Name: gauge vs absolute pressure
Uploaded: 2023-05-16T08:18:40.000Z
Duration: 1 min 20 s
Channel: JoVE

K12 Standards

Alabama Course of Study Science

9-12

Earth and Space Science

Earth's Systems

9-12.ESS.2.7.d

Pressure Gauges

Cuando una pelota de fútbol se está desinflando, el gas escapa hasta que la presión interna es igual a la presión atmosférica. En este punto, el manómetro marca cero.
La mayoría de los manómetros están calibrados para medir el cero a la presión atmosférica, y la presión medida se denomina presión manométrica.
La presión absoluta es la presión total, incluida la presión manométrica y la presión atmosférica.
Hay dos clases importantes de manómetros: el manómetro, que mide la presión manométrica, y el barómetro, que mide la presión atmosférica.
Un manómetro es un tubo de vidrio en forma de U que contiene agua o mercurio. Un extremo del tubo está expuesto a la presión atmosférica y el otro está conectado a un recipiente de presión desconocida.
Se compara la presión en la parte inferior de ambos extremos y se estima la presión manométrica.
Un barómetro de mercurio consiste en un solo tubo largo, cerrado en un extremo. El tubo se llena de mercurio y se invierte sobre un plato de mercurio.
El nivel de mercurio en el tubo sube y baja, dependiendo de la presión fuera del tubo. A partir del nivel de mercurio, se estima la presión atmosférica.

<ol>
	<li>OpenStax. (2019). Física Universitaria Vol. 1. [Versión web]. Sección 14.2: Medición de la presión, págs. 697 a 700. Obtenido de <a href="https://openstax.org/books/university-physics-volume-1/pages/14-2-measuring-pressure">https://openstax.org/books/university-physics-volume-1/pages/14-2-measuring-pressure</a></li>
</ol>

manómetros de presión

La mayoría de los manómetros de presión, como los de los tanques de buceo, están calibrados para leer cero a presión atmosférica. Las lecturas de dichos manómetros se llaman presión medida, que es la presión relativa a la presión atmosférica. Cuando la presión dentro del tanque excede la presión atmosférica, el manómetro indica un valor positivo. Algunos manómetros están diseñados para medir presión negativa. Por ejemplo, muchos experimentos de física deben llevarse a cabo en una cámara de vacío, una cámara rígida de la cual se extrae parte del aire. La presión dentro de la cámara de vacío es más baja que la presión atmosférica ambiente, por lo que el manómetro en la cámara indica un valor negativo. La presión absoluta es la suma de la presión medida y la presión atmosférica. La presión absoluta en los fluidos no puede ser negativa. Hay varios dispositivos que se utilizan para medir la presión, que van desde medidores de neumáticos hasta monitores de presión arterial. Muchos otros tipos de manómetros de presión, como los manómetros y barómetros, se utilizan comúnmente para probar la presión de los fluidos. Otros tipos de manómetros de presión incluyen manómetros de deformación, manómetros de capacitancia, manómetros piezoeléctricos y manómetros de iones, que miden la presión mediante la ionización de moléculas en cámaras altamente evacuadas. Los diferentes manómetros de presión son útiles en diferentes rangos de presión y en diferentes situaciones físicas.

Manómetros de presión

La mayoría de los manómetros, como los de los tanques de buceo, están calibrados para leer cero a presión atmosférica. Las lecturas de dichos medidores se denominan ...

/files/media/science-education/science-education-thumbs/14712.jpg

Education

Educación

JoVE Core

Physics

Física

Unit 1

Unidad 1

Fluid Mechanics

Mecánica de fluidos

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

gauge vs absolute pressure

Pressure gauges often show pressure relative to atmospheric pressure. Many gauges, including those on scuba tanks, are set to read zero at atmospheric pressure. That reading is called gauge pressure. When the pressure inside the tank is higher than atmospheric pressure, the gauge shows a positive value.

Some gauges can also measure negative pressure. This is useful in a vacuum chamber, which is a rigid chamber where some air has been pumped out. Because the pressure inside the chamber is below the surrounding atmospheric pressure, the gauge reads a negative value. Absolute pressure is found by adding gauge pressure and atmospheric pressure, and the absolute pressure of fluids cannot be negative.

