Name: An Optimized O9-1/Hydrogel System for Studying Mechanical Signals in Neural Crest Cells (Video) | JoVE Journal
Uploaded: 2021-08-13T13:00:00.000+00:00
Duration: 11 min 2 s
Description: Learn to study mechanical signaling in neural crest cells using an optimized O9-1/hydrogel system with polyacrylamide gels of varying stiffness. This method reveals interactions between mechanical and chemical signals in development.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

We thank Dr. Ana-Maria Zaske, operator of Atomic Force Microscope-UT Core facility at the University of Texas Health Sciences Center, for the contributed expertise in AFM in this project. We also thank the funding sources from the National Institutes of Health (K01DE026561, R03DE025873, R01DE029014, R56HL142704, and R01HL142704 to J. Wang).

1. Hydrogel preparation
NOTE: All steps must be performed in a cell culture hood that has been disinfected with ethanol and ultraviolet (UV)-sterilized before use to maintain sterility. Tools, such as tweezers and pipettes, must be sprayed with ethanol. Buffer solutions must also be sterile-filtered.
<ol>
	<li>Preparation of aminosilane-coated glass coverslips
	<ol>
		<li>Place the desired number of glass coverslips onto a piece of laboratory wipe. 
		NOTE: Prepare an additional 3-4 coverslips to ensure sufficient backup supplies as they break easily. Different materials of glass coverslips will yield different compatibility of cell seeding and attachment. It is better to determine which type suits the experiment best before starting the experiments (see the Table of Materials).</li>
		<li>Use an alcohol burner or Bunsen burner to sterilize each coverslip by passing it back and forth through the flame (30 s for protein assay experiments). Place each glass coverslip on a laboratory wipe to cool down.</li>
		<li>Once the glass coverslips are cooled down, transfer them onto a Petri dish lined with parafilm to prevent slippage. 
		NOTE: If the coverslips are not cool enough, the residual heat will melt the parafilm onto the slips, rendering them unusable.</li>
		<li>Cover the coverslips with approximately 200 &#956;L and 800 &#956;L of 0.1 M NaOH for a 12 mm and a 25 mm coverslip, respectively, and let them sit for 5 min. Then, aspirate the 0.1 M NaOH and allow the coverslips to air-dry for another 5 min to form an even film.</li>
		<li>Once the coverslips are dried, pipette approximately 80 &#956;L and 150 &#956;L of 3-aminopropyl triethoxysilane (APTS) for 12 mm and 25 mm coverslips, respectively. Be careful to avoid spilling the solution onto the parafilm. Allow the solution to sit for 5 min.</li>
		<li>Aspirate as much excess APTS as possible and allow the residual APTS to dry for 5 min. Rinse the coverslips well by submerging them in sterile, deionized (DI) H2O three times for 5 min each time. 
		NOTE: If the glass coverslips are not rinsed well, the residual APTS causes unwanted reactions with glutaraldehyde, causing a white precipitate to form and resulting in unusable coverslips.</li>
		<li>Move the coverslips to a new Petri dish with the reactive side facing up. Add enough 0.5% glutaraldehyde to the Petri dish to cover the coverslips entirely and allow the coverslips to sit for 30 min.</li>
		<li>Aspirate the 0.5% glutaraldehyde and rinse the coverslips again in DI H2O one time for 3 min. Set the coverslips reactive side up on a laboratory wipe or a clean Petri dish to air-dry completely before using. 
