Name: net work in a cyclic thermodynamic process
Uploaded: 2023-04-30T12:31:42.000Z
Duration: 1 min 19 s
Channel: JoVE

K12 Standards

Minnesota Academic Standards in Science

9-12

Physics

2.2.1 9P.2.2.1.1

Cyclic Processes And Isolated Systems

Un sistema que no intercambia calor y no trabaja en su entorno se denomina sistema aislado. El cambio en la energía interna para tales sistemas es cero.
En sistemas no aislados, la energía interna puede ser constante solo si el proceso seguido es cíclico.
Supongamos que un sistema termodinámico, como el aire dentro de los pulmones, a presión y volumen iniciales, expandido a un nuevo estado final, vuelve a su estado inicial en un proceso termodinámico. Este proceso se denomina proceso cíclico. 
En este proceso, la energía interna del gas permanece constante, por lo tanto, el trabajo realizado es igual a la transferencia neta de calor.
En un diagrama pV, este proceso cíclico se representa mediante una trayectoria cerrada. Supongamos que el trabajo realizado a lo largo de la primera ruta es W1 y el trabajo realizado a lo largo de la segunda ruta es W2. El trabajo neto realizado en un proceso cíclico está representado por el área entre estos dos caminos cerrados.
Es positivo si el proceso sigue un ciclo en el sentido de las agujas del reloj y es negativo cuando sigue un ciclo en el sentido contrario a las agujas del reloj.

<ol>
	<li>Young, H. D, y Freedman, R.A. (2012). Física Universitaria con Física Moderna. San Francisco, CA: Pearson. págs. 633.</li>
	<li>OpenStax. (2019). Física Universitaria Vol. 2. [Versión web]. pp 125 Recuperado de <a href="https://openstax.org/books/college-physics/pages/15-2-the-first-law-of-thermodynamics-and-some-simple-processes">https://openstax.org/books/college-physics/pages/15-2-the-first-law-of-thermodynamics-and-some-simple-processes</a></li>
</ol>

procesos cíclicos y sistemas aislados

Un sistema termodinámico sin intercambio de calor y trabajo es un sistema aislado. Para estos sistemas, la energía interna se mantiene constante. En el caso de un sistema no aislado, el cambio en la energía interna es cero solo si el proceso es cíclico. Se considera que un proceso termodinámico es cíclico si el sistema experimenta una serie de cambios y vuelve a su estado inicial. Consideremos un proceso cíclico que regresa a su estado inicial, sufriendo un proceso de cuatro pasos. La transferencia de calor a lo largo de cada camino es de 40 J, -80 J, -20 J y 100 J. ¿Cuál es el trabajo neto realizado para este proceso? Las magnitudes conocidas son la transferencia de calor para cada paso. La magnitud desconocida es la magnitud neta de trabajo realizado para este proceso cíclico. Según la primera ley de la termodinámica, el cambio en la energía interna del sistema es la diferencia entre la transferencia neta de calor hacia el sistema y el trabajo neto realizado por el sistema. Dado que el cambio en la energía interna es cero, la magnitud neta de trabajo realizado es igual a la transferencia neta de calor. La transferencia neta de calor es la suma de la transferencia de calor para cada camino, que es igual a 40 J. Por lo tanto, el trabajo neto realizado es de 40 J. El trabajo neto positivo realizado implica que el trabajo realizado por el sistema es mayor que el trabajo realizado sobre el sistema. La energía de calor suministrada al sistema es utilizada por el sistema para realizar trabajo externo.

Procesos Cíclicos y Sistemas Aislados

Un sistema termodinámico con cero intercambio de calor y trabajo es un sistema aislado. Para estos sistemas, la energía interna permanece constante.
En el caso de un ...

Education

Educación

JoVE Core

Física

Unit 1

Unidad 1

The First Law of Thermodynamics

La primera ley de la termodinámica

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

net work in a cyclic thermodynamic process

A cyclic thermodynamic process returns a system to its initial state. In a cycle, the change in internal energy is zero. An isolated system is different because it has zero heat exchange and zero work, so its internal energy stays constant.

