Name: scale readings in motion and water
Uploaded: 2023-05-16T08:18:40.000Z
Duration: 1 min 9 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physics

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.Phy.2.2

Apparent Weight

Considere un ascensor en reposo, con una caja en una báscula. La fuerza gravitacional sobre la caja es igual a la fuerza normal ejercida por la escala sobre la caja, de modo que la magnitud de la fuerza neta sobre la caja es cero. La báscula lee la magnitud de la fuerza normal, que es el peso real de la caja.
Si el ascensor se mueve hacia arriba con una aceleración constante, la magnitud neta de la fuerza sobre la caja es igual a la diferencia entre la fuerza normal y la fuerza gravitacional sobre ella. La báscula lee el peso aparente mayor que el peso real de la caja.
Cuando el ascensor acelera hacia abajo, convencionalmente, la aceleración se vuelve negativa. El peso aparente es ahora menor que el peso real de la caja.
Ahora, si el cable del ascensor se rompe, la caja con la báscula flotará momentáneamente pero eventualmente se acelerará hacia abajo debido a la gravedad, experimentando una caída libre.
La báscula dice cero y la caja parece ingrávida. Este fenómeno se denomina ingravidez aparente.

<ol>
	<li>Young, H.D y Freedman, R.A. (2012). Física Universitaria con Física Moderna. San Francisco, CA: Pearson. págs. 142.</li>
	<li>OpenStax. (2019). Física Universitaria Vol. 1. [Versión web].pp.272. Obtenido de <a href="https://openstax.org/books/university-physics-volume-1/pages/6-1-solving-problems-with-newtons-laws">https://openstax.org/books/university-physics-volume-1/pages/6-1-solving-problems-with-newtons-laws</a></li>
	<li>Giancoli, D.C. (2014). Principios de Física con Aplicaciones. San Francisco, CA: Pearson. págs. 124.</li>
</ol>

No se han declarado conflictos de interés.

peso aparente

El peso verdadero es la medida de la fuerza gravitacional que actúa sobre un objeto. Sin embargo, si el objeto acelera, su peso medido es diferente a su peso verdadero. Observaciones similares se pueden hacer cuando el objeto está sumergido en agua. El peso de un objeto en agua es su peso aparente, que es igual a la diferencia entre su peso verdadero y las fuerzas de flotación. Considera a una persona parada en una balanza en un elevador. Si la balanza es precisa cuando está en reposo, la lectura de la balanza es igual a la magnitud de la fuerza que la persona ejerce hacia abajo en ella. Las únicas fuerzas que actúan sobre la persona son su peso y la fuerza normal hacia arriba de la balanza. En reposo, la fuerza neta sobre la persona es cero. De acuerdo con la tercera ley de Newton, el peso y la fuerza normal son iguales en magnitud y opuestas en dirección, por lo que la fuerza normal es igual al peso verdadero de la persona. La balanza del baño lee la fuerza normal ejercida por la balanza sobre la persona. Si el elevador acelera hacia arriba con aceleración constante, el peso aparente es mayor que el peso verdadero, ya que la fuerza neta que actúa sobre él es mayor que cero. Sin embargo, si el elevador desacelera, el peso aparente es menor que el peso verdadero del objeto, porque la fuerza neta que actúa sobre el objeto es negativa. Si el elevador está en caída libre, la persona se siente sin peso gracias a ellos y el elevador están cayendo bajo la aceleración gravitacional. Este fenómeno se llama peso aparente. La "gravedad cero" experimentada por las personas en un satélite en órbita cercana a la Tierra es el mismo peso aparente experimentado en un elevador en caída libre. La fuerza de gravedad hace que el satélite "caiga" fuera de su trayectoria recta natural. Por lo tanto, aunque la fuerza de gravedad actúa sobre los objetos dentro del satélite, los objetos experimentan una gravedad cero porque ellos y el satélite están acelerando juntos como en caída libre.

Peso Aparente

El peso real es la medida de la fuerza gravitacional que actúa sobre un objeto. Sin embargo, si el objeto acelera, su peso medido es diferente de su peso ...

/files/media/science-education/science-education-thumbs/14695.jpg

Education

Educación

JoVE Core

Física

Unit 1

Unidad 1

Newton's Laws of Motion

Leyes del movimiento de Newton

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

scale readings in motion and water

Scale readings can change when an object is moving or submerged in water. The force we call true weight is the gravitational force acting on an object. When motion or fluid forces are present, the reading can differ from that true weight. In water, this changed reading is called apparent weight, and it equals true weight minus the buoyant force.

A bathroom scale in an elevator shows how this works. At rest, the scale reads the force the person pushes downward on it. The only forces on the person are weight and the upward normal force from the scale. Because the net force is zero, the normal force matches the person’s true weight.

