Ley de Ohm

Ohm's law states that voltage across a resistor is directly proportional to the current flowing through it. The constant of proportionality is resistance, measured in ohms. This fundamental relationship allows engineers to predict how voltage and current interact in electric circuit elements, forming the basis for circuit analysis and design.

Resistance is directly proportional to a material's length and inversely proportional to its cross-sectional area. Resistivity, the proportionality constant, varies among materials. Conductors have low resistivities, enabling easy current flow, while insulators have high resistivities, blocking current. These properties determine how effectively a material resists electric current.

Linear resistors obey Ohm's law, maintaining a constant resistance regardless of applied voltage or current, creating a linear voltage-current relationship. Non-linear resistors do not follow this law; their resistance changes with applied voltage or current. This distinction is critical for circuit design, as non-linear components behave unpredictably under varying conditions.

A short circuit has zero resistance and voltage drop, allowing unlimited current flow. An open circuit has infinite resistance, preventing current flow while sustaining unrestricted voltage. These extreme cases represent circuit failures or intentional design elements. Understanding their behavior is essential for circuit protection and troubleshooting.

Conductance is the reciprocal of resistance, measuring how well an element conducts electric current. Measured in Siemens, one Siemens equals one ampere per volt. While resistance quantifies opposition to current flow, conductance quantifies the ease of current flow. These complementary properties provide different perspectives on a material's electrical behavior.

Resistors are typically made from metallic alloys or carbon compounds. These materials are chosen for their ability to model and control current-resisting behavior in circuits. The selection of material determines the resistor's resistivity, temperature coefficient, and overall performance characteristics in electrical applications.

Resistance is fundamental to controlling and regulating electrical power within circuits. By applying Ohm's law and understanding how resistance depends on material properties, engineers can design circuits that safely deliver appropriate voltage and current levels. Proper resistance selection prevents component damage and ensures efficient power distribution.