For a non-isolated system, the internal energy change is zero only when the process is cyclic. The first law of thermodynamics relates internal energy, heat transfer, and work. It states that the change in internal energy is the difference between the net heat transferred into the system and the net work done by the system.

The example here uses a four-step cyclic process. The heat transfer along the four paths is 40 J, -80 J, -20 J, and 100 J. The question is to find the net work done for the full cycle. The net heat transfer is the sum of the heat for each step, which is 40 J.

Because the process is cyclic, the change in internal energy is zero. That means the net work done equals the net heat transfer. So the net work done is 40 J. This positive value means the system does more work than work done on it. The heat energy supplied to the system is used to do external work.

Net Work in a Cyclic Thermodynamic Process

net-work-in-a-cyclic-thermodynamic-process

thermodynamic systems

Open, Closed, and Isolated Systems

A thermodynamic system is the part of the world that scientists study for its heat and energy behavior. It sits inside a surrounding environment, or surroundings. The system and the surroundings can exchange heat and do work across the boundary that separates them. The immediate surroundings affect the system most strongly because they interact with it directly. A kettle of boiling tea shows how this works in everyday life. The tea and the kettle together form the system. If the lid is open,...

work done during volume change

Gas Work in a Piston Cylinder

Gas work in a piston cylinder describes how pressure and volume change are related in thermodynamics. In mechanics, work happens when a force moves an object. In thermodynamics, work done on a system can be estimated when the system changes volume during a process. A gas can be trapped in a cylinder with a movable piston at one end. When the gas expands from volume V1 to volume V2, it pushes on the piston and moves it by a small distance dr. If the pressure on the piston face is p and the...

path between thermodynamics states

Path Dependence in Gas Work

Work done by an ideal gas can depend on the path it takes between two thermodynamic states. The transcript compares two routes from state A to state C for the same gas. In both cases, the gas expands from volume V1 to volume V2, but the work is not the same. Along path AC, the gas stays at constant temperature T. It expands from V1 to V2. The work done by the gas is found from the pressure-volume relation for an ideal gas. After substituting pressure as nRT/V and integrating, the work for this...

heat and free expansion

Two Gas Paths to the Same Volume

Heat added to a thermodynamic system can lead to the same final state through different paths. The path matters because work and heat depend not only on the initial and final states, but also on the steps in between. In this topic, an ideal gas is used to show two different ways to reach the same volume. In the first case, the gas is in a cylinder with a piston and is heated at a constant temperature. As the gas molecules absorb energy, the gas expands slowly in a controlled isothermal process.

internal energy

How Internal Energy Changes in Gas Systems

Internal energy is the energy stored inside a thermodynamic system. It is the sum of the kinetic and potential energies of the molecules or other particles in the system. Molecular kinetic energy includes translational motion, rotation, and vibration. Molecular potential energy comes from interactions between molecules. A system’s location and overall motion do not affect its internal energy. For an ideal monatomic gas, each particle is a single atom. That means there is no rotational or...

first law of thermodynamics

Heat, Work, and Internal Energy

Heat, work, and internal energy are linked by the first law of thermodynamics. This law is a generalized form of energy conservation. It explains how energy changes when heat is added to or removed from a system, and when the system does work or has work done on it. The change in internal energy equals the heat transferred into the system minus the work done by the system. Added heat increases internal energy. For that reason, heat is taken as positive when it enters the system and negative...

first law of thermodynamics: problem-solving

first-law-of-thermodynamics-problem-solving

First Law of Thermodynamics: Solving Problems

The first law of thermodynamics links internal energy, heat, and work. It states that the change in internal energy of a system equals the net heat transfer into the system minus the net work done by the system. This is a general form of energy conservation, and it can be used for any thermodynamic process. To solve a first-law problem, start by identifying the thermodynamic system. Then list the initial and final states of the process. Next, identify the known and unknown quantities. It is...

cyclic processes and isolated systems

A cyclic thermodynamic process returns a system to its initial state. In a cycle, the change in internal energy is zero. An isolated system is different because it has zero heat exchange and zero work, so its internal energy stays constant. For a non-isolated system, the internal energy change is zero only when the process is cyclic. The first law of thermodynamics relates internal energy, heat transfer, and work. It states that the change in internal energy is the difference between the net...

