Name: fermentation methods for industrial production
Uploaded: 2026-03-12T13:57:32.000Z
Duration: 1 min 14 s
Channel: JoVE

In bioreactors, microbes can be grown using two main culture methods - batch and continuous.Batch culture is a closed system where microbes grow in a fixed volume of nutrient medium.All the required nutrients are added at the beginning, and apart from gases, nothing is added or removed during the incubation.The batch culture follows the typical growth curve consisting of the lag, exponential, stationary, and eventually the death phase.Once nutrients are exhausted, microbial growth stops, and the final product is harvested.On the other hand, a continuous culture, often performed in a Chemostat, is an open system. Fresh nutrient medium is continuously added, while an equal volume of culture is simultaneously removed.This setup maintains a constant volume and steady state by replenishing nutrients and removing waste.As a result, microbes remain in the exponential growth phase for a longer time, ensuring steady-state growth and consistent productivity.

batch vs continuous culture

Batch vs Continuous Culture

Fermentation is a foundational biotechnological process used to produce pharmaceuticals, biofuels, enzymes, and food additives. Among industrial strategies, batch and continuous fermentation are the two most widely applied. Although both rely on microbial conversion of substrates into desired products, they differ markedly in operation, productivity, and suitability for specific applications.Batch fermentation occurs in a closed system in which nutrient media and inoculum are added at the start, with no further input except for gas exchange and pH control. Microbial growth proceeds through lag, exponential, stationary, and decline phases. As nutrients diminish and inhibitory by-products accumulate, metabolic activity slows, and the product&#8212;often accompanied by waste metabolites and cell debris&#8212;is harvested at the end. Batch systems are particularly advantageous for producing secondary metabolites such as antibiotics, which are typically synthesized during the stationary phase. They also require lower initial investment, simpler equipment, and pose reduced contamination risk, since a failure affects only one batch. However, batch processes suffer from lower overall productivity, significant downtime for cleaning and sterilization, and greater batch-to-batch variability.Continuous fermentation, by contrast, is an open system in which fresh medium is continuously supplied while product-containing broth is simultaneously removed. This maintains microorganisms in exponential growth, where metabolic rates are highest. Continuous systems operate either as turbidostats, which regulate culture density via optical feedback, or chemostats, which control growth through nutrient feed rates. This strategy is highly effective for producing primary metabolites such as ethanol, lactic acid, and single-cell proteins. Continuous fermentation offers high productivity, uniform product quality, and minimal downtime, but requires advanced automation, higher capital investment, and carries increased contamination risk due to prolonged operation.Choosing between batch and continuous fermentation depends on metabolite type, production scale, process complexity, and economic considerations. Batch systems excel for complex, low-volume products, while continuous systems are preferred for high-volume, cost-efficient manufacturing of uniform primary metabolites.

Fermentation is a foundational biotechnological process used to produce pharmaceuticals, biofuels, enzymes, and food additives. Among industrial ...

https://cloudfront.jove.com/files/ftp_upload/40774/40774_article_thumb_40774.jpg

Education

JoVE Core

Microbiology

Unit

Industrial Microbiology

KEY TERMS AND CONCEPTS

fermentation methods for industrial production

Fermentation methods for industrial production use microbes to make pharmaceuticals, biofuels, enzymes, and food additives. The two main approaches are batch fermentation and continuous fermentation. Both depend on microbial conversion of a substrate into a desired product, but they differ in how the culture is run and how the product is collected.

Batch fermentation is a closed system. Nutrient medium and inoculum are added at the start, and no more material is fed in except for gas exchange and pH control. The microbes then move through lag, exponential, stationary, and decline phases. As nutrients run low and inhibitory by-products build up, metabolic activity slows. The product is harvested at the end, often with waste metabolites and cell debris.

Batch systems are useful for secondary metabolites such as antibiotics. These products are usually made during the stationary phase. Batch fermentation also has a lower initial cost, simpler equipment, and a lower contamination risk. If contamination or failure happens, only one batch is affected. The trade-off is lower overall productivity, more downtime for cleaning and sterilization, and greater batch-to-batch variation.