		NOTE: The protocol can be paused here; coverslips must be placed in sterile DI H2O until use.</li>
	</ol>
	</li>
	<li>Preparation of siliconized coverslips
	<ol>
		<li>Place the same number of coverslips as the aminosilane-coated coverslips (step 1.1.1) in a Petri dish lined with parafilm.</li>
		<li>Pipette 40 &#956;L or 150 &#956;L for 12 mm and 25 mm coverslips, respectively, of dichloromethylsilane (DCMS) to one side of the coverslip and allow the solution to sit for 5 min.</li>
		<li>Aspirate any remaining solution from the coverslip, wash in sterile DI H2O once for 1 min, and place the reactive coverslips face up on a laboratory wipe to air-dry completely before moving onto the next step.</li>
	</ol>
	</li>
	<li>Preparing hydrogels
	<ol>
		<li>Mix acrylamide, bis-acrylamide, and DI H2O in a 1.5 mL centrifuge tube to prepare 500 &#956;L of solutions with varying stiffnesses (see Table 1). Vortex the solution for 30 s to mix it thoroughly.</li>
		<li>Working swiftly, add the 10% ammonium persulfate solution (APS) and tetramethylethylenediamine (TEMED) to the tube and vortex the solutions again to mix the solutions. 
		NOTE: Prepare fresh 10% APS and leave it on ice or freeze into single-use aliquots due to its sensitive freeze/thaw cycle.</li>
		<li>Pipette approximately 33 &#956;L or 100 &#956;L of the solution onto the dried 12 mm or 25 mm aminosilane-coated coverslips (section 1.1), respectively.</li>
		<li>Using curved tweezers, immediately place the DCMS-treated coverslip on top of the gel solution with the treated side touching the gel solution, thus sandwiching the gel solution between the DCMS-treated coverslip and aminosilane-coated coverslip.</li>
		<li>Allow the gel solution to polymerize for 5-15 min, while actively monitoring for gel polymerization of the leftover solution in the tube.</li>
		<li>Once the gel is polymerized, separate the DCMS-treated coverslip with curved tweezers or a razor blade, leaving the gel attached to the original aminosilane-coated coverslip.</li>
		<li>Immediately place the coverslip with the attached hydrogel in a predetermined 4-well/24-well and 6-well plate covered with 500 &#181;L and 2 mL of sterile PBS or DI H2O for 12 mm and 25 mm coverslips, respectively, to prevent the gel from drying out.</li>
		<li>Repeat steps 1.3.4-1.3.7 for all coverslips.</li>
		<li>Submerge the hydrogels in sterile PBS or DI H2O for 30 min to remove excess acrylamide solution. Store the hydrogels in sterile PBS or DI H2O at 4 &#176;C for a procedural stop here.</li>
		<li>In a dark room, prepare the sulfosuccinimidyl 6-(4&#39;-azido-2&#39;-nitrophenylamino) hexanoate (sulfo-SANPAH) mixture by mixing 2.5 mL of 50 mM 2-[4-(2-hydroxyethyl) piperazin-1-yl] ethanesulfonic acid(HEPES) (pH=8.5) with 25 &#956;L of the 50 &#956;g/mL sulfo-SANPAH in a conical tube, wrapped in aluminum foil to protect from light. Use a pipette to mix the solution well before using. 
		NOTE: A volume of 2.5 mL of sulfo-SANPAH solution is enough for approximately twenty-five 12 mm hydrogels or five 25 mm hydrogels.</li>
		<li>Aspirate PBS or DI H2O from the well plate. Add approximately 100 &#956;L or 500 &#956;L for 12 mm and 25 mm coverslips, respectively, of sulfo-SANPAH solution (step 1.3.10) to cover the gel. Ensure the solution covers the gel entirely. 
		NOTE: Adjust the vacuum suction strength to prevent the strong force from ripping or disturbing the hydrogels.</li>