isothermal processes

Isothermal Expansion and Heat Transfer

An isothermal process is a thermodynamic process that happens at constant temperature. During the process, heat slowly flows into the system or out of the system so thermal equilibrium is maintained. Phase changes are common examples of isothermal processes. Water can evaporate into steam at a constant temperature, and water can also freeze into ice at a constant temperature. An ideal gas can also undergo isothermal expansion or compression. Here, an ideal gas in an isolated cylinder expands...

isochoric and isobaric processes

Constant Volume and Pressure in Thermodynamics

Thermodynamic processes can happen at constant volume or at constant pressure. An isochoric process is a constant-volume process. In this case, the volume does not change, so the work done by the system is zero. The first law of thermodynamics still applies, so any heat added or removed changes the internal energy of the system only. A simple example is heating 1000 g of water from 40 degrees celsius to 70 degrees celsius at constant volume. Because the process is isochoric, no work is done by...

heat capacities of an ideal gas i

Ideal Gas Heat Capacity at Constant Pressure

Heat capacity describes how much heat a substance absorbs for a given change in temperature. It is also called thermal capacity, and its SI unit is J/K. Specific heat capacity is the heat needed to raise the temperature of 1 kg of a substance by 1 K, and its SI unit is J/kg·K. The video also explains molar heat capacity. This is the amount of heat added or removed to change the temperature of 1 mole of a substance by 1 K. It can be measured at constant volume or constant pressure, and it is...

heat capacities of an ideal gas ii

Ideal Gas Heat Capacity Differences

Ideal gas heat capacities depend on whether the gas is heated at constant volume or constant pressure. At constant volume, the heat absorbed only raises the internal energy of the system. No work is done in this case. At constant pressure, the situation is different. The heat absorbed increases the internal energy and also does work. Molar heat capacity is the heat needed to raise the temperature of 1 mole of gas by 1 unit. Because some of the added heat goes into work, more heat is needed at...

heat capacities of an ideal gas iii

Ideal Gas Heat Capacity and Degrees of Freedom

Ideal gas heat capacity depends on degrees of freedom, which are the independent ways a gas molecule can move, rotate, and vibrate. If d is the number of degrees of freedom, the molar heat capacity at constant volume can be written in terms of d. The molar heat capacity at constant pressure can also be written using the relationship between the two heat capacities. The ratio of molar heat capacity at constant pressure to molar heat capacity at constant volume is called the ratio of heat...

adiabatic processes for an ideal gas

Gas Temperature Changes in Adiabatic Processes

Adiabatic processes change the temperature of an ideal gas without heat transfer. In an adiabatic compression, no heat is added, but work is done on the gas. That work raises the gas temperature. In an adiabatic expansion, the gas does work and its temperature drops. A common example is the compression of a gas-air mixture inside a car engine cylinder. The compression happens so quickly that there is no time for heat to move between the mixture and its surroundings. Even so, the work done on...

pressure and volume in an adiabatic process

pressure-and-volume-in-an-adiabatic-process

Free Expansion: Pressure, Volume, and Temperature

Free expansion shows how pressure, volume, and temperature behave when a gas expands without doing work. It is an adiabatic process, but it is not the same as adiabatic expansion. In free expansion, no work is done and the internal energy does not change. In adiabatic expansion, work is done and the internal energy changes. For an adiabatic process, the pressure-volume relation comes from the adiabatic condition. That relation does not apply to free expansion, even though the expansion is...

work done in an adiabatic process

Adiabatic Compression in an Engine Cylinder

Adiabatic compression in an engine cylinder changes the pressure, temperature, and volume of a gas-air mixture. In this setup, gasoline vapor is injected into the cylinder when the piston is in its expanded position. The mixture starts at 20 °C, 1.00 x 10^5 N/m^2, and 240 cm^3. The mixture is then compressed adiabatically to 40 cm^3. Adiabatic means no heat is exchanged with the surroundings during the process. For this calculation, the compression is treated as quasi-static, even though real...