Continuous fermentation is an open system. Fresh medium is added all the time, while product-containing broth is removed at the same time. This keeps the microorganisms in exponential growth, where metabolic rates are highest. Continuous systems may work as turbidostats, which use optical feedback to control culture density, or as chemostats, which control growth through nutrient feed rates.

Continuous fermentation is well suited for primary metabolites such as ethanol, lactic acid, and single-cell proteins. It offers high productivity, uniform product quality, and little downtime. It also needs advanced automation, higher capital investment, and it carries a higher contamination risk because the process runs for a long time. The best choice depends on the metabolite, production scale, process complexity, and cost. Batch systems fit complex, low-volume products, while continuous systems fit high-volume manufacturing of uniform primary metabolites.

Fermentation Methods for Industrial Production

fermentation-methods-for-industrial-production

bioreactor design and operational system

Bioreactor Types and Key Features

Bioreactors are engineered vessels that grow microorganisms under controlled conditions for bioprocessing. They keep the system sterile and let operators control pH, temperature, oxygen, and nutrient levels. These settings help support microbial growth and the production of useful metabolites. Bioreactors come in a wide size range. Some are small laboratory units that hold 1 liter, while industrial systems can hold up to 500,000 liters. In many systems, only about 75% of the vessel volume is...

bioreactor controls-i

Fermenter Monitoring and Control

Fermenter monitoring and control keeps microbial growth conditions stable in fermentation systems. Temperature, foam, pH, carbon dioxide, oxygen, and pressure all need careful measurement. These settings help improve productivity and process efficiency. Temperature control is especially important because many fermentation reactions release heat. Small laboratory fermenters may use mercury-in-glass thermometers, resistance thermometers, or thermistors. Mercury thermometers are often used for...

bioreactor controls-ii

Oxygen Transfer in Stirred Fermentors

Oxygen transfer in stirred fermentors is essential for aerobic fermentation. Microbes need oxygen for growth and for making useful products. This can be difficult because air contains only about 20% oxygen, and oxygen dissolves poorly in water. At 20°C, its solubility is only about 9 ppm. In some high-demand processes, such as yeast growth or citric acid production, even a saturated broth may supply oxygen for only a few seconds. To improve oxygen delivery, sterile or scrubbed air is fed into...

bioreactor controls-iii

Engineering Yeast for Higher Product Yields

Strain improvement helps industrial microbiology make more product from microbes such as Saccharomyces cerevisiae. Natural isolates often produce useful compounds in very low amounts. Medium changes and growth condition changes can help, but their effect is limited by the organism’s genes. Because of that limit, scientists often improve the strain first and then adjust the culture conditions again. This cycle can repeat several times and lead to better overall output. S. cerevisiae is a common...

designing growth media for bioreactors

Key Ingredients in Bioreactor Growth Media

Growth media for bioreactors supply the nutrients cells need for growth and metabolism. A well-balanced medium can improve the yield of useful products such as enzymes, antibiotics, and biomass. If nutrients are too low or too high, cell growth and product output can drop. A typical growth medium includes a carbon source, a nitrogen source, salts, vitamins, trace elements, and water. Carbon sources such as glucose or glycerol provide energy and building blocks for biomass. Nitrogen sources...

methods of medium optimization

Screening Variables in Medium Optimization

Microbial growth media can be improved by testing which ingredients most affect growth and product yield. Statistical experimental design gives a structured way to do this. It also makes the process more reproducible and efficient. The One-Factor-at-a-Time, or OFAT, method changes one variable while all others stay the same. This approach is simple, but it cannot show interactions between variables. When two factors work together, OFAT may miss that effect and lead to a less effective result. <br...