		<li>Place the gels with the solution under a 15 W, 365 nm UV&#160;light for 10 min, uncovered to minimize any interference of the UV light reacting with the sulfo-SANPAH.</li>
		<li>Aspirate the excess sulfo-SANPAH by tilting the plate to collect as much of the solution as possible. Wash the gel with 50 mM HEPES two to three times.</li>
		<li>Add 500 &#956;L and 2 mL for 12 mm and 25 mm gels, respectively, of 50 mg/mL collagen I diluted in 0.2% acetic acid to each well containing the hydrogel. Allow the gels to incubate overnight in a 37 &#176;C, 5% CO2 incubator. 
		NOTE: Dilute collagen I in 0.2% acetic acid instead of 50 mM HEPES to promote homogenous distribution and attachment of collagen I.</li>
		<li>Aspirate the collagen I and wash the gels with sterile PBS three times to remove excess collagen I for 5 min each wash. Incubate the hydrogels in PBS with 10% horse serum, 5% FBS&#160;for 2 h in the 37 &#176;C, 5% CO2 incubator. 
		NOTE: The addition of 10% horse serum promotes higher proliferation compared to only using FBS as done in the previous publication.</li>
		<li>Aspirate the medium. Add 500 mL of sterile-filtered Dulbecco&#39;s Modified Eagle Medium (DMEM) with 10% FBS and 1% penicillin-streptomycin (P/S) to each well. Store the gels in the 37 &#176;C, 5% CO2 incubator until ready for cell culture.</li>
		<li>Once ready, plate approximately 1.5 &#215; 104 O9-1 cells/cm2 in basal medium in the culture dishes. Incubate the cells for 2 days in an incubator at 37 &#176;C, 5% CO2. Check the cells for confluency to ensure that the cells are sufficiently attached to gels, and that the number of cells is enough before collecting for analysis. 
		NOTE: See the previously published protocol for the steps of recovery, passage, and collection of O9-1 cells20.</li>
		<li>Proceed to sections 2, 3, or 4 for further analysis of the hydrogels.</li>
	</ol>
	</li>
</ol>
2. Quantitative analysis of stiffness via AFM
<ol>
	<li>Start the AFM system computer, followed by the AFM controller (see the Table of Materials).</li>
	<li>Mount the AFM cantilever on the AFM probe holder. Use a spherical cantilever with a 0.5 &#956;m silica bead mounted at the end of the cantilever (cantilever with spherical bead). 
	NOTE: For stiffer hydrogels, such as 10 kPa, 20 kPa, and 40 kPa, a stiffer probe was used with the spring constant of 0.24 N/m. A softer probe was used for softer hydrogels, such as 0.5 kPa and 1 kPa, with a spring constant of 0.059 N/m.</li>
	<li>Set the AFM software under contact mode.</li>
	<li>Mount the silicon wafer onto the AFM sample stage to collect force curves by clicking on Engage for the cantilever to touch the silicon substrate, thus generating the force curves.</li>
	<li>Use the force curves above (2.4) for calibration, click on Calibrate in the controlling software to obtain an average spring constant of the cantilever under thermal tune condition, and save the calibrated values in the controlling software.</li>
	<li>Mount the samples by placing the coverslip with the attached hydrogel in a 60 mm Petri dish onto the AFM scanning stage. Add 3 mL of PBS into the dish before conducting measurements to prevent the gel from drying out.</li>
	<li>Set the AFM to work in contact mode (fluid) to start measurement. Engage the spherical bead to continuously touch and lift from the gel sample.</li>