Pressure is measured with many devices in everyday life and science. Examples include tire gauges and blood pressure monitors. Other common tools for fluids are manometers and barometers. More specialized pressure gauges include strain gauges, capacitance pressure gauges, piezoelectric pressure gauges, and ion gauges, which measure pressure by ionizing molecules in highly evacuated chambers. Different gauges work best in different pressure ranges and physical situations.

Gauge vs Absolute Pressure

characteristics of fluids

Fluid Behavior Under Force

Fluid behavior under force differs from the behavior of solids. When a force acts parallel to the top surface of a solid, the solid resists it because of internal friction between its layers. This is called shearing resistance. If the force is removed, the shearing forces help the solid return to its original shape. Other deformation forces can also change the shape of a solid for a short time, as long as the force stays below a threshold magnitude. Solids usually keep their shape, which makes...

/files/media/science-education/science-education-thumbs/14710.jpg

density

Density, Floating, and Specific Gravity

Density helps explain why objects sink or float in a fluid. It is also useful for identifying a substance and for learning about its phase and substructure. The SI unit of density is kg/m3, and the cgs unit is g/cm3. Liquids and solids usually have densities that are roughly comparable. That matches the fact that their atoms are in close contact. Gases have much lower densities than liquids and solids because their atoms are separated by large amounts of empty space. Density does not always...

pressure of fluids

Fluid Pressure in Everyday Life

Fluid pressure appears in many everyday situations, including blood pressure and weather systems. The same force can have a very different effect depending on the area it acts on. A force spread over 1 mm² creates 100 times more pressure than the same force spread over 1 cm². That is why a sharp needle can pierce skin with a small force, while the same force from a finger usually does not. Pressure is especially important when studying fluids. A fluid does not offer much resistance to a force...

variation of atmospheric pressure

Atmospheric Pressure and Altitude

Atmospheric pressure and altitude are closely linked. As height increases, atmospheric pressure decreases. This happens because the gravitational force per unit area becomes smaller as we move away from Earth’s surface. To describe this change, the atmosphere is treated with a constant air temperature at a given altitude. The ideal gas law of thermodynamics is also used as a good approximation for the air. Let p(y) be the atmospheric pressure at height y. The density ρ at y, the temperature T...

/files/media/science-education/science-education-thumbs/14711.jpg

pascal's law

Pascal’s Principle in Static Fluids

Pascal’s principle explains how pressure changes move through a fluid that is not flowing. A fluid at rest is in static equilibrium. If the fluid is water, it is in hydrostatic equilibrium. In this state, the net force on any part of the fluid must be zero, or the fluid will begin to flow. Blaise Pascal described this idea in 1653 in Treatise on the Equilibrium of Liquids. He showed that when pressure changes in an enclosed fluid, that change is transmitted without loss through the fluid and...

application of pascal's law

Hydraulic Force Transfer with Pascal's Law

Hydraulic force transfer uses Pascal's law to move pressure through an enclosed fluid. Pascal showed experimentally that a change in pressure applied to a confined fluid is transmitted undiminished throughout the fluid and to the walls of its container. That idea is the basis of hydraulics, a major part of modern mechanical technology. Hydraulic systems appear in automotive brakes, hydraulic jacks, and many other machines. A simple hydraulic system uses two pistons at the same height. Because...

pressure gauges

Pressure gauges often show pressure relative to atmospheric pressure. Many gauges, including those on scuba tanks, are set to read zero at atmospheric pressure. That reading is called gauge pressure. When the pressure inside the tank is higher than atmospheric pressure, the gauge shows a positive value. Some gauges can also measure negative pressure. This is useful in a vacuum chamber, which is a rigid chamber where some air has been pumped out. Because the pressure inside the chamber is below...

