Sekretvesikeln führt zum Auswachsen des tubulären Netzwerks, bis es auf die Membran der Mutterzelle trifft. Die Vesikelmembranen werden verwendet, um die Plasmamembran der Tochterzellen zu bilden, während die Biomoleküle in den Vesikeln verwendet werden, um die Zellplatte zwischen den Membranen der beiden Tochterzellen zu bilden.

In der Nachhinkregion depolymerisieren die Mikrotubuli, wobei der ausgereifte Teil der Zellplatte zurückbleibt. Die vollständig gebildete Zellplatte entwickelt sich anschließend zur Zellwand, die die beiden Tochterzellen trennt. Die Polymerisation der Mikrotubuli am führenden Ende und die Depolymerisation der Mikrotubuli in der Nachhinkregion bewirken die zentrifugale Ausdehnung des Phragmoplasten und der Zellplatte, bis letztere mit der Zellwand der Elternzelle zusammenwächst. Ein Versagen der Phragmoplastfunktionen kann zu multinukleierten Zellen und embryonal letalen Phänotypen führen.

Der Phragmoplast

Die Zellteilung ist essentiell für das Wachstum und die Entwicklung von Organismen. In tierischen Zellen bilden die zentrale Spindel und die zugehörigen Proteine den Mittelkörper, einen ...

Education

Lehre

JoVE Core

Cell Biology

Zellbiologie

Unit 1

Einheit 1

Cell Division

Zellteilung

KEY TERMS AND CONCEPTS

KERNBEGRIFFE UND KONZEPTE

phragmoplast in plant cell division

The phragmoplast is a plant cell structure that forms during cell division. It helps guide the final stage of division, when the cell begins to split into two daughter cells.

In plant cells, the phragmoplast appears between the two new nuclei. It is part of the process that leads to the formation of a new cell wall. This wall separates the daughter cells after division is complete.

The phragmoplast plays an important role in plant cytokinesis, which is the physical division of the cytoplasm. It provides a framework for building the new partition between the cells. This makes it a key structure in plant cell division.

Phragmoplast in Plant Cell Division

mitosis and cytokinesis

Stages of Cell Division in Eukaryotes

Cell division in eukaryotes follows a tightly regulated cycle that includes cell growth, DNA replication, chromosome duplication, chromosome distribution to daughter cells, and cell division. Regulatory systems and extracellular signals help control when cells divide. In typical human cells, the cycle takes about 24 hours. The cycle has two major stages. DNA is copied during the S phase of interphase. The mitotic, or M, phase then separates the duplicated chromosomes into two new nuclei and...

chromosome duplication

Chromosome Copying in Cell Division

Chromosome copying is an important step in cell division. Before a cell divides, it must make an exact copy of its chromosomes so each new cell can receive the same genetic information. A chromosome is a DNA-containing structure that carries genes. During duplication, the chromosome is copied into two identical sister chromatids. These copies stay attached until the cell is ready to separate them. This process helps ensure that daughter cells inherit a complete set of chromosomes. Accurate...

cohesins

Cohesins in Sister Chromatid Separation

Cohesins are protein complexes that help hold sister chromatids together after DNA is copied. They play a key role in cell division by keeping the two copies of a chromosome connected until the right time. These proteins act like a link between the sister chromatids. When the cell is ready to separate them, cohesins must be removed or released so each new cell can get one complete set of chromosomes. Cohesins are an important part of chromosome behavior during mitosis and meiosis. Their...

condensins

Condensin Proteins in Chromosome Packing

Condensin proteins help pack DNA into condensed chromosomes during cell division. They are part of the larger set of proteins that organize genetic material so it can be separated correctly when a cell divides. These proteins act by shaping and tightening chromosome structure. This process is important because DNA must be compacted before it can move through the stages of division. Condensins are therefore closely linked to chromosome condensation, the step that makes chromosomes more compact...

the mitotic spindle

How the Mitotic Spindle Guides Cell Division

The mitotic spindle guides chromosome movement during cell division. It is a structure made of microtubules, which are thin protein fibers in the cell. These fibers organize and help separate the genetic material before the cell splits. The spindle forms as the cell prepares to divide. Its fibers attach to chromosomes and line them up so they can be moved apart in an orderly way. This careful organization helps each new cell receive the correct set of chromosomes. The mitotic spindle is a key...