	<li>Set the cantilever so that its deflection threshold remains at 10 nm. Keep the ramping size of the probe at 10 &#956;m. Then, record the force curves as in step 2.4.</li>
	<li>Acquire at least 20 force curves from at least 3 to 10 different spots across the surface of the hydrogel.</li>
	<li>Calculate the average Young&#39;s modulus of ~20 force curves for each spot with AFM imaging and analysis software. Use extend ramp force curves and a linearized model (spherical). Calculate the average of all spots for each sample to yield the final stiffness. 
	NOTE: Young&#39;s modulus and related data (i.e., standard deviations) are automatically saved as a spreadsheet.</li>
	<li>Repeat steps 2.6-2.10 for all samples.</li>
</ol>
3. Molecular analysis of stiffness via immunofluorescence staining
<ol>
	<li>Use tweezers to transport the coverslip to a new plate to minimize false signals from cells grown directly onto the plate. Wash the cells with 500 &#181;L of sterile PBS three times to remove dead cells and any remaining culture medium.</li>
	<li>Fix the cells using 500 &#181;L of 4% paraformaldehyde (PFA) for 10 min at room temperature, undisturbed. Then, rewash the cells three times using 500 &#181;L of PBS/well for 2 min each. 
	NOTE: Store at 4 &#176;C for a procedural stop.</li>
	<li>Treat the cells with 500 &#181;L of 0.1% Triton X-100 for 15 min at room temperature. Then, wash the cells three times with 500 &#181;L of PBS/well.</li>
	<li>Block the cells with 250 &#181;L of 10% donkey serum (diluted in PBS and 0.1% Tween 20) per well for 30 min at room temperature.</li>
	<li>Incubate the cells with 250 &#181;L of primary antibodies for 2 h at room temperature or overnight at 4 &#176;C. Then, wash the cells three times with 500 &#181;L of PBS/well for 5 min each. 
	NOTE: Anti-Vinculin (Vcl) (1:250) and anti-AP2 alpha (1:250) were used in this experiment and were diluted in 10% donkey serum.</li>
	<li>Incubate the cells with corresponding secondary antibodies and/or phalloidin used for F-actin staining at a dilution of 1:400 in 250 &#181;L of 10% donkey serum for 30 min at room temperature. Then, wash the cells three times with PBS for 5 min each. 
	NOTE: 568 nm Phalloidin can be co-incubated with 488 nm or 647 nm secondary antibodies or on its own.</li>
	<li>Incubate the cells with 4&#8242;,6-diamidino-2-phenylindole (DAPI, 1:1000 dilution) in 250 &#181;L of PBS for 10 min followed by one last wash of PBS for 2 min.</li>
	<li>Add 3-4 drops of mounting medium to each well. Store the samples at 4 &#176;C to set for at least 2 h before imaging to ensure the mounting medium has set properly.</li>
	<li>Capture images of at least 3 random frames per hydrogel sample with a fluorescence microscope, producing individual and merged channels.</li>
</ol>
4. Quantitative real-time PCR (RT-qPCR)
<ol>
	<li>Transfer the hydrogels with the adherent cells for RNA collection to a new plate to minimize unwanted RNA from cells attached to the cell plate. Wash the cells with PBS three times to remove dead cells and culture medium.</li>
	<li>Extract the total mRNA using an RNA extraction kit. Perform reverse-transcription of RNA to cDNA using a reverse transcription supermix following the manufacturer&#39;s instructions.</li>
	<li>Perform RT-qPCR with primers for Vcl as the stiffness marker of choice and analyze using the 2-&#916;&#916;CT method. 
	NOTE: Primer sequence of Vcl: Forward 5&#39; GCTTCAGTCAGACCCATACTCG 3&#39;; reverse 5&#39; AGGTAAGCAGTAGGTCAGATGT 3&#39;.</li>
</ol>