archimedes' principle

Buoyant Force from Fluid Pressure

Archimedes' principle explains buoyant force in a fluid. An upward buoyant force acts on an object that is partially or fully immersed in a fluid. This force is equal to the weight of the fluid displaced by the object. To see why an object floats, imagine removing a submerged object from the fluid. The space it occupied would be filled by fluid with weight w_fl. That weight is supported by the surrounding fluid, so the buoyant force must match the weight of the displaced fluid. The principle...

density and archimedes' principle

How Buoyancy Depends on Density

Buoyancy and density explain why some objects float and others sink. A lump of clay sinks in water, but the same clay can float when it is shaped like a boat. The change in shape lets it displace more water, which increases the buoyant force even though its mass stays the same. The same idea applies to steel ships. An object with an average density lower than the surrounding fluid will float. The fluid has more mass in the same volume, so it has more weight. The buoyant force equals the weight...

accelerating fluids

Fluid Pressure in an Accelerating Elevator

Fluid pressure changes when a liquid accelerates inside a moving container. A beaker placed in an elevator that moves upward with constant acceleration is one example. In this setup, the pressure and buoyant force equations must be modified. To find the pressure difference, the liquid is modeled as a thin vertical cylinder with height h and an infinitesimal cross-sectional area, ΔS. Three vertical forces act on this small fluid element. The liquid below the bottom surface pushes upward, the...

/files/media/science-education/science-education-thumbs/14713.jpg

surface tension and surface energy

Why Liquids Form Drops and Float

Surface tension and surface energy explain why liquids behave the way they do at their surface. A paint brush moves freely in water, but its bristles stick together after it is taken out. That change is caused by surface tension. Inside a liquid, bulk molecules feel attractive forces from nearby molecules in all directions. At the surface, molecules feel a net downward pull from the molecules below them. Because of this imbalance, the liquid surface acts like a stretched membrane and tries to...

/files/media/science-education/science-education-thumbs/14714.jpg

excess pressure inside a drop and a bubble

excess-pressure-inside-a-drop-and-a-bubble

Surface Tension in Drops and Bubbles

Surface tension sets the pressure difference in small drops and bubbles. For a tiny liquid drop, gravity can be neglected, so the drop is treated as spherical. It can also be viewed as two equal hemispherical drops joined together by surface tension. The forces on the drop come from three sources. The liquid inside pushes outward, the air outside pushes inward, and surface tension acts along the diameter between the two hemispheres. Since surface tension is force per unit length, it creates a...

/files/media/science-education/science-education-thumbs/14715.jpg

buoyancy

Buoyant Force in Sinking and Floating

Buoyant force explains why objects float, sink, or stay suspended in a fluid. A fluid can be a liquid or a gas, and every object placed in it experiences this upward force. A metal ball sinks, while a rubber ball floats. A submarine also changes its buoyancy to move up or down. The force comes from pressure changes in the fluid. Fluid pressure increases with depth because the weight of the fluid above also increases. That means the bottom of an object feels more pressure than the top. This...

contact angle

Wetting and Surface Curvature

Wetting and surface curvature describe how a liquid behaves where it meets a solid. When a solid is dipped into a liquid, the liquid surface can bend near the contact line. In some cases, the liquid rises along the solid. In others, the surface becomes convex or depressed near the solid. This behavior comes from cohesive and adhesive forces. Adhesive force is the attraction between molecules of different materials, such as a solid and a liquid. Cohesive force is the attraction between...

/files/media/science-education/science-education-thumbs/14737.jpg

rise of liquid in a capillary tube

Capillary Action in Thin Tubes

Capillary action explains why liquid can rise or fall in a very thin tube compared with the liquid around it. A capillary is a narrow cylindrical tube, and the effect becomes noticeable when it is dipped into a liquid. The movement happens because two forces act in opposite directions. Cohesive forces make liquid molecules stick to each other, so the liquid tends to hold together and form a rounded shape. Adhesive forces pull the liquid toward the walls of the container. In a narrow glass...

