Name: sampling materials in solid, liquid, gas
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 1 min 18 s
Channel: JoVE

Es gibt drei Arten von Probenahmematerialien: fest, flüssig und gasförmig. Feste Proben können Sedimente enthalten, die sich in Gewässern, Gesteinen, Metallen und biologischem Gewebe angesammelt haben.
Sedimente in Gewässern werden mit einem Probenehmer oder einem Kolbenbohrer extrahiert. Wenn beispielsweise ein Probenehmer in ein Flussbett abgesenkt wird, schließt sich der Probenehmer um das Sediment, um eine Probe zu entnehmen. 
Einige Beispiele für flüssige Proben sind Wasser, Blut, Urin und Lösungsmittel. Ein genaues Volumen der homogenen Flüssigkeit wird mit einer Pipette oder Spritze aufgefangen.
Die Proben können aus heterogenen Flüssigkeiten, wie z. B. Industrieabwässern, mit einem automatisierten Probenehmer entnommen werden, der sie in regelmäßigen Abständen sammelt.
Gasförmige Proben können zur Analyse aus der atmosphärischen Luft, Abluftöffnungen und industriellen Schornsteinen entnommen werden.
Feste Sorptionsmittel, wie z. B. Aktivkohle, werden häufig verwendet, um Zielverbindungen aus dem Gasstrom selektiv zu adsorbieren. Die Zielverbindung wird dann durch Desorptionstechniken extrahiert und mit geeigneten Analysemethoden analysiert.

probenentnahmemethoden: probenarten

Probenmaterialien werden in drei Hauptarten eingeteilt: fest, flüssig und gasförmig.

Feste Proben umfassen eine Vielzahl von Substanzen, wie Sedimente aus Gewässern, Erde, Metalle und biologisches Gewebe. Zwei Standardmethoden zur Entnahme von Sedimenten aus Gewässern sind die Stichprobenentnahme und die entnahme eines Sedimentskerns mithilfe des Kolbenbohrers. Bei der Stichprobenentnahme wird mit einem Gerät eine diskrete Sedimentprobe vom Boden eines Gewässers mit minimaler Störung entnommen. Stichprobenentnahmen repräsentieren aufgrund der räumlichen Variabilität (Variation an verschiedenen Standorten) nicht immer das gesamte Gebiet. Der Kolbenbohrer ist eine Gerät zur Entnahme einer kontinuierlichen Sedimentsäule, mit der sich Veränderungen innerhalb der Sedimentschichten im Laufe der Zeit analysieren lassen.

Eine Probe kann mit einer sauberen Probenflasche für Oberflächengewässer wie Seen oder Flüsse entnommen werden. Die Flasche sollte bis zur gewünschten Tiefe eingetaucht werden, um eine Kontamination zu minimieren. Bei der Blutentnahme wird normalerweise eine Spritze in eine Vene eingeführt, um ein bestimmtes Blutvolumen zu entnehmen. Die Probe wird dann zur weiteren Analyse in die entsprechenden Behälter überführt. Bei der Urinentnahme wird ein bestimmtes Urinvolumen in einem sauberen Behälter entnommen. Die Urinprobe wird dann zur Analyse in geeignete Behälter überführt. Industrielle Abwässer sind häufig heterogene Flüssigkeiten, die verschiedene Chemikalien und Schadstoffe enthalten. Die Probenahme solcher Abwässer erfordert normalerweise einen automatischen Probenehmer, ein Gerät, das in regelmäßigen Abständen Proben entnimmt. Dieses Gerät ist so programmiert, dass es in vorgegebenen Zeitabständen repräsentative Proben entnimmt und die Zusammensetzung der Abwässer umfassend analysiert.

Zur Gasprobenahme werden üblicherweise feste Sorptionsmittel wie Aktivkohle verwendet, um gezielt die gesuchten Verbindungen aus einem Gasstrom zu adsorbieren. Die an Aktivkohle adsorbierten Verbindungen können durch verschiedene Desorptionsmethoden wie Erhitzen und Lösungsmittelextraktion extrahiert werden. Abhängig von der spezifischen Verbindung und den benötigten Informationen können die extrahierten Verbindungen dann mithilfe von Analyseverfahren wie Spektroskopie oder Chromatographie weiter bestimmt werden.

Probenentnahmemethoden: Probenarten

Probenahmematerialien werden in drei Haupttypen eingeteilt: fest, flüssig und gasförmig.
Feste Proben enthalten eine Vielzahl von Substanzen, wie z. B. Sedimente aus ...

Education

Lehre

JoVE Core

Analytical Chemistry

Analytische Chemie

Unit 1

Einheit 1

Method Development and Sampling Techniques

Methodenentwicklung und Probenahmetechniken

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

WICHTIGE BEGRIFFE UND KONZEPTE

Sampling Methods: Sample Types

sampling materials in solid, liquid, gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues.

Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a continuous column of sediment. This lets scientists study changes over time in the sediment layers.

Liquid samples are often collected with clean tools to reduce contamination. A sampling bottle can be used for surface water in lakes or rivers. The bottle is submerged to the desired depth before the sample is taken. Blood is usually sampled with a syringe placed into a vein to draw a set volume, then the blood is moved into the correct container for analysis. Urine sampling uses a clean container to collect a measured amount of urine before transfer to suitable containers.

Industrial effluents are often mixed liquids that contain many chemicals and pollutants. They are commonly sampled with an automatic sampler. This device collects samples at set time intervals so the sample better reflects the effluent composition. Gas sampling often uses solid sorbents such as activated carbon. The target compounds are adsorbed onto the carbon, then removed by desorption methods such as heating or solvent extraction. The extracted compounds can then be studied with techniques like spectroscopy or chromatography.

Sampling Materials in Solid, Liquid, Gas

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Explore how solid, liquid, and gas samples are collected, from sediment cores and water bottles to blood, urine, effluents, and activated carbon gas sampling.

Sampling Materials in Solid, Liquid, Gas | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Sampling Materials in Solid, Liquid, Gas

Description

Transcript

Tags