The authors have no conflicts of interest to disclose.

The goal of the current study is&#160;to provide an effective and efficient in vitro system to better understand the impact of mechanical signals in NCCs. In addition to following the step-by-step protocol mentioned above, researchers need to keep in mind that the cell culture of O9-1 NCCs is affected by the type of glass coverslips used to prepare hydrogels. For instance, it was noted that cells seeded on a specific type of glass coverslip (see the Table of Materials) survived and proliferated ...

Neural crest cells (NCCs) are a group of stem cells during vertebrate embryogenesis with a remarkable ability to migrate and contribute to the development of various organs and tissues. NCCs can differentiate into different cell types, including sensory neurons, cartilage, bone, melanocytes, and smooth muscle cells, depending on the location of axial origin and the local environmental guidance of the NCC1,2. With the ability to differentiate into a wide array of cell types, genetic abnormalities that cause dysregulation at any stage of neural crest (NC) development can lead to numerous congenital diseases2. For instance, perturbations during the formation, migration, and development of NCCs lead to developmental disorders known collectively as neurocristopathies1,3. These diseases range from craniofacial defects due to failure in NCC formation, such as Treacher Collins syndrome, to the development of various cancers due to NCC metastatic migratory ability, as seen in melanoma3,4,5,6. Over the last few decades, researchers have made remarkable discoveries about the roles and mechanisms of NCCs in development and diseases, with the majority of findings being focused on chemical signals7,8. More recently, mechanical signals have been indicated to play a critical but poorly understood role in NCC development9,10.
The environmental cues of NCCs play a critical role during their development, including the regulation of NCC differentiation into various cell types. Environmental cues, e.g., physical cues, influence pivotal behaviors and cellular responses, such as functional diversification. Mechanotransduction allows cells to sense and respond to those cues to maintain various biological processes2. NCCs are surrounded by neighboring cells and different substrates, such as the extracellular matrix (ECM), which can give rise to mechanical stimuli to maintain homeostasis and adapt to the changes through fate determination, proliferation, and apoptosis11. Mechanotransduction begins at the plasma membrane where the sensory component of mechanical extracellular stimuli occurs, resulting in the intracellular regulation of the cell12. Integrins, focal adhesions, and junctions of the plasma membrane relay mechanical signals, such as shearing forces, stress, and the stiffness of surrounding substrates, into chemical signals to produce cellular responses12. The relaying of chemical signals from the plasma membrane to the final cellular regulation is carried out via different signaling pathways to finalize vital processes for the organism, such as differentiation.
Several studies have suggested that mechanical signaling from substrate stiffness plays a role in cell differentiation13,14. For instance, previous studies have shown that mesenchymal stem cells (MSCs) grown on soft substrates with a stiffness similar to that of brain tissue (in the range of 0.1-1.0 kPa) resulted in neuronal cell differentiation15,16. However, more MSCs differentiate into myocyte-like cells when grown on 8-17 kPa substrates mimicking the stiffness of muscle, while osteoblast-like differentiation was observed when MSCs were cultured on stiff substrates (25-40 kPa)15,16. The significance of mechanotransduction is highlighted by the irregularities and abnormalities in the mechanical signaling pathway that potentially lead to severe developmental defects and diseases, including cancer, cardiovascular diseases, and osteoporosis17,18,19. In cancers, normal breast tissue is soft, and the risk of breast cancer increases in stiff and dense breast tissue, an environment that is more akin to breast tumors15. With this knowledge, the effects of mechanical signaling on NCC development can be studied through simple manipulation of substrate stiffness through an in vitro system, providing further advantages and possibilities in understanding the fundamentals of NC-related disease progression and etiology.
To study the impact of mechanical signals in NCCs, we established an efficient in vitro system for NCCs based on the optimization of previously published methods and evaluation of the responses of NCCs to different mechanical signals20,21. A detailed protocol was provided for varying hydrogel stiffness preparation and evaluation of the impact of mechanical signaling in NCCs. To achieve this, O9-1 NCCs are utilized as the NC&#160;model to study the effects and changes in response to stiff versus soft hydrogels. O9-1 NCCs are a stable NC cell line isolated from mouse embryo (E) at day 8.5. O9-1 NCCs mimic NCCs in vivo because they can differentiate into various NC-derived cell types in defined differentiation media22. To study the mechanical signaling of NCCs, a matrix substrate was fabricated with tunable elasticity from varying concentrations of acrylamide and bis-acrylamide solutions to achieve the desired stiffness, correlating to the biological substrate stiffness20,21,23. To optimize the conditions of matrix substrate for NCCs, specifically O9-1 cells, modifications were made from the previously published protocol20. One change made in this protocol was to incubate hydrogels in collagen I, diluted in 0.2% acetic acid instead of 50 mM HEPES, at 37 &#176;C overnight. The low pH of acetic acid leads to a homogeneous distribution and higher collagen I incorporation, thus allowing for a more uniform attachment of the ECM protein24. In addition, a combination of horse serum and fetal bovine serum (FBS) was used at the concentrations of 10% and 5% in phosphate buffer saline (PBS), respectively, before storing the hydrogels in the incubator. Horse serum was used as an additional supplement to FBS due to its ability to promote cell proliferation and differentiation at the concentration of 10%25.
With this method, a biological environment was mimicked by the ECM protein coating (e.g., Collagen I) to create an accurate in vitro environment for NCCs to grow and survive20,21. The stiffness of the prepared hydrogels was quantitatively analyzed via atomic force microscopy (AFM), a well-known technique to depict the elastic modulus26. To study the effect of different stiffness levels on NCCs, wild-type O9-1 cells were cultured and prepared on hydrogels for immunofluorescence (IF) staining against filamentous actin (F-actin) to show the differences in cell adhesion and morphologies in response to changes in substrate stiffness. Utilizing this in vitro system, researchers will be able to study the roles of mechanical signaling in NCCs and its interaction with other chemical signals to gain a deeper understanding of the relationship between NCCs and mechanical signaling.