Fermentation methods for industrial production use microbes to make pharmaceuticals, biofuels, enzymes, and food additives. The two main approaches are batch fermentation and continuous fermentation. Both depend on microbial conversion of a substrate into a desired product, but they differ in how the culture is run and how the product is collected. Batch fermentation is a closed system. Nutrient medium and inoculum are added at the start, and no more material is fed in except for gas exchange...

fed-batch culture

Fed-Batch Feeding Strategies

Fed-batch culture uses controlled feeding to guide cell growth and product formation in bioprocessing. It combines features of batch culture with nutrient additions during fermentation. In this semi-closed system, fresh substrate is added while the biomass and products stay in the bioreactor until the run ends. This feeding control helps manage growth rate, nutrient limits, and the buildup of metabolites. By adjusting when and how substrate is added, the process can support longer production...

scale-up processes

Fermenter Materials and Contamination Control

Microbial fermentation scale-up depends on fermenter materials and contamination control as production moves from the lab to the factory. The goal is to keep yield and product quality stable while the culture volume gets larger. That requires changes in equipment design, process settings, and cleaning methods. At the laboratory scale, cultures are usually grown in 1 to 10 liter glass or autoclavable plastic fermenters. These materials make sterilization easier and allow careful control of...

upstream processing

Bioreactor Growth in Biomanufacturing

Bioreactor growth is a key part of biomanufacturing. It uses microorganisms, mammalian cells, or insect cells to make therapeutic proteins, vaccines, enzymes, and other biologically derived products. The process includes choosing and preparing the production organism and then growing it under tightly controlled conditions. The first step is host selection and genetic optimization. A host can be a natural strain, a cell line, or a genetically modified organism designed to make the target...

downstream processing

Purifying Products After Fermentation

Purifying products after fermentation starts once the growth stage is finished. The goal is to recover useful products such as acids, vitamins, antibiotics, or proteins and remove the unwanted material around them. The first step is often cell harvesting. For intracellular protein-based products, the cells are separated from the liquid phase by centrifugation or filtration. If the target product is inside the cells, those cells must then be broken open. Cell disruption releases the contents...

production of alcohol

Continuous Ethanol Fermentation

Continuous ethanol fermentation is the process used to make alcohol in a steady, nonstop flow. It is valued in industry because it supports efficiency, scale, and high ethanol output. The feedstock is corn starch, which must first be broken down into sugars before microbes can ferment it. Corn starch undergoes enzymatic hydrolysis, which means enzymes split starch into smaller sugar molecules. The enzymes used are α-amylase and glucoamylase. They convert the starch into fermentable sugars such...

production of organic acids

Microbial Fermentation for Lactic Acid

Microbial fermentation is used to produce lactic acid from starch-based raw materials. This organic acid is important in food, pharmaceutical, and biodegradable polymer industries. It is often preferred over chemical synthesis because it is more sustainable and can produce an enantiomerically pure product. The process starts with starch hydrolysis. Starch-rich feedstocks such as corn and potatoes are broken down to release fermentable sugars. This can be done with amylase enzymes or with...

production of antibiotics

Industrial Penicillin Fermentation Process

Industrial penicillin is made by growing the fungus Penicillium chrysogenum in large stirred-tank bioreactors. These tanks can range from tens to hundreds of thousands of liters. The process depends on close control of temperature, pH, and dissolved oxygen so the fungus can keep making the antibiotic efficiently. Penicillin is a secondary metabolite, which means the fungus makes it mainly during the stationary phase of growth. To support this shift, the feed strategy must limit rapid cell...

production of pharmaceuticals

Making Human Insulin in Bacteria

Industrial insulin production uses genetically engineered E. coli to make human insulin at large scale. The bacteria carry a proinsulin gene under a tryptophan promoter, and the gene includes a methionine linker so the product can be cut later. The cells also contain ampicillin resistance, which helps with selective growth during culture. Production starts with seed cultures stored at −80 °C. A small amount is thawed to begin starter cultures, and the culture is expanded step by step until it...