/files/media/science-education/science-education-thumbs/14738.jpg

laminar and turbulent flow

Fluid Motion Patterns in Air and Water

Fluid dynamics studies fluids in motion. Scientists often use velocity vectors to show fluid motion in places like meteorology. For example, wind in the atmosphere can be mapped with vectors that show the speed and direction of the wind at each point. Another way to show fluid motion is with a streamline. A streamline shows the path of a small volume of fluid as it flows. When the flow changes with time, the streamlines do not match the flow lines. The fluid velocity is always tangential to...

equation of continuity

Fluid Flow in Narrowing Pipes

Fluid flow in a pipe is described by flow rate and average speed. Flow rate, or volume flow rate, is the amount of fluid that passes a point through an area in a given time. It depends on both how fast the fluid moves and the size and shape of the conduit. For a river or pipe, a greater speed usually means a greater flow rate. A larger cross-sectional area also increases flow rate. That is why the same fluid can move differently through conduits of different sizes. The relationship becomes...

bernoulli's equation

Fluid Pressure and Speed in Motion

Bernoulli's equation connects fluid pressure with fluid speed. It helps explain why moving fluids can create pressure changes in everyday situations. One example is when two trains pass each other quickly and seem to pull inward. The same effect can happen when two cars pass each other at high speed. As the air between the trains or cars speeds up, its pressure drops. The air on the outside stays at atmospheric pressure. That pressure difference creates a net inward force on the vehicles.

bernoulli's principle

Fluid Pressure and Speed Changes

Bernoulli's equation links fluid pressure and fluid speed in a static, incompressible fluid. For horizontal flow, where gravitational energy density stays constant, the equation is especially useful. In that setting, the result is known as Bernoulli's principle. Bernoulli's principle says that fluid pressure drops when speed increases, and pressure rises when speed decreases. This pressure-speed relationship helps explain how moving fluids behave in simple flow situations. It also provides a...

bernoulli's principle: applications

Bernoulli's Principle in Fluid Devices

Bernoulli's principle helps explain how many fluid devices work when the fluid moves at a constant height. It is useful for devices that use fast flow to create low pressure and for devices that measure fluid speed. Some devices use this pressure change to pull one fluid into another. These are called entrainment devices. A Bunsen burner uses an adjustable gas nozzle to entrain air for proper combustion. An atomizer uses a squeeze bulb to make a jet of air that pulls perfume drops into the...

/files/media/science-education/science-education-thumbs/14739.jpg

energy conservation and bernoulli's equation

energy-conservation-and-bernoulli-s-equation

Bernoulli’s Equation in Streamlined Flow

Bernoulli’s equation describes energy in a moving fluid. It comes from the conservation of energy principle, or the work-energy theorem, applied to an incompressible, inviscid fluid in laminar, steady, irrotational flow. The equation says that pressure energy, potential energy, and kinetic energy per unit volume stay constant along a streamline. Each term has the units of energy per unit volume. The kinetic energy per unit volume is called kinetic energy density, and the potential energy per...

/files/media/science-education/science-education-thumbs/14753.jpg

viscosity

Viscosity and How Fluids Flow

Viscosity describes how easily a fluid flows. Water moves quickly, while honey and maple syrup flow slowly and stick to a surface. That difference comes from fluid friction between liquid layers and between a fluid and the material around it. In this example, water has a lower viscosity than honey and maple syrup. Viscosity is measured in newton-second per meter squared (N·s/m2) or pascal-second (Pa·s). It also changes with temperature and can differ from one fluid to another by several orders...

poiseuille's law and reynolds number

Fluid Resistance, Viscosity, and Flow Regime

Fluid resistance, viscosity, and flow regime shape how liquid moves through a horizontal tube. Fluid flows from high pressure to low pressure. The flow rate, Q, is the ratio of the pressure difference to the resistance in the tube. A larger pressure difference gives a higher flow rate. Poiseuille's law describes laminar flow of an incompressible fluid in a tube. In this relation, the factors that affect flow rate except pressure are grouped into resistance. Resistance depends on the tube size...

stokes' law

Terminal Velocity in a Viscous Fluid

Viscous forces act like friction in a liquid. They resist the relative motion of molecules and pull back on a solid body moving through the fluid. The size of this force depends on the body’s shape and size, its speed, and the liquid’s viscosity, density, and temperature. For a spherical solid object, the force in a fluid is described by Stokes’ law. This law applies only at low Reynolds number, when the flow is laminar and not turbulent. Experiments show that the force is proportional to the...