<table><tbody><tr><td>12 mm #1 Corning 0211 Glass Coverslip</td><td>Chemglass Life Sciences</td><td>CLS-1763-012</td><td></td></tr><tr><td>2% Bis-Acrylamide</td><td>Sigma Aldrich</td><td>M1533</td><td></td></tr><tr><td>24-well plate</td><td>Greiner Bio-one</td><td>662165</td><td></td></tr><tr><td>25 mm #1 Corning 0211 Glass Coverslip</td><td>Chemglass Life Sciences</td><td>CLS-1763-025</td><td></td></tr><tr><td>3-aminopropyl triethoxysilane (APTS)</td><td>Sigma Aldrich</td><td>A3648</td><td></td></tr><tr><td>4-well cell culture plate</td><td>Thermo Scientific</td><td>179830</td><td></td></tr><tr><td>4% Paraformaldehyde</td><td>Sigma Aldrich</td><td>J61899-AP</td><td></td></tr><tr><td>40% Acrylamide</td><td>Sigma Aldrich</td><td>A4058</td><td></td></tr><tr><td>50% glutaraldehyde</td><td>Sigma Aldrich</td><td>G7651</td><td></td></tr><tr><td>6-well cell culture plate</td><td>Greiner Bio-one</td><td>657160</td><td></td></tr><tr><td>AFM cantilever (spherical bead)</td><td>Novascan</td><td></td><td></td></tr><tr><td>AFM software</td><td>Catalyst NanoScope</td><td></td><td>Model: 8.15 SR3R1</td></tr><tr><td>Alexa Fluor 488 Phalloidin</td><td>Thermo Fisher</td><td>A12379</td><td></td></tr><tr><td>Ammonium Persulfate (APS)</td><td>Sigma Aldrich</td><td>248614</td><td>Powder</td></tr><tr><td>anti-AP-2&amp;alpha; Antibody</td><td>Santa Cruz</td><td>sc-12726</td><td></td></tr><tr><td>anti-Vinculin antibody</td><td>Abcam</td><td>ab129002</td><td></td></tr><tr><td>Atomic Force Microscopy (AFM) Bioscope Catalyst</td><td>Bruker Corporation</td><td></td><td></td></tr><tr><td>Collagen type I (100mg)</td><td>Corning</td><td>354236</td><td></td></tr><tr><td>DAPI (4&#039;,6-Diamidino-2-Phenylindole, Dihydrochloride)</td><td>Thermo Fisher</td><td>D1306</td><td></td></tr><tr><td>Dichloromethylsilane (DCMS)</td><td>Sigma Aldrich</td><td>440272</td><td></td></tr><tr><td>Donkey serum</td><td>Sigma Aldrich</td><td>D9663</td><td></td></tr><tr><td>Dulbecco&#039;s Modified Eagle Medium (DMEM)</td><td>Corning</td><td>10-017-CV</td><td></td></tr><tr><td>Fetal bovine serum (FBS)</td><td>Corning</td><td>35-010-CV</td><td></td></tr><tr><td>Fluorescence microscope</td><td>Leica</td><td></td><td>Model DMi8</td></tr><tr><td>Fluoromount-G mounting medium</td><td>SouthernBiotech</td><td>0100-35</td><td></td></tr><tr><td>HEPES</td><td>Sigma Aldrich</td><td>H3375</td><td>Powder</td></tr><tr><td>Horse serum</td><td>Corning</td><td>35-030-CI</td><td></td></tr><tr><td>iScript Reverse Transcription Supermix</td><td>Bio-Rad</td><td>1708841</td><td></td></tr><tr><td>Penicillin-Streptomycin antibiotic</td><td>Thermo Fisher</td><td>15140148</td><td></td></tr><tr><td>RNeasy micro kit</td><td>Qiagen</td><td>74004</td><td></td></tr><tr><td>Sterile 1x PBS</td><td>Hyclone</td><td>SH30256.02</td><td></td></tr><tr><td>Sterile deionized water</td><td>Hardy Diagnostics</td><td>U284</td><td></td></tr><tr><td>sulfo-SANPAH</td><td>Thermo Fisher</td><td>22589</td><td></td></tr><tr><td>SYBR green</td><td>Applied Biosystems</td><td>4472908</td><td></td></tr><tr><td>TEMED</td><td>Sigma Aldrich</td><td>T9281</td><td></td></tr><tr><td>Triton X-100</td><td>Sigma Aldrich</td><td>X100</td><td></td></tr><tr><td>Tween 20</td><td>Sigma Aldrich</td><td>P9416</td><td></td></tr></tbody></table>

