31.6
Control del regulador de turbina
El control de la turbina-regulador es crucial para mantener la estabilidad del sistema eléctrico al equilibrar la potencia mecánica de salida de la tu…
Las unidades turbina-generadoras en los sistemas de potencia almacenan energía cinética debido a su rotación, que se libera cuando aumenta la carga.
El par eléctrico de cada unidad aumenta para satisfacer el aumento de la carga, mientras que el par mecánico permanece constante, lo que provoca una caída en la velocidad y la frecuencia del rotor.
Este desequilibrio se corrige a través de la acción del regulador, que ajusta la potencia de salida mecánica en función de los cambios de frecuencia.
La relación frecuencia-potencia en estado estacionario para el control turbina-regulador implica cambios en la frecuencia, la potencia mecánica de salida de la turbina, el ajuste de la potencia de referencia y la constante de regulación, normalmente 0,05 por unidad.
Los cambios de carga hacen que el rotor se acelere o desacelere, creando perturbaciones de frecuencia transitorias, pero en condiciones normales, el rotor se estabiliza en un nuevo estado estacionario.
La suma de la relación frecuencia-potencia para cada unidad turbina-generador determina la respuesta de frecuencia en estado estacionario del sistema.
Las turbinas eólicas controlan la potencia de salida ajustando el ángulo de paso de las palas, un proceso modelado en los sistemas de control de paso, especialmente para las turbinas de tipo 3 y 4.
View the full transcript and gain access to JoVE Core videos
Q1: How does a turbine-governor control system respond to load changes in a power system?
When electrical load increases, turbine-generator units release stored kinetic energy to meet demand. The electrical torque rises while mechanical torque remains constant initially, causing rotor deceleration and frequency drop. The governor detects this frequency deviation and adjusts mechanical power output to restore balance, stabilizing the rotor at a new steady-state operating point.
Q2: What is the regulation constant in turbine-governor control, and why does it matter?
The regulation constant represents the slope of the frequency-power relationship, typically 0.05 per unit, expressed in Hz/MW. It quantifies how much mechanical power output changes in response to frequency deviation. A lower regulation constant means the governor responds more aggressively to frequency changes, improving system stability and frequency recovery after load disturbances.
Q3: Why does generator frequency drop when electrical load suddenly increases?
When load increases, electrical torque rises to meet demand, but mechanical torque from the turbine remains constant initially. This torque imbalance causes the rotor to decelerate, reducing rotor speed and the generator frequency proportionally. The frequency drop serves as a control signal that triggers the governor to increase mechanical power output and restore equilibrium.
Q4: How do wind turbines control power output differently from conventional turbine-generators?
Wind turbines adjust power output by changing blade pitch angle rather than adjusting fuel input. When wind power exceeds rated capacity, blades are pitched to limit mechanical power. Type 3 and Type 4 wind turbines measure turbine speed and electrical output, then adjust blade angle to maintain desired power output and prevent overload.
Q5: What role does kinetic energy play in turbine-generator transient response?
Turbine-generator units store kinetic energy due to their rotating masses. When load increases, this stored energy is released to supply the additional demand, temporarily sustaining power output while the governor adjusts mechanical input. This energy buffer allows time for governor action to stabilize frequency and prevent immediate system collapse during transient disturbances.
Q6: How does a turbine-governor block diagram model the control process?
The block diagram includes a regulation constant block that converts frequency deviation into power output change, a time delay block modeling governor-associated delays, and speed reference input and output power limiters. These components work together to ensure the governor responds appropriately to frequency changes while respecting physical constraints and system limits.
Q7: Why is steady-state frequency-power relationship important for system stability?
The steady-state frequency-power relationship shows that mechanical power changes are proportional to frequency deviation and reference power setting changes. Understanding this relationship allows engineers to predict how the system will stabilize after disturbances and design governors with appropriate regulation constants to maintain frequency within acceptable limits during load variations.