Name: quality control charts and lab records
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 1 min 5 s
Channel: JoVE

Una de las tres actividades cíclicas de aseguramiento de la calidad, el control de calidad, es un conjunto de actividades para certificar que un sistema está bajo control estadístico.
Estas actividades incluyen gráficos de control de calidad, pruebas de aptitud, documentación y archivo.
Un gráfico de control de calidad es un gráfico consecutivo de una característica del análisis que puede actuar como indicador cualitativo.
La característica de análisis específica se compara con el valor característico conocido del material de referencia. Se requiere una inspección de las condiciones de análisis cuando el valor medido se encuentra fuera del rango de límites controlados para una desviación estándar seleccionada del valor de referencia.
Las pruebas de aptitud son el análisis del rendimiento en varios laboratorios. El resultado de cada laboratorio se compara con la media de los resultados de todos los laboratorios como referencia o con un material de referencia certificado. Las variaciones de los diferentes laboratorios se caracterizan por la puntuación z.

control de calidad

El control de calidad es una de las tres actividades cíclicas de garantía de calidad que ayudan a mantener un sistema bajo control estadístico. Las actividades típicas de control de calidad incluyen la creación de gráficos de control de calidad, la realización de pruebas de competencia y la documentación y archivo de resultados.

El control de calidad ayuda a realizar un seguimiento de los datos, visualizar tendencias e identificar variaciones, lo que facilita la detección de desviaciones que pueden afectar la precisión de un análisis. Una forma de hacerlo es generar un gráfico de control de calidad, que traza los valores de una o más características analíticas a lo largo del tiempo. Estas características se controlan y miden repetidamente en diferentes momentos durante el análisis. Cada valor medido se compara con el valor conocido del material de referencia. Se requiere una inspección si un valor medido se encuentra fuera del rango de límites controlados, generalmente definidos como desviación estándar del valor de referencia. Si es necesario, se requieren modificaciones a las condiciones de análisis para mantener el control estadístico del sistema.

Las pruebas de competencia son el análisis simultáneo realizado en varios laboratorios. La media de los resultados obtenidos de todos los laboratorios o un valor de referencia estándar conocido se utiliza para comparar la variación en los resultados de los laboratorios individuales. La puntuación Z estima esta desviación de los valores con respecto al valor de referencia.

La documentación y el archivo son aspectos fundamentales del control de calidad que garantizan la transparencia y la trazabilidad en el proceso de laboratorio. Todas las actividades relacionadas con el control y el aseguramiento de la calidad deben estar debidamente documentadas, incluida la custodia de las muestras, la calibración de los instrumentos, los procedimientos operativos estándar y los resultados. Este proceso implica la creación de un registro completo que sirva como referencia para futuras comprobaciones.

Cada documento debe rastrearse claramente hasta la persona responsable de su creación o gestión. Esto a menudo requiere que los documentos estén firmados y fechados por la persona involucrada, lo que agrega responsabilidad al proceso. La documentación adecuada no solo respalda el control estadístico de un sistema, sino que también desempeña un papel clave en la identificación de variaciones en los procesos de control de calidad. Un archivo preciso garantiza que se puedan recuperar, evaluar y utilizar los datos pasados ​​para tomar decisiones informadas sobre análisis futuros.

Control de calidad

El control de calidad es una de las tres actividades cíclicas de aseguramiento de la calidad que ayudan a mantener un sistema bajo control estadístico. El control de calidad típico ...

Education

Educación

JoVE Core

Analytical Chemistry

Química Analítica

Unit 1

Unidad 1

Method Development and Sampling Techniques

Desarrollo de Métodos y Técnicas de Muestreo

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

TÉRMINOS Y CONCEPTOS CLAVE

Quality Control

quality control charts and lab records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis.

One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of reference material. If a result falls outside the controlled limits, usually set by standard deviation from the reference value, the sample needs inspection. The analysis conditions may then be adjusted to keep the system under statistical control.

Proficiency testing is another quality control activity. It involves the same sample or analysis being run across multiple laboratories at the same time. The mean result from all labs, or a known standard reference value, is used to compare how much individual lab results vary. A Z score is then used to estimate how far each value is from the reference value.

Documentation and archiving are also critical in quality assurance. Every step related to quality control should be recorded, including sample custody, instrument calibration, standard operating procedures, and results. These records create a clear reference for later checks and must trace back to the person responsible. Signing and dating documents adds accountability. Good archives make past data easy to retrieve, review, and use for future decisions.

Quality Control Charts and Lab Records

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling Materials in Solid, Liquid, Gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Learn how quality control charts, proficiency testing, documentation, and archiving help labs track data, check accuracy, and stay under statistical control.

Quality Control Charts and Lab Records | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Quality Control Charts and Lab Records

Description

Transcript

Tags