thermodynamic potentials

Energy Forms in Thermodynamics

Thermodynamic potentials are energy-based state functions used to analyze a thermodynamic system. They help describe how a system changes under different conditions. The four main thermodynamic potentials are internal energy, enthalpy, Helmholtz free energy, and Gibbs free energy. These potentials can be written using two of the variables pressure, volume, temperature, and entropy. In each case, the rate of change of the potential with respect to the other two variables gives useful...

maxwell's thermodynamic relations

Using Maxwell's Relations in Thermodynamics

Maxwell's thermodynamic relations help solve problems in thermodynamics. They connect partial differentials for quantities that are hard to measure in the lab with quantities that are easier to measure. This makes them useful for working with temperature, pressure, volume, and entropy. These relations come from thermodynamic potentials and the symmetry of second derivatives. Thermodynamic potentials are exact differentials, so the order of second differentiation does not change the result.

joule-thomson effect

Gas Cooling and Heating in Throttling

Gas cooling and heating in throttling is explained by the Joule-Thomson effect, also called the Joule-Kelvin effect. It describes how a fluid changes temperature when it passes through a valve or porous plug in a thermally insulated system. This type of flow is called a throttling process. In the experiment, a high-pressure gas is forced through a throttle valve or porous plug into a lower-pressure region. The gas expands as it moves into the larger volume. Work is done on the gas as it is...

key terms and concepts

Learn how the first law of thermodynamics applies to a cyclic process and how to find net work from heat transfer when internal energy stays constant.

Net Work in a Cyclic Thermodynamic Process | JoVE K12

physics

JoVE Core Física presenta la teoría y la aplicación de conceptos físicos fundamentales, como la cinemática, dinámica, mecánica de fluidos, estática, ondas y acústica, mediante animaciones audiovisuales concisas y fáciles de entender. Además, los vídeos de científicos en acción muestran la aplicación de los conceptos relacionados en experimentos de investigación clásicos y originales, realizados en laboratorios de todo el mundo.

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

High School

Physical Science

Energy

HS-PS3-1

Arizona Science Standards

HS.P4

HS.P4U1.8

Florida Department of Education

SC.912.P.10

SC.912.P.10.2

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-3.

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

First Law Of Thermodynamics: Problem-Solving

The first law of thermodynamics states that the change in internal energy of the system is equal to the net heat transfer into the system minus the net ...

A thermodynamic system with zero heat exchange and work is an isolated system. For these systems, the internal energy remains constant.
In the case of a ...

Work Done on a System by External Force

The work done by an external force on a particle changes its kinetic energy. However, internal forces must also be considered for a system of interacting ...

/files/media/science-education/science-education-thumbs/14751.jpg

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Types of Kinetic Energy

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

Kinetic Energy - I

It&#8217;s plausible to suppose that the greater the velocity of a body, the greater effect it could have on other bodies. This does not depend on the ...

Kinetic Energy - II

The kinetic energy of a particle is one-half of the product of the particle&#8217;s mass and the square of its speed. Note that just as Newton&#8217;s ...

Gravitational Potential Energy

Potential energy is not just a property of each object, but also a property of the interactions between objects in a chosen system. For each type of ...

Elastic Potential Energy

Elastic potential energy is the energy stored as a result of the deformation of an elastic object, such as the stretching of a spring. An object is ...

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Motion and Stability: Forces and Interactions: Apply mathematical representations to support the claim that the total momentum of a system of objects is conserved when there is no net force on the system. (P: 5, CC: 4, CI: PS2)

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Motion and Stability: Forces and Interactions: Evaluate questions about the advantages and disadvantages of using digital transmission and storage of information.* ** (P: 1, CC: 7, CI: PS4, ETS1)

9P.1.1.1.1

Impulse

According to Newton&#8217;s second law of motion, the rate of change of the momentum of an object is the net external force acting on it. The total change ...

Impulse-Momentum Theorem

The total change in the motion of an object is proportional to the total force vector acting on it and the time over which it acts. This product is called ...

Conservation of Momentum: Introduction

The total momentum of a system consisting of N interacting objects is constant in time or is conserved. A system must meet two requirements for its ...

