Injection Port
Injection Port - Related Videos
07:17
Single Port Donor Nephrectomy
0 Views •
Cited by 5 •
2011
Single port laparoscopic surgery is changing the standard of care in surgical care like nothing since the laparoscopic technique was introduced 20 years ago. We present out technique of single port donor nephrectomy using the Gelpoint device. We have successfully performed this surgery in 100 patients.
05:51
Computed Tomography (CT) Guided Implantation of a Totally Implantable Venous Access Port (TIVAP) through Subclavian Vein
0 Views •
2026
Implantation of a totally implantable venous access port (TIVAP) through the subclavian vein under CT guidance is a highly safe and precise method that can effectively reduce the incidence of complications and facilitate early detection of potential complications.
03:08
Single-port Robotic Transanal Total Mesorectal Excision in a Porcine Model (Sus scrofa domesticus)
0 Views •
2026
This protocol demonstrates Single-port (SP) robotic transanal total mesorectal excision (taTME) in a porcine model, highlighting procedural feasibility, technical steps, and preclinical applicability for minimally invasive rectal surgery.
11:49
Single-port Non-liposuction Endoscopic Axillary Lymph Node Dissection in Breast Cancer Surgery
0 Views •
2026
This study describes a standardized surgical procedure for single-port endoscopic axillary lymph node dissection without liposuction in breast cancer. Indicated for patients with biopsy-confirmed nodal metastasis or positive sentinel lymph nodes, the technique emphasizes preservation of critical structures, particularly the intercostobrachial nerve, to reduce postoperative morbidity and optimize functional recovery.
06:54
Injection of An. stephensi Embryos to Generate Malaria-resistant Mosquitoes
0 Views •
Cited by 9 •
2007
Anopheles stephensi mosquitoes are vectors for malaria inhabiting India and throughout Asia. This video demonstrates the technique for performing microinjections of this species with transgenes that will confer resistance to the malaria to the mosquito. Much of the methodology demonstrated in this video is applicable to microinjection techniques of other mosquito species.
FAQs
Split and splitless operation regulate how much vaporized sample reaches the separation system. Split operation sends only part of the introduced material onward, whereas splitless operation allows a greater proportion to enter. This setting directly influences sensitivity and the amount of analyte available for measurement, so it also affects the consistency of qualitative and quantitative results.
The heated inlet must provide conditions that allow the liquid sample to vaporize and mix with the carrier gas before transfer to the column. Inadequate temperature control can disrupt this transfer and contribute to altered peak shape, reduced sensitivity, or poorer reproducibility. Maintaining suitable conditions therefore helps preserve the relationship between the introduced sample and the measured chromatographic response.
These factors protect the controlled path between the syringe, inlet, and column. A compromised septum or leak can cause sample loss, while contamination can introduce unwanted material into the analysis. Clean components and leak-free connections help ensure that the material reaching the separation system represents the injected sample, supporting consistent peak shape, reproducibility, and accuracy.
A syringe first passes through the septum and delivers the liquid sample into the heated inlet. The sample then vaporizes and mixes with the carrier gas, after which the selected split or splitless condition controls its transfer into the column. Checking temperature, cleanliness, and connection integrity supports reliable sample movement throughout this sequence.
Injection port performance affects more than sample entry because it shapes the quality of the signal produced after separation. Variations in vaporization, transfer, contamination, or the fraction sent to the column can change peak shape and sensitivity. Consequently, an apparently unusual result may reflect sample introduction conditions as well as the chemical composition of the sample.
In chemistry, the injection port links physical sample handling with instrumental measurement. Reliable transfer helps preserve the sample composition presented to the column, supporting identification through chromatographic behavior and measurement of chemical amounts. Because injection conditions influence sensitivity, peak shape, and reproducibility, the port is an important control point for both qualitative and quantitative gas-chromatographic analysis.