If the elevator accelerates upward with constant acceleration, the apparent weight becomes greater than the true weight. The net force on the person is then greater than zero. If the elevator decelerates, the apparent weight becomes less than the true weight. In that case, the net force on the person is negative.

If the elevator is in free fall, the person feels weightless. This is called apparent weightlessness. The same effect happens for people in a satellite orbit close to Earth. Gravity still acts on the satellite and on the objects inside it. But both the satellite and the objects are falling together, so they experience apparent weightlessness just like a free-falling elevator.

Scale Readings in Motion and Water

force

Understanding Force in Motion

Force is a push or pull that acts on an object. It has both magnitude and direction, so force is a vector quantity. In everyday life, force appears when we open a door, walk down a street, lift a fork, or touch a baby's face. Forces also shape matter at the smallest scales. The atoms in our bodies are held together by electrical forces. The nucleus of an atom is held together by nuclear force, which is the strongest force known to us. The study of motion is called kinematics. Kinematics...

types of forces

Contact and Field Forces in Physics

Forces in physics are often grouped as contact forces and field forces. Contact forces happen when objects touch directly. Field forces act without direct physical contact. They come from a field, which is a region of space that can be detected by the force it exerts on a body. Scientists describe four fundamental force fields in nature: gravitational, electromagnetic, strong nuclear, and weak nuclear. The gravitational field gives a body its weight. The electromagnetic field includes static...

newton's first law: introduction

Newton's First Law and Inertia

Newton's first law of motion explains inertia and how forces change motion. Motion can be striking to observe, from a dolphin jumping from water to a bird in flight or a satellite moving in orbit. The study of motion is kinematics, which describes velocity and acceleration. Dynamics goes further by examining the forces that affect moving objects and systems. Newton's laws of motion are the foundation of dynamics. They are simple in form, but they describe a wide range of natural behavior.

newton's first law: application

Newton's First Law and Friction

Newton's first law explains why friction changes an object's motion. It says that an object at rest stays at rest, and an object in motion keeps moving unless a net external force acts on it. A net external force is the overall force from outside the object that causes a change in velocity, meaning a change in speed or direction. This idea gives a cause-and-effect reason for motion, rather than just describing what we see. Galileo first developed the idea behind the first law of motion, and...

internal and external forces

External Forces and Motion Changes

External forces and motion changes are linked in Newton’s first law. A net external force causes a change in motion. External forces act on an object or system from outside that object or system. Internal forces come from inside the system of interest. They act on one part of an object and are exerted by another part of the same object. These forces do not cause acceleration when the whole system is studied. When analyzing motion, the internal forces are ignored. Instead, only the external...

newton's second law

Force, Mass, and Acceleration

Newton's second law connects net force, mass, and acceleration. It explains how an object's motion changes when external forces act on it. The law gives a clear cause-and-effect link that can be used to make calculations. All external forces on a system are added together to find the net force, or F net. A larger net external force produces a larger acceleration. The acceleration points in the same direction as the net force. Mass also affects the result. A larger mass means more inertia, so...

mass and weight

Weight Changes, Mass Stays Constant

Mass and weight are related, but they are not the same. In physics, weight is the pull of the Earth on an object. It depends on how far the object is from the center of the Earth. Mass is the amount of matter in an object, and it does not change with location. Everyday language can make this difference confusing. Medical records often list body weight in kilograms, even though the correct force unit is the newton. That can make mass and weight seem interchangeable. In physics, however, they...

weightlessness

Weightlessness in Free Fall

Weightlessness happens when contact forces disappear, even though gravity is still present. In physics, an object in free fall has only gravity acting on it. If the net external force on the object is its weight, the object is accelerating toward the center of the Earth. Galileo showed that, without air resistance, all objects fall with the same acceleration g. On Earth, falling objects are never truly in free fall because air always pushes upward with some resistance force. That is why real...

apparent weight

Scale readings can change when an object is moving or submerged in water. The force we call true weight is the gravitational force acting on an object. When motion or fluid forces are present, the reading can differ from that true weight. In water, this changed reading is called apparent weight, and it equals true weight minus the buoyant force. A bathroom scale in an elevator shows how this works. At rest, the scale reads the force the person pushes downward on it. The only forces on the...

newton's third law: introduction

Newton's Third Law in Force Pairs

Newton's third law explains how force pairs work in motion and interactions. When one body exerts a force on a second body, the first body experiences a force that is equal in magnitude and opposite in direction. A simple example is a person pushing on a wall. The wall pushes back on the person with an equal and opposite force. This is why Newton's third law is often described as action and reaction, where the action is the force exerted and the reaction is the force experienced afterward. <br...