an optimized o9-1/hydrogel system for studying mechanical signals in neural crest cells

An Optimized O9-1/Hydrogel System for Studying Mechanical Signals in Neural Crest Cells

Neural crest cells (NCCs) are vertebrate embryonic multipotent cells that can migrate and differentiate into a wide array of cell types that give rise to various organs and tissues. Tissue stiffness produces mechanical force, a physical cue that plays a critical role in NCC differentiation; however, the mechanism remains unclear. The method described here provides detailed information for the optimized generation of polyacrylamide hydrogels of varying stiffness, the accurate measurement of such stiffness, and the evaluation of the impact of mechanical signals in O9-1 cells, a NCC line that mimics in vivo NCCs.
Hydrogel stiffness was measured using atomic force microscopy (AFM) and indicated different stiffness levels accordingly. O9-1 NCCs cultured on hydrogels of varying stiffness showed different cell morphology and gene expression of stress fibers, which indicated varying biological effects caused by mechanical signal changes. Moreover, this established that varying the hydrogel stiffness resulted in an efficient in vitro system to manipulate mechanical signaling by altering gel stiffness and analyzing the molecular and genetic regulation in NCCs. O9-1 NCCs can differentiate into a wide range of cell types under the influence of the corresponding differentiation media, and it is convenient to manipulate chemical signals in vitro. Therefore, this in vitro system is a powerful tool to study the role of mechanical signaling in NCCs and its interaction with chemical signals, which will help researchers better understand the molecular and genetic mechanisms of neural crest development and diseases.

Hydrogel preparation and stiffness assessment through AFM and the Hertz model 
Here, a detailed protocol is provided to generate polyacrylamide hydrogels of varying stiffness by regulating the ratio of acrylamide and bis-acrylamide. However, the polyacrylamide hydrogels are not ready for the adhesion of cells due to the lack of ECM proteins. Thus, sulfo-SANPAH, acting as a linker, covalently binds to the hydrogels and reacts with the primary amines of ECM proteins to allow the adhesion of ECM proteins...

Detailed step-by-step protocols are described here for studying mechanical signals in vitro using multipotent O9-1 neural crest cells and polyacrylamide hydrogels of varying stiffness.

Neural crest cells (NCCs) are vertebrate embryonic multipotent cells that can migrate and differentiate into a wide array of cell types that give rise to ...

an-optimized-o9-1hydrogel-system-for-studying-mechanical-signals

Research

JoVE Journal

Developmental Biology

We demonstrate that the over expression of epidermal growth factor receptors (EGFR) enhances the motility of neural stem cells(NSCs) using a novel agarose gel based microfluidic device. This technology can be readily adaptable to other mammalian cell systems where cell sources are scarce, such as human neural stem cells, and the turn around time is critical.

