19.3
Eje circular: Tensión en rango lineal
Considere un escenario en el que un eje circular está sujeto a un torque que permanece dentro de los límites de la ley de Hooke, evitando cualquier de…
Considere un caso en el que el par aplicado al eje circular está dentro del límite de la ley de Hooke, por lo que no hay deformación permanente.
Ahora, recuerde la expresión para la deformación de cizallamiento. Multiplicándolo por el módulo de rigidez y utilizando la Ley de Hooke para el esfuerzo cortante y la deformación, se puede determinar una expresión para el esfuerzo cortante en un eje.
Recordemos que la suma de los momentos de las fuerzas elementales ejercidas sobre cualquier sección transversal del eje debe ser igual a la magnitud del par ejercido sobre el eje.
Sustituyendo el esfuerzo cortante y reorganizando los términos se obtiene una expresión con un término integral, que representa el momento polar de inercia de la sección transversal con respecto a su centro.
Otras reordenaciones y sustituciones de la tensión de cizallamiento máxima dan la fórmula de torsión elástica para la tensión de cizallamiento en un eje circular rígido y uniforme.
Sin embargo, para un eje hueco con r1 y r2 como radios interno y externo, el momento polar de inercia se expresa como una diferencia en la cuarta potencia de dos radios.
View the full transcript and gain access to JoVE Core videos
Q1: What is the elastic torsion formula for shearing stress in a circular shaft?
The elastic torsion formula determines shearing stress in a rigid uniform circular shaft by combining Hooke's Law with the polar moment of inertia. It derives from multiplying shearing strain by the modulus of rigidity, then ensuring the sum of moments on any cross-section equals the applied torque. This formula applies when torque remains within Hooke's law limit, preventing permanent deformation.
Q2: How does the polar moment of inertia differ between solid and hollow circular shafts?
For a solid circular shaft, the polar moment of inertia is calculated from the fourth power of the radius. For a hollow shaft with inner radius r1 and outer radius r2, the polar moment of inertia is expressed as the difference in the fourth power of both radii. This difference accounts for the removed material in the hollow center.
Q3: Why is the modulus of rigidity important in deriving shaft stress equations?
The modulus of rigidity relates shearing stress to shearing strain through Hooke's Law. When multiplied by the shearing strain expression, it enables derivation of the shearing stress equation for the shaft. This material property is essential for connecting elastic deformation behavior to the applied torque.
Q4: What role does the sum of moments play in the elastic torsion formula?
The sum of moments of elementary forces exerted on any cross-section of the shaft must equal the magnitude of the applied torque. This equilibrium condition is fundamental to deriving the elastic torsion formula. Substituting this relationship into the stress equation produces the integral term representing polar moment of inertia.
Q5: When can the elastic torsion formula be applied to a circular shaft?
The elastic torsion formula applies when torque remains within Hooke's law limit, ensuring no permanent deformation occurs. Under these conditions, the shaft exhibits linear elastic behavior, and shearing stress is directly proportional to shearing strain. This linear range assumption is critical for formula validity.
Q6: How does maximum shearing stress relate to the polar moment of inertia in torsion?
Maximum shearing stress is inversely proportional to the polar moment of inertia. After substituting for maximum shearing stress in the equilibrium equation, the polar moment of inertia emerges as a key geometric property. Larger polar moments of inertia reduce maximum stress for the same applied torque, which is why hollow shafts are often preferred in design of transmission shafts.
Q7: What assumptions must be satisfied for the elastic torsion formula to hold?
The shaft must be rigid and uniform with constant cross-section. Torque must remain within Hooke's law limit to prevent plastic deformation. The formula assumes linear elastic material behavior where shearing stress is proportional to shearing strain. These conditions ensure the derived relationships between torque, stress, and geometric properties remain valid.