newton's third law: examples

Newton's Third Law in Motion

Newton's third law explains how forces come in pairs during motion. It says that every action has an equal and opposite reaction. In these examples, the two forces act on different systems, so they do not cancel each other out. A swimmer pushing off the side of a pool shows this clearly. The swimmer pushes against the wall with their feet and then accelerates in the opposite direction. The wall pushes back with an equal and opposite force. If the swimmer is the system of interest, the wall's...

drawing free-body diagrams: rules

Free-Body Diagrams for Newton’s Laws

Free-body diagrams help students map the forces acting on an object in physics. They are used often when studying and applying Newton’s laws of motion. A clear diagram makes it easier to analyze a system before solving for motion. Start by drawing the object under consideration. If the object is treated like a particle, show it as a point and place that point at the origin of an x-y coordinate system. Then add every force that acts on the object as a vector. Do not include the net force on the...

free body diagrams: examples

Free Body Diagram Force Examples

Free body diagrams show the external forces acting on an object or system. The object is drawn as a single isolated point, or free body, so the forces are easier to analyze. Only forces that come from outside the object or system are included. These forces are shown as vectors pointing away from the free body. A person sitting on a chair is a simple example. The free-body diagram has two forces. The chair exerts an upward normal force, and gravity pulls downward with the weight. A rocket sled...

inertial frames of reference

Newton's First Law and Reference Frames

Newton's first law helps identify inertial reference frames. An inertial reference frame is one in which Newton's first law holds true. In that frame, an object with no net force moves at constant velocity. A key idea is that any frame moving at constant velocity relative to an inertial frame is also inertial. For that reason, inertial frames can be found by comparing motion from one frame to another. The laws of physics do not give one inertial frame special status over another. In nature, a...

non-inertial frames of reference

Why Motion Seems Different in Accelerating Frames

A non-inertial frame of reference is a frame that accelerates, decelerates, or rotates relative to an inertial frame. In these frames, motion can look unusual because the observer is moving with the system. That is why an airplane taking off, a car turning a corner, a merry-go-round, and a tropical cyclone can all be examples of non-inertial motion. These situations can show inertial forces, which seem to appear because the frame itself is accelerating or rotating. The force does not come from...

centrifugal force

Rotating Frames and Pseudo Forces

Pseudo forces, also called fictitious forces, appear in a rotating frame of reference when compared with an inertial frame. They are not real forces. Instead, they are mathematical tools that help make Newton&amp;#39;s laws of motion easier to use in a non-inertial frame. Common examples include centrifugal, Coriolis, and Euler forces. These forces matter in mechanics, astrophysics, and fluid dynamics. In these areas, motion is often described from a frame that is not inertial. That is why...

/files/media/science-education/science-education-thumbs/14696.jpg

key terms and concepts

Learn how true weight, apparent weight, buoyant force, and elevator motion change scale readings, including free fall and apparent weightlessness.

Scale Readings in Motion and Water | JoVE K12

physics

JoVE Core Física presenta la teoría y la aplicación de conceptos físicos fundamentales, como la cinemática, dinámica, mecánica de fluidos, estática, ondas y acústica, mediante animaciones audiovisuales concisas y fáciles de entender. Además, los vídeos de científicos en acción muestran la aplicación de los conceptos relacionados en experimentos de investigación clásicos y originales, realizados en laboratorios de todo el mundo.

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Forces, Momentum And Motion

Gravitational force and fields

Tennessee Academic Standards

High School

Motion and Stability: Forces and Interactions

PHYS.PS2.12

Virginia  Standards of Learning

HIgh School

Physical Science

PS.8

PS.8.b

PH.3

PH.3.a

Alabama Course of Study Science

9-12.P.1.2

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Forces and Interactions

HS-PS2-1.

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Kinematic Equations - I

When an object moves with constant acceleration, the velocity of the object changes at a constant rate throughout the motion. The kinematic equations of ...

Kinematic Equations - II

The second kinematic equation expresses the final position of an object in terms of its initial position, the distance traveled with the initial constant ...

Kinematic Equations - III

The first two kinematic equations have time as a variable, but the third kinematic equation is independent of time. This equation expresses final velocity ...

Kinematic Equations: Problem Solving

When analyzing one-dimensional motion with constant acceleration, the problem-solving strategy involves identifying the known quantities and choosing the ...

Free-falling Bodies: Introduction

All objects, neglecting air resistance, fall with the same acceleration towards the Earth&#39;s center due to the force exerted by the Earth&#39;s ...

Free-falling Bodies: Example

An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the ...

velocity-and-position-by-graphical-method

Velocity and Position by Graphical Method

Velocity and position can be calculated from the known function of acceleration as a function of time. The total area under the acceleration-time graph ...

Velocity and Position by Integral Method

If acceleration as a function of time is known, then velocity and position functions can be derived using integral calculus. For constant acceleration, ...