production of biopesticides

Bt Biopesticides and Crop Protection

Bt biopesticides use Bacillus thuringiensis to help protect crops from insect pests. Bt is a bacterium that is valued for its strong insect-killing activity, its specificity to target insects, and its natural breakdown in the environment. Because of these traits, it offers a more sustainable option than many chemical pesticides. Bt makes insecticidal crystal proteins, also called Cry proteins, during sporulation. Sporulation is the stage when the bacterium forms spores. The Cry proteins form...

ichip

Growing Hidden Microbes with iChip

The iChip helps scientists grow environmental microbes that are hard to culture in the lab. It solves a long-standing problem in microbiology by giving cells conditions that are closer to their natural habitat. The method uses in situ incubation, which means the sample grows in the environment where it was collected. The isolation chip, or iChip, is built for high-throughput microbial cultivation. It contains hundreds of tiny microchambers, and each chamber can hold one microbial cell. The...

vaccine production

Vaccine Manufacturing: Purification to Packaging

Vaccine manufacturing turns cultured microorganisms into a safe immunological product. The process starts with growing viruses or bacteria to collect antigenic material, which is the part of the pathogen that helps trigger an immune response. For viral vaccines, mammalian host cells are first grown in bioreactors. The target virus is then added so it can replicate inside the cells. After the cells lyse, or break open, the viral particles are released. The mixture is clarified by filtration or...

bioplastics

Microbial PHAs for Sustainable Plastics

Microbial PHAs are a sustainable option for making plastics from bacteria instead of petroleum. These bioplastics are known as polyhydroxyalkanoates, or PHAs, and one important example is polyhydroxybutyrate, or PHB. They are valued because they can break down in the environment and are also compatible with living tissue. Bacteria such as Cupriavidus necator and Pseudomonas putida make PHAs inside their cells. They store these polymers as carbon and energy reserves. PHA buildup is especially...

microbial biosensors

Microbes as Sensors for Chemical Detection

Microbes can be used as sensors to detect specific chemicals by producing a measurable signal. These microbial biosensors are analytical devices that combine living cells with a signal-transducing element. The biosensing organisms are often Escherichia coli or Saccharomyces cerevisiae, and they are commonly placed in multiwell plates for rapid, real-time detection of target analytes. When a target analyte, such as sucrose, interacts with the microbes, the cells respond biochemically. That...

biological treatment of effluent and waste water 

biological-treatment-of-effluent-and-waste-water

Steps in Wastewater Cleanup by Microbes

Wastewater cleanup often uses microbes to remove pollutants from sewage. Modern treatment systems do this in stages. Each stage lowers solid waste, dissolved organic matter, and microbial contamination. The treated water is then prepared for safe discharge or reuse. Primary treatment is the first physical step. Screening removes large debris, and sedimentation lets suspended particles settle out of the wastewater. This lowers the amount of material that later treatment steps must handle. <br...

biofuels

Microalgae Biodiesel Production

Microalgae can be used to make biodiesel, a renewable fuel made from biological material. These photosynthetic microorganisms grow quickly and turn sunlight and carbon dioxide into biomass. They can also grow in freshwater, marine water, and wastewater, which makes them flexible feedstocks for fuel production. Microalgae are especially useful because they can build up large amounts of lipids, or fats, in their cells. When growth conditions are good, they multiply rapidly. When nutrients become...

key terms and concepts

Compare batch and continuous fermentation, including growth phases, metabolite types, productivity, contamination risk, and industrial uses in biotechnology.

Fermentation Methods for Industrial Production | JoVE K12

JoVE Core Microbiology provides an engaging introduction to the microbial world and its influence on health, industry, and the environment. This comprehensive collection covers key concepts such as microbial structure, metabolism, genetics, and ecology. It introduces essential laboratory techniques and microscopy methods through visually engaging animations. Corresponding scientist-in-action videos bridge classroom concepts with real-world research and applications.

microbiology

Fermentation Methods for Industrial Production

Description

Transcript

Tags