7.1
Trabajo
El trabajo se realiza cuando la energía se transfiere de un objeto a otro. En otras palabras, el trabajo es cuando una fuerza actúa sobre algo que exp…
Se dice que el trabajo se realiza cuando la energía se transfiere de una entidad a otra mediante la aplicación de la fuerza. Por ejemplo, cuando se aplica una fuerza F sobre una caja y se mueve a través de un desplazamiento ds, se trabaja contra la fuerza de fricción.
El incremento en el trabajo realizado durante el proceso es igual al producto escalar de los vectores de fuerza y desplazamiento.
Solo el componente de fuerza aplicado en paralelo al desplazamiento del objeto contribuye al trabajo realizado.
Cuando un objeto se mueve de la posición A a la B, el trabajo total realizado por la fuerza es la integral de la fuerza con respecto al desplazamiento a lo largo de la trayectoria del desplazamiento.
Para una fuerza que es constante tanto en magnitud como en dirección, la integral depende solo de los puntos extremos y, por lo tanto, el trabajo realizado es independiente del camino tomado.
Cuando una fuerza variable actúa sobre un objeto, como la expansión o compresión de un resorte, la fuerza del resorte se expresa en función de la distancia. El trabajo realizado por la fuerza del resorte a lo largo del desplazamiento desde la posición inicial hasta la posición final viene dado por esta ecuación, donde k es la constante del resorte.
View the full transcript and gain access to JoVE Core videos
Q1: What does it mean when work is done on an object?
Work is done when energy is transferred from one entity to another through the application of force. Specifically, work occurs when a force acts on an object that undergoes displacement from one position to another. The amount of work depends on both the force applied and how far the object moves in the direction of that force.
Q2: How is work calculated when force and displacement are not aligned?
Work is calculated using the dot product of force and displacement vectors. Only the component of force parallel to the displacement contributes to work done. Mathematically, this is expressed as the product of force magnitude, displacement magnitude, and the cosine of the angle between them, ensuring that perpendicular force components do not contribute to work.
Q3: Why does the path taken not affect work done by a constant force?
When a force is constant in both magnitude and direction, the work done depends only on the starting and ending positions, not the path between them. The integral of force with respect to displacement yields the same result regardless of the route taken. This path independence is a key property of work under constant force conditions.
Q4: What are the units of work in different measurement systems?
In the SI system, work is measured in Newton-meters (N·m), also called joules. In the English system, work is measured in foot-pounds (ft·lb). Both units represent force multiplied by distance, reflecting the fundamental definition that work equals force times displacement in the direction of motion.
Q5: How is work calculated when a variable force acts on an object?
For variable forces, work is calculated by dividing the displacement into infinitesimal segments and computing the dot product of force and displacement for each segment, then summing all increments. This approach applies to situations like spring compression or expansion, where force varies with position. The work done by a spring force is determined by integrating the force function over the displacement path.
Q6: What is the relationship between work and energy transfer?
Work is the mechanism by which energy is transferred between objects. When a force does work on an object, it transfers energy to that object, changing its state of motion or position. This energy transfer is fundamental to understanding how forces affect objects and is central to the work-energy theorem.
Q7: How does work calculation change when motion occurs along a curved path?
On curved paths, the force and displacement components vary at different points. Work is calculated by expressing force components as functions of position along the path and integrating these components with respect to displacement. The physical concept remains the same: calculate work for tiny displacements and add them up along the entire curved trajectory.