Use models (graphs, equations, diagrams) to infer motion in one dimension.

PS.Phy.1.1

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Projectile Motion

An object thrown in the air follows a parabolic path under the influence of Earth&#39;s gravitational force. The motion of such an object is called ...

/files/media/science-education/science-education-thumbs/12634.jpg

Projectile Motion: Equations

Projectile motion is commonly observed in our day-to-day life. For example, a basketball thrown by a player, an arrow shot from a bow, and kids jumping ...

Projectile Motion: Example

The theory of projectile motion is very useful for players of several sports to improve their performance. For example, a javelin thrower needs to throw ...

principle-linear-impulse-momentum-for-single-particle-problem

Principle of Linear Impulse and Momentum for a Single Particle: Problem Solving

Consider a massless pulley system consisting of a wooden box and a cylinder of known masses. Determine the speed of the attached objects at a specific ...

Non-uniform Circular Motion

In&#160;uniform circular motion, the particle executing circular motion has a constant speed, and the circle is at a fixed radius. However, not all ...

Relative Velocity in One Dimension

The understanding of the concept of reference frames is essential to discuss relative motion in one or more dimensions. When we say that an object has a ...

Relative Velocity in Two Dimensions

Relative velocity is the velocity of an object as observed from a particular reference frame, or the velocity of one reference frame with respect to ...

Use models (graphs, equations, diagrams) to infer motion in two dimensions.

PS.Phy.1.2

Force

Forces affect every moment of our life. Our bodies are held to the Earth by force, and they are held together by the forces of charged particles. When we ...

Types of Forces

In most situations, forces can be grouped into two categories: contact forces and field forces.&#160; Contact forces occur as a result of direct physical ...

Drawing Free-body Diagrams: Rules

The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram. Free-body diagrams are useful in ...

Free Body Diagrams: Examples

Solving problems that involve forces is easy using free-body diagrams. A free-body diagram is a sketch showing all the external forces that are acting on ...

Use free body models to qualitatively and quantitatively analyze systems of forces in one dimension and two dimensions.

PS.Phy.2.1

Newton's First Law: Introduction

Motion draws our attention. Motion itself can be beautiful, causing us to marvel at the forces needed to create spectacular sights, such as that of a ...

Newton's First Law: Application

Experience suggests that an object at rest remains at rest if left alone, and that an object in motion tends to slow down and stop unless some effort is ...

Internal and External Forces

Newton&#39;s first law states that a net external force causes a change in motion. External forces act on an object or system, originating outside of the ...

Newton's Second Law

Newton&#39;s second law is closely related to his first law of motion. It mathematically gives the cause-and-effect relationship between force and changes ...

Mass and Weight

Mass and weight are often used interchangeably in everyday conversation. For example,&#160; medical records often show our weight in kilograms, but never ...

Weightlessness

When an object is dropped, it accelerates toward the center of the Earth. If the net external force on the object is its weight, it is said to be in free ...

True weight is the measure of the gravitational force acting on an object. However, if the object accelerates, its measured weight is different from its ...

Newton's Third Law: Introduction

Whenever one body exerts a force on a second body, the first body experiences a force equal in magnitude and opposite in direction, to the force that it ...

Newton's Third Law: Examples

Newton&#39;s third law states that every action has an equal and opposite reaction. Consider a swimmer pushing off the side of a pool. They push against ...

first-law-particles-in-one-dimensional-equilibrium

First Law: Particles in One-dimensional Equilibrium

Newton&#39;s first law of motion states that a body at rest remains at rest, or if in motion, remains in motion at constant velocity, unless acted on by a ...

first-law-particles-in-two-dimensional-equilibrium

First Law: Particles in Two-dimensional Equilibrium

Recall that a particle in equilibrium is one for which the external forces are balanced. Static equilibrium involves objects at rest, and dynamic ...

Second Law: Motion under Same Force

Newton&#39;s laws can be applied to bodies at rest and bodies in motion. Newton&#39;s first law is applied to bodies in equilibrium, whereas the second ...

second-law-motion-under-same-acceleration

Second Law: Motion under Same Acceleration

Newton&#39;s second law of motion applies to bodies moving under the same acceleration. For example, when a baggage tractor pulls luggage carts, each cart ...

Drag Force and Terminal Speed

An interesting force in everyday life is the force of drag on an object when it is moving in a fluid. Like friction, the drag force always opposes the ...

/files/media/science-education/science-education-thumbs/14697.jpg

Carry out investigations to explain the interactions of forces on an object according to Newton's Laws of Motion.

Analyze the motion of objects using time, distance, displacement, speed, velocity, and acceleration.

Scale Readings in Motion and Water

Description

Transcript

Tags

More videos by Standards