Análisis electrogravimétrico: descripción general

Electrogravimetric analysis determines analyte mass by electrolytically depositing it onto a pre-weighed working electrode. The electrode is submerged in a solution containing the analyte, and an appropriate potential is applied to drive deposition through reduction at the cathode or oxidation at the anode. After deposition completes, the electrode's weight increase directly gives the analyte's weight in the solution.

Underpotential occurs at a potential below the Nernst equilibrium potential and favors monolayer formation on the electrode surface rather than bulk metal deposition. Overpotential, a potential above the Nernst potential, is required for quantitative bulk metal film deposition. Overpotential enables the analyte to deposit in sufficient quantity for accurate mass measurement.

Deposition completeness is evaluated by exposing a fresh electrode surface to the used solution while continuing electrolysis and checking for new deposits. The absence of new deposits signifies the reaction is complete. Alternative methods include observing the disappearance of a colored analyte or using a spectrophotometer to quantitatively test for remaining analyte in solution.

In constant-current methods, overpotential may cause unwanted reactions that affect analysis accuracy. These side reactions occur because the applied potential may drive competing electrochemical processes at the electrode surface. Controlling the working electrode's potential or adding depolarizers, which scavenge excess electrons into non-interfering reactions, prevents these undesired side reactions.

Depolarizers prevent unwanted side reactions by scavenging excess electrons into non-interfering reactions that do not affect the analyte's deposited mass. By redirecting electron flow away from competing processes, depolarizers improve the accuracy and selectivity of the analysis. They work alongside potential control to ensure only the desired analyte deposits quantitatively on the electrode.

At the cathode, analytes deposit through metal cation reduction, where positively charged ions gain electrons and form solid metal on the electrode surface. At the anode, analytes deposit through oxidation, or the anode metal itself may oxidize and deposit. The choice of electrode and applied potential determines which process occurs and which analyte species deposits onto the working electrode.

Controlling the working electrode's potential prevents unwanted side reactions that would change the mass of deposited analyte and introduce error. By maintaining the potential at an optimal level—high enough for bulk deposition but not so high as to drive competing reactions—analysts ensure only the target analyte deposits quantitatively. This precision makes potential control essential for accurate gravimetric results.