/files/media/science-education/science-education-thumbs/14736.jpg

key terms and concepts

Learn how gauge pressure differs from absolute pressure, why some gauges read negative values, and which pressure tools are used in tanks, vacuum chambers, and fluids.

Gauge vs Absolute Pressure | JoVE K12

physics

JoVE Core Física presenta la teoría y la aplicación de conceptos físicos fundamentales, como la cinemática, dinámica, mecánica de fluidos, estática, ondas y acústica, mediante animaciones audiovisuales concisas y fáciles de entender. Además, los vídeos de científicos en acción muestran la aplicación de los conceptos relacionados en experimentos de investigación clásicos y originales, realizados en laboratorios de todo el mundo.

motion-and-stability-forces-and-interactions

Motion and Stability: Forces and Interactions

9-12.P.1.4.b

physical-properties-of-minerals-i-crystals-and-cleavage

Physical Properties Of Minerals I: Crystals and Cleavage

Source: Laboratory of Alan Lester - University of Colorado Boulder
The physical properties of minerals comprise various measurable and discernible ...

physical-properties-of-minerals-ii-polymineralic-analysis

Physical Properties Of Minerals II: Polymineralic Analysis

Source: Laboratory of Alan Lester - University of Colorado Boulder
The physical properties of minerals include various measurable and discernible ...

Types of Building Stone

Building stones are sourced by extracting rock from natural rock deposits and shaping it into the specific forms and dimensions needed for building ...

4. Obtain, evaluate, and communicate information about the geologic conditions and processes that form different Earth materials.

9-12.ESS.2.4

Igneous Intrusive Rock

Source: Laboratory of Alan Lester - University of Colorado Boulder
Igneous rocks are products of the cooling and crystallization of high temperature ...

Igneous Volcanic Rock

Source: Laboratory of Alan Lester - University of Colorado Boulder
Igneous rocks are the products of cooling and crystallization of magma. Volcanic rocks ...

Quarrying of Stone

Quarrying involves the meticulous extraction of stone from a quarry by either using controlled explosions or precision cutting techniques to remove the ...

a. Plan and carry out investigations to explore the processes that form plutonic (intrusive) and volcanic (extrusive) igneous rocks of differing compositions and textures. Example: Conduct a crystallization experiment to determine how speed of cooling affects crystal size.

9-12.ESS.2.4.a

Acid Attack on Concrete

Acids interacting with concrete dissolve the hydrated cement paste, leading to a softened and structurally weakened material.
Acidity breaks down the ...

Abrasion Resistance of Concrete

Concrete abrasion can occur from vehicular wear on surfaces or abrasive solids in water, which erodes canal linings.
The shot-blast test evaluates ...

turbidity-and-total-solids-in-surface-water

Turbidity and Total Solids in Surface Water

Source: Laboratories of Margaret Workman and Kimberly Frye - Depaul University
Turbidity and total solids are related measurements addressing clarity of ...

b. Analyze and interpret data to explain the effects of mechanical and chemical weathering and erosion on Earth's materials by wind, water, ice, and gravity.

9-12.ESS.2.4.b

Making a Geologic Cross Section

Source: Laboratory of Alan Lester - University of Colorado Boulder
Geologic maps were first made and utilized in Europe, in the mid-to-late 18th century. ...

c. Construct an explanation using evidence from experiments, models, or data of the processes that create and transform igneous, sedimentary, and metamorphic rocks.

9-12.ESS.2.4.c

Pore Size Distribution

Capillary pores are considerably larger than gel pores, and various pore sizes exist within the hardened cement paste.
In conditions of partial hydration, ...

determination-of-moisture-content-in-soil

Determination of Moisture Content in Soil

Source: Laboratories of Dr. Ian Pepper and Dr. Charles Gerba - The University of Arizona
Demonstrating Author: Bradley Schmitz
Soils normally contain a ...

non-destructive-tests-for-concrete-strength

Non-destructive Tests for Concrete Strength

Non-destructive tests, such as the rebound hammer test and penetration resistance test, can be used to determine the strength of concrete in an existing ...

d. Plan and conduct an investigation on water's effect on surface and subsurface processes. Examples: Use particles of varying sizes to determine how the speed of water impacts particle distribution. Use the porosity and permeability of particles of various sizes to determine how the size and sorting of particles affects water movement.