centrosome duplication

Centrosome Duplication in Cell Division

Centrosome duplication is an important step in cell division. The centrosome helps organize the cell’s internal structure, and it must be copied before a cell divides.

spindle assembly

Spindle Formation in Cell Division

Spindle formation in cell division is the process that builds the microtubule-based spindle needed to separate chromosomes. Microtubules are long protein fibers that help move and organize cell parts during division. During this process, microtubules grow and are arranged into a spindle structure around the chromosomes. The spindle forms in a way that supports chromosome movement to opposite sides of the cell. This step is essential for accurate cell division. Spindle formation depends on the...

attachment of sister chromatids

Sister Chromatid Attachment in Mitosis

Sister chromatid attachment in mitosis helps align duplicated chromosomes before they separate. Sister chromatids are the matching copies made after DNA replication. They stay connected until the cell is ready to divide. The attachment step is closely tied to the metaphase plate, the middle of the cell where chromosomes line up. This alignment helps each new cell receive one copy of every chromosome. Proper attachment is an important part of accurate cell division.

forces acting on chromosomes

Chromosome Movement During Cell Division

Chromosome movement during cell division depends on forces that act on the chromosomes. These forces help move the chromosomes into the right position as the cell divides. The transcript focuses on how these forces affect chromosome behavior during division. It highlights the role of the mitotic spindle, which is the structure that helps organize and move chromosomes. The spindle uses force to guide chromosome movement at the right time. Understanding these forces helps explain how...

separation of sister chromatids

Chromatid Pulling in Cell Division

Separation of sister chromatids is a key step in cell division. Sister chromatids are two identical copies of a chromosome that stay attached until the cell is ready to split them apart. Their separation helps each new cell receive the correct genetic material. During this stage, the sister chromatids are pulled to opposite sides of the cell. This movement happens as the cell prepares to divide into two daughter cells. Once the chromatids separate, each side of the cell has a complete set of...

the spindle assembly checkpoint

How Cells Verify Chromosome Spindle Attachment

The spindle assembly checkpoint helps cells verify that chromosomes are attached to the spindle before division continues. It acts as a safety step during cell division and helps prevent errors in chromosome separation. This checkpoint is controlled by kinetochores, which are protein structures on chromosomes that connect to spindle fibers. If a chromosome is not attached correctly, the checkpoint can delay progression until the problem is fixed. Once the attachment is correct, the cell can...

anaphase a and b

Chromosome and Spindle Movement in Anaphase

Anaphase is the stage of cell division when chromosomes move apart. In this phase, sister chromatids separate and travel toward opposite poles of the cell. Chromosome movement in anaphase can happen in two ways. In anaphase A, chromosomes move closer to the poles as the microtubules attached to them shorten. In anaphase B, the spindle poles themselves move farther apart and help stretch the cell. These two movements work together to ensure that the separated chromosomes are pulled to opposite...

anaphase promoting complex

Cell Cycle Control by APC

The anaphase-promoting complex, or APC, helps control cell cycle progression. It acts during cell division to help move the process from one stage to the next. This control is important for proper timing in the cell cycle. APC is a protein complex that works as a regulator. It helps trigger key steps that allow division to continue in an ordered way. By guiding this transition, APC supports normal cell cycle control.

the contractile ring

Cell Division and the Contractile Ring

The contractile ring helps cells divide at the end of cell division. It forms at the cell's center and tightens to split one cell into two. This process is part of cytokinesis, the stage when the cytoplasm divides. The ring is made of actin and myosin, two proteins that can work together to create force. As the ring contracts, it draws the cell membrane inward. This pinch helps separate the two daughter cells. Understanding the contractile ring is important for studying how cells complete...

determining the plane of cell division

Spindle Position and Cell Division Plane

The plane of cell division is set by the position of the spindle during mitosis. Cells use this internal structure to help decide where the cell will split. The result affects how the two daughter cells are arranged after division. This process is important in many developing tissues. It helps explain how cells divide in a controlled direction. A clear plane of division supports proper cell organization as new cells form. The transcript focuses on how the spindle is used to determine that...

the phragmoplast

The phragmoplast is a plant cell structure that forms during cell division. It helps guide the final stage of division, when the cell begins to split into two daughter cells. In plant cells, the phragmoplast appears between the two new nuclei. It is part of the process that leads to the formation of a new cell wall. This wall separates the daughter cells after division is complete. The phragmoplast plays an important role in plant cytokinesis, which is the physical division of the cytoplasm.