Conservation of Momentum: Problem Solving

Solving problems using the conservation of momentum requires four basic steps:

	Identify a closed system, where the total mass is constant, and no net ...

Types Of Collisions - I

When two objects come in direct contact with each other, it is called a collision. During a collision, two or more objects exert forces on each other in a ...

Types of Collisions - II

When two or more objects collide with each other, they can stick together to form one single composite object (after collision). The total mass of the ...

Elastic Collisions: Introduction

An elastic collision is one that conserves both internal kinetic energy and momentum. Internal kinetic energy is the sum of the kinetic energies of the ...

Elastic Collisions: Case Study

Elastic collision of a system demands conservation of both momentum and kinetic energy. To solve problems involving one-dimensional elastic collisions ...

collisions-in-multiple-dimensions-introduction

Collisions in Multiple Dimensions: Introduction

It is far more common for collisions to occur in two dimensions; that is, the initial velocity vectors are neither parallel nor antiparallel to each ...

collisions-in-multiple-dimensions-problem-solving

Collisions in Multiple Dimensions: Problem Solving

In multiple dimensions, the conservation of momentum applies in each direction independently. Hence, to solve collisions in multiple dimensions, we should ...

Motion and Stability: Forces and Interactions: Plan and conduct an investigation to provide evidence that an electric current can produce a magnetic field and that a changing magnetic field can produce an electric current. (P: 3, CC: 2, CI: PS2)

9P.1.2.1.1

Gravitation

In the years before Newton, a general belief prevailed that different laws governed objects in the sky than objects on Earth. When Kepler wrote down the ...

/files/media/science-education/science-education-thumbs/14716.jpg

Newton's Law of Gravitation

Our everyday observation tells us that all objects close to the Earth naturally tend to fall to the ground. Early philosophers assumed that this downward ...

gravitation-between-spherically-symmetric-masses

Gravitation Between Spherically Symmetric Masses

The gravitational potential energy between two spherically symmetric bodies can be calculated from the masses and the distance between the bodies, ...

/files/media/science-education/science-education-thumbs/14717.jpg

Gravity between Spherical Bodies

Newton&#39;s law of gravitation describes the gravitational force between any two point masses. However, for extended spherical objects like the Earth, ...

Coulomb's Law

Experiments with electric charges have shown that if two objects each have an electric charge, they exert an electric force on each other. The magnitude ...

coulomb-s-law-and-the-principle-of-superposition

Coulomb's Law and The Principle of Superposition

Coulomb&#39;s Law describes the force experienced by two point charges under each other&#39;s presence. But what if there are more than two charges? For ...

comparison-between-electrical-and-gravitational-forces

Comparison Between Electrical And Gravitational Forces

There are four fundamental forces in nature: the gravitational force, the electromagnetic force, the strong nuclear force, and the weak nuclear force. To ...

Motion and Stability: Forces and Interactions: Plan and conduct an investigation to provide evidence that the transfer of thermal energy when two components of different temperatures are combined within a closed system results in a more uniform energy distribution among the components in the system. (P: 3, CC: 3, CI: PS3)

9P.1.2.1.2

Work-energy Theorem

According to Newton&#x2019;s second law of motion, the sum of all the forces acting on a particle (net force) determines the rate of change in the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

Thermodynamic Systems

A thermodynamic system is a set of objects whose thermodynamic properties are of interest. The system is considered to be embedded in its surroundings or ...

First Law of Thermodynamics

A change in the internal energy of a system depends on the the net heat transfer into the system and the net work done by the system. The first law of ...

Energy: Analyze data to support the claim that Newton’s second law of motion describes the mathematical relationship among the net force on a macroscopic object, its mass, and its acceleration. (P: 4, CC: 2, CI: PS2)

9P.2.1.1.1

2 Looking at data and empirical evidence to understand phenomena or solve problems
 2.2 Using mathematics and computational thinking
  2.2.1 Students will be able to use mathematics to represent physical variables and their relationships, compare mathematical expressions to the real world, and engage in computational thinking as they use or develop algorithms to describe the natural or designed worlds.

Net Work in a Cyclic Thermodynamic Process

Description

Transcript

Tags

More videos by Standards