9-12.ESS.2.4.d

gis-software-hardware-and-sources-of-gis-data

GIS Software, Hardware, and Sources of GIS Data

A Geographic Information System (GIS) combines specialized software and hardware to effectively manage, analyze, and present spatial and related data. GIS ...

Manipulation and Analysis

GIS manipulation and analysis functions are vital for decision-making and planning. These activities range from data retrieval tasks, such as selecting ...

Using GIS to Investigate Urban Forestry

Source: Laboratories of Margaret Workman and Kimberly Frye - Depaul University
Urban forests broadly include urban parks, street trees, landscaped ...

e. Obtain and communicate information about significant geologic characteristics in Alabama and the southeastern United States. Examples: types of rocks, caves, sinkholes, minerals, energy resources

9-12.ESS.2.4.e

The Fossil Record

The fossil record documents only a small fraction of all organisms that have ever inhabited Earth. Fossilization is a rare process, and most organisms ...

The Evidence for Evolution

Genetic variations accumulating within populations over generations give rise to biological evolution. Evolutionary changes can result in the formation of ...

5. Obtain, evaluate, and communicate information about major events in Earth's history.

9-12.ESS.2.5

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Isotopes

Elements have a set number of protons that determines their atomic number (Z). For example, all atoms with eight protons are oxygen; however, the number ...

a. Analyze and interpret data to sequence events in Earth's history, including relative and absolute dating techniques, principles of superposition and crosscutting relationships, igneous intrusions, radiometric dating, and the fossil record.

9-12.ESS.2.5.a

Extinction

The History of Life on Earth
Fossils of organisms that were different from anything alive today had been documented as early as the 17th century, but it ...

b. Construct an explanation based on evidence of how catastrophic and long-term events have impacted life on Earth, including mass extinctions.

9-12.ESS.2.5.b

The Colonization of Land

Changes in the environment of the early Earth drove the evolution of organisms. As prokaryotic organisms in the oceans began to photosynthesize, they ...

The Carbon Cycle

Carbon is the basis of all organic matter on Earth, and is recycled through the ecosystem in two primary processes: one in which carbon is exchanged among ...

What is Photosynthesis?

Photosynthesis is a multipart, biochemical process that occurs in plants as well as in some bacteria. It captures carbon dioxide and solar energy to ...

c. Construct explanations from evidence of how the flow of energy through Earth's systems has changed over time. Example: Earth's oxygen level was lowest during the Cryptozoic Eon (Precambrian) and highest in the Carboniferous.

9-12.ESS.2.5.c

an-overview-of-bgdgt-biomarker-analysis-for-paleoclimatology

An Overview of bGDGT Biomarker Analysis for Paleoclimatology

Source: Laboratory of Jeff Salacup&#160;- University of Massachusetts Amherst
Throughout this series of videos, natural samples were extracted and ...

an-overview-of-alkenone-biomarker-analysis-for-paleothermometry

An Overview of Alkenone Biomarker Analysis for Paleothermometry

d. Obtain, evaluate, and communicate information about important tectonic and geologic events that have occurred in Alabama over geologic time. Examples: geologic ages and types of rocks, fluctuations in sea levels, temperature changes

9-12.ESS.2.5.d

determining-spatial-orientation-rock-layers-with-brunton

Determining Spatial Orientation of Rock Layers with the Brunton Compass

Source: Laboratory of Alan Lester - University of Colorado Boulder
Most rock units exhibit some form of planar surfaces or linear features. Examples ...

6. Obtain, evaluate, and communicate information about the theory of plate tectonics.

9-12.ESS.2.6

Gauge vs Absolute Pressure

Description

Transcript

Tags

More videos by Standards