distribution of cytoplasmic content

Cytoplasmic Content During Cell Division

Cytoplasmic content is distributed as a cell divides. This process helps each new cell receive the materials it needs to function. The cytoplasm includes the fluid and structures inside the cell membrane, but outside the nucleus. During cell division, this content is separated between the two daughter cells. The division must be organized so both cells can continue normal activity after the split. The video focuses on how this distribution occurs as part of cell division. It highlights the...

key terms and concepts

Learn how the phragmoplast helps plant cells complete division by guiding cytokinesis and the formation of a new cell wall between daughter cells.

Phragmoplast in Plant Cell Division | JoVE K12

cell biology

JoVE Core Zellbiologie veranschaulicht komplexe zelluläre Prozesse in leicht verständlichen und dennoch umfassenden animierten Videolektionen. Diese Sammlung konzentriert sich auf die wesentlichen Bestandteile und Funktionen von Zellen, einschließlich Organellen und Membranen, Zelltransport und Zellenergie. Ergänzt wird sie durch Videos von Wissenschaftlern in Aktion, die die Anwendung der Zellbiologie in realen Forschungsexperimenten demonstrieren.

Louisiana Student Standards for Science

High School

Life Sciences

from-molecules-to-organisms-structures-and-processes

From Molecules To Organisms: Structures And Processes

HS-LS1-4

Tennessee Academic Standards

Biology

From Molecules to Organisms: Structures and Processes

BIO1.LS1.6

Minnesota Academic Standards in Science

3.1.1 9L.3.1.1.2

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

Arizona Science Standards

HS+B.L1

HS+B.L1U1.9

Alabama Course of Study Science

9-12.B.1.3

Florida Department of Education

SC.912.L.16

SC.912.L.16.14

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

B-LS1-4.

What is the Cell Cycle?

The cell cycle refers to the sequence of events occurring throughout a typical cell&#8217;s life. In eukaryotic cells, the somatic cell cycle has two ...

Interphase

The cell cycle occurs over approximately 24 hours (in a typical human cell) and in two distinct stages: interphase, which includes three phases of the ...

The Cell Cycle Control System

Positive Regulator Molecules

Inhibition of CDK Activity

Mitosis and Cytokinesis

In eukaryotes, the cell division cycle is divided into distinct, coordinated cellular processes that include cell growth, DNA replication/chromosome ...

Chromosome Duplication

Cohesins

Condensins

The Mitotic Spindle

Centrosome Duplication

Spindle Assembly

Attachment of Sister Chromatids

Forces Acting on Chromosomes

Separation of Sister Chromatids

The Spindle Assembly Checkpoint

Anaphase A and B

Anaphase Promoting Complex

The Contractile Ring

Determining the Plane of Cell Division

Distribution of Cytoplasmic Content

An Introduction to Cell Division

Cell division is the process by which a parent cell divides and gives rise to two or more daughter cells. It is a means of reproduction for single-cell ...

Cell Cycle Analysis

Cell cycle refers to the set of events through which a cell grows, replicates its genome, and ultimately divides into two daughter cells through the ...

Live Cell Imaging of Mitosis

Mitosis is a form of cell division in which a cell&#8217;s genetic material is divided equally between two daughter cells. Mitosis can be broken down into ...

Fertilization

During fertilization, an egg and sperm cell fuse to create a new diploid structure. In humans, the process occurs once the egg has been released from the ...

Cleavage and Blastulation

After a large-single-celled zygote is produced via fertilization, the process of cleavage occurs while zygotes travel through the uterine tube. Cleavage ...

Gastrulation

Gastrulation establishes the three primary tissues of an embryo: the ectoderm, mesoderm, and endoderm. This developmental process relies on a series of ...

Neurulation

Neurulation is the embryological process which forms the precursors of the central nervous system and occurs after gastrulation has established the three ...

Cell Migration

Cell migration, the process by which cells move from one location to another, is essential for the proper development and viability of organisms ...

an-introduction-to-developmental-genetics

An Introduction to Developmental Genetics

Development is the complex process through which a single-celled embryo transforms into a multicellular organism. Developmental processes are guided by ...

