26.4
Transformadores con relaciones de vueltas fuera del valor nominal
En escenarios que involucran transformadores en paralelo con valores nominales dispares, el desarrollo de modelos por unidad requiere acomodar relacio…
Los modelos de cantidad por unidad simplifican el análisis de transformadores en comparación con los modelos de cantidad real. Idealmente, el devanado del transformador se elimina cuando las relaciones de base de voltaje coinciden con las clasificaciones de voltaje de los devanados.
Sin embargo, la selección de bases de voltaje es un desafío para transformadores en paralelo con diferentes clasificaciones.
Para tales casos, se desarrollan modelos por unidad con relaciones de giro fuera de lo nominal, donde los voltajes base seleccionados no son proporcionales a las clasificaciones de voltaje del transformador.
Considere un transformador con voltajes nominales relacionados por el término a.
Si las bases de voltaje elegidas satisfacen una relación con el término b, el término c es su relación y se sustituye en la relación de voltaje nominal.
Esta configuración se puede modelar mediante dos transformadores en serie: uno que representa el modelo estándar por unidad con pérdidas y el otro un transformador ideal. En este modelo, las ramas excitadoras de derivación se descuidan por simplicidad.
Es posible que este modelo no se adapte a programas informáticos que no se adaptan a los devanados de transformadores ideales.
Una alternativa involucra ecuaciones nodales, proporcionando parámetros de admitancia que representan transformadores de relación de giro fuera de lo nominal en programas informáticos.
Para c real, se puede modelar una red de circuitos pi.
View the full transcript and gain access to JoVE Core videos
Q1: Why are per-unit models with off-nominal turns ratios needed for parallel transformers?
Per-unit models with off-nominal turns ratios are necessary when parallel transformers have different voltage ratings and selected base voltages are not proportional to the transformer's voltage ratings. Standard per-unit models assume voltage base ratios match winding voltage ratings, but this assumption fails for transformers with disparate ratings. Off-nominal models accommodate this mismatch, enabling accurate analysis of complex electrical systems with mixed transformer configurations.
Q2: How is an off-nominal turns ratio transformer represented in series modeling?
An off-nominal turns ratio transformer is modeled as two transformers in series: a standard per-unit model representing losses and practical aspects, and an ideal transformer representing the voltage ratio without losses. The ideal transformer component captures the non-standard turns ratio, while the per-unit model accounts for real transformer behavior. Shunt-exciting branches are typically neglected in this simplified representation.
Q3: What is the relationship between voltage bases and off-nominal turns ratios?
The off-nominal turns ratio, term c, is defined as the ratio of selected voltage bases divided by the transformer's rated voltage ratio. When chosen voltage bases satisfy a relationship involving term b and are substituted into the rated voltage relationship (term a), the resulting ratio c represents the deviation from nominal conditions. This ratio quantifies how far the selected bases deviate from the transformer's actual voltage ratings.
Q4: Why might series transformer models be unsuitable for computer programs?
Series transformer models with ideal transformer windings may not be compatible with computer programs that lack support for ideal transformer representations. These programs cannot process the ideal transformer component separately. To overcome this limitation, alternative modeling approaches using nodal equations and admittance parameters provide computer-compatible representations of off-nominal turns ratio transformers.
Q5: How do nodal equations help model off-nominal turns ratio transformers in software?
Nodal equations provide admittance parameters that represent off-nominal turns ratio transformers without requiring ideal transformer windings. This approach is compatible with most simulation software and computational tools. The admittance parameters derived from nodal equations offer a straightforward means of incorporating transformer behavior into computer-based analysis, making complex transformer networks easier to simulate.
Q6: What is a pi circuit network and when is it used for transformers?
A pi circuit network is a practical representation used to model transformers with off-nominal turns ratios when the turns ratio is a real number. The pi network effectively captures impedance characteristics and is compatible with most computational tools. This approach provides accurate representation of transformer behavior and is particularly useful for computer-based analysis of transformers with non-standard voltage bases.
Q7: How do per-unit models simplify transformer analysis compared to actual quantity models?
Per-unit models normalize transformer quantities to base values, eliminating the need to track actual voltage and current magnitudes. This normalization simplifies calculations and comparisons across transformers with different ratings. However, when voltage base ratios do not match winding voltage ratings, off-nominal turns ratios must be incorporated to maintain accuracy in the simplified model.