Assessing Neural Stem Cell Motility Using an Agarose Gel-based Microfluidic Device

In this video, we describe the procedure to perform fluorescence staining using fluorescence microscopy to demonstrate phalloidin staining of neural crest cells cultured on hydrogels of varying stiffness to visualize and analyze cytoskeletal organization.

Fluorescence Staining of Neural Crest Cells Cultured on Hydrogels of Varying Stiffness

We present a new polyacrylamide hydrogel, called hydroxy-PAAm, that allows a direct binding of ECM proteins with minimal cost or expertise. The combination of hydroxy-PAAm hydrogels with microcontact printing facilitates independent control of many cues of the natural cell microenvironment for studying cellular mechanostransduction.

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

We showcase the development of self-assembled, three-dimensional bundles of longitudinally aligned astrocytic somata and processes within a novel biomaterial encasement. These engineered "living scaffolds", exhibiting micron-scale diameter yet extending centimeters in length, may serve as test-beds to study neurodevelopmental mechanisms or facilitate neuroregeneration by directing neuronal migration and/or axonal pathfinding.

Three-dimensional Tissue Engineered Aligned Astrocyte Networks to Recapitulate Developmental Mechanisms and Facilitate Nervous System Regeneration

Herein, we present a protocol for the 3D culture of rat brain-derived glia cells, including astrocytes, microglia, and oligodendrocytes. We demonstrate primary cell culture, methacrylated hyaluronic acid (HAMA) hydrogel synthesis, HAMAphoto-polymerization and cell encapsulation, and sample processing for confocal and scanning electron microscopic imaging.

Improved 3D Hydrogel Cultures of Primary Glial Cells for In Vitro Modelling of Neuroinflammation

This protocol describes a physiologically relevant, pressurized fluid approach for rapid and reversible induction of varicosities in neurons.

A Microbiomechanical System for Studying Varicosity Formation and Recovery in Central Neuron Axons

O9-1 is a multipotent mouse neural crest cell line. Here we describe detailed step-by-step protocols for culturing O9-1 cells, differentiating O9-1 cells into specific cell types, and genetically manipulating O9-1 cells by using siRNA-mediated knockdown or CRISPR-Cas9 genome editing.

Culturing and Manipulation of O9-1 Neural Crest Cells

Here, we provide a method for analyzing the behavior of growing axons in 3D matrices, mimicking their natural development.

Generation of 3-D Collagen-based Hydrogels to Analyze Axonal Growth and Behavior During Nervous System Development

This protocol describes the dissection and culture of cranial neural crest cells from mouse models, primarily for the study of cell migration. We describe the live imaging techniques used and the analysis of speed and cell shape changes.

Dissection, Culture and Analysis of Primary Cranial Neural Crest Cells from Mouse for the Study of Neural Crest Cell Delamination and Migration

This methodology aims to illustrate the mechanisms by which extracellular matrix cues such as substrate stiffness, protein composition and cell morphology regulate Schwann cell (SC) phenotype.

Preparation of Tunable Extracellular Matrix Microenvironments to Evaluate Schwann Cell Phenotype Specification

This protocol outlines an in vitro migration experiment suitable for the functional analysis of the molecules involved in the in vivo migration of neural crest cells into the hyaluronan-rich extracellular matrix.

In Vitro Investigation of the Effects of the Hyaluronan-Rich Extracellular Matrix on Neural Crest Cell Migration

Learn to study mechanical signaling in neural crest cells using an optimized O9-1/hydrogel system with polyacrylamide gels of varying stiffness. This method reveals interactions between mechanical and chemical signals in development.

An Optimized O9-1/Hydrogel System for Studying Mechanical Signals in Neural Crest Cells

Explore More Videos