An Introduction to Organogenesis

Organogenesis is the process by which organs arise from one of three germ layers during the later stages of embryonic development. Researchers studying ...

Fate Mapping

Fate mapping is a technique used to understand how embryonic cells divide, differentiate, and migrate during development. In classic fate mapping ...

Students who demonstrate understanding can use a model to illustrate the role of cellular division (mitosis) and differentiation in producing and maintaining complex organisms.  Assessment Boundary: Assessment does not include specific gene control mechanisms or rote memorization of the steps of mitosis.

DNA Packaging

DNA as a Genetic Template

Two structural features of the DNA molecule provide a basis for the mechanisms of heredity: the four nucleotide bases and its double-stranded nature. The ...

Organization of Genes

Structure of a Gene

A gene is the fundamental unit of heredity. Every individual has two copies of each gene, one inherited from each parent. Although most people contain the ...

Chromosome Structure

A functional eukaryotic chromosome must contain three elements: a centromere, telomeres, and numerous origins of replication.
The centromere is a DNA ...

Chromosome Replication

Before a cell can divide, it must accurately replicate all of its chromosomes, including the DNA and its associated histone and non-histone ...

The Nucleosome

DNA in a human cell is almost 2m long and it is packed inside a tiny nucleus that is only a few microns in diameter. The level of compaction of DNA inside ...

The Nucleosome Core Particle

Nucleosomes are the DNA-histone complex, where the DNA strand is wound around the histone core. The histone core is an octamer containing two copies of ...

Nucleosome Remodeling

Nucleosomes are the basic units of chromatin compaction. Each nucleosome consists of the DNA bound tightly around a histone core, which makes the DNA ...

Chromatin Packaging

Each human somatic cell contains 6 billion base-pairs of DNA. Each base-pair is 0.34 nm long, which means that each diploid cell contains a staggering 2 ...

Karyotyping

Proteins: From Genes to Degradation

The DNA Helix

Deoxyribonucleic acid, or DNA, is the genetic material responsible for passing traits from generation to generation in all organisms and most viruses. DNA ...

The Central Dogma

The central dogma explains the flow of genetic information from DNA nucleotides to the amino acid sequence of proteins.
RNA is the Missing Link Between ...

Mutations

Mutations are changes in the sequence of DNA. These changes can occur spontaneously or they can be induced by exposure to environmental factors. Mutations ...

genome-size-and-the-evolution-of-new-genes

Genome Size and the Evolution of New Genes

Gene Families

Students who demonstrate understanding can ask questions to clarify relationships about the role of DNA and chromosomes in coding the instructions for characteristic traits passed from parents to offspring. Assessment Boundary: Assessment does not include the phases of meiosis or the biochemical mechanism of specific steps in the process.

3.1.9-12.P

Genomic DNA in Prokaryotes

The genome of most prokaryotic organisms consists of double-stranded DNA organized into one circular chromosome in a region of cytoplasm called the ...

Binary Fission

Fission is the division of a single entity into two or more parts, which regenerate into separate entities that resemble the original. Organisms in the ...

Genomic DNA in Eukaryotes

Eukaryotes have large genomes compared to prokaryotes. To fit their genomes into a cell, eukaryotic DNA is packaged extraordinarily tightly inside the ...

What is Meiosis?

Meiosis is the process by which diploid cells divide to produce haploid daughter cells. In humans, each diploid cell contains 46 chromosomes, half from ...

Meiosis I

Meiosis is a carefully orchestrated set of cell divisions, the goal of which&#x2014;in humans&#x2014;is to produce haploid sperm or eggs, each containing ...

Meiosis II

Meiosis II is the second and final stage of meiosis. It relies on the haploid cells produced during meiosis I, each of which contain only 23 ...

Crossing Over

Unlike mitosis, meiosis aims for genetic diversity in its creation of haploid gametes. Dividing germ cells first begin this process in prophase I, where ...

Students who demonstrate understanding can make and defend a claim based on evidence that inheritable genetic variations may result from (1) new genetic combinations through meiosis, (2) viable errors occurring during replication, and/or (3) mutations caused by environmental factors. Assessment Boundary: Assessment does not include the phases of meiosis or the biochemical mechanism of specific steps in the process.

3.1.9-12.Q

Phragmoplast in Plant Cell Division

Description

Transcript

Tags

More videos by Standards