5.14
Densidad aparente de los áridos
La densidad aparente se refiere a la masa de partículas de árido que llenarían una unidad de volumen. El concepto de densidad aparente se origina de l…
La densidad aparente de los agregados indica la masa de los agregados dentro de una unidad de volumen, incluidos los espacios vacíos existentes entre ellos. Generalmente se expresa en libras por pie cúbico.
Los agregados que se compactan densamente logran una mayor densidad aparente en comparación con los agregados que se compactan sin apretar.
Cuando se compactan agregados de diferentes tamaños, las partículas más pequeñas llenan los espacios entre las partículas más grandes, lo que resulta en una densidad aparente más alta que cuando se compactan agregados de tamaños similares.
Además, la forma de los agregados también influye en su densidad aparente. Los agregados redondeados se empaquetan con menos vacíos que los angulares, lo que contribuye a una mayor densidad aparente de agregados redondeados.
Además, la existencia de humedad en la superficie de los agregados empuja a los agregados adyacentes a separarse, lo que dificulta su empaquetamiento denso.
El porcentaje de espacios vacíos se calcula utilizando la densidad aparente del agregado, la gravedad específica del volumen en el estado seco de superficie saturada del agregado y la masa unitaria de agua.
La cantidad de espacios vacíos indica el volumen de mortero requerido para llenar los espacios entre los agregados gruesos en la mezcla de concreto.
View the full transcript and gain access to JoVE Core videos
Q1: What does bulk density of aggregate measure?
Bulk density measures the mass of aggregate particles within a unit volume, including void spaces between them. It is typically expressed in pounds per cubic foot. This measurement is crucial when aggregates are batched by volume and helps convert quantities from mass to volume in concrete mix design.
Q2: How does aggregate size distribution affect bulk density?
Aggregates of a single size can only be compacted to a limited degree. When smaller particles are introduced into the gaps between larger particles, they fill voids and increase bulk density significantly. Optimal bulk density of a mixed aggregate is reached when fine aggregates constitute approximately 35 to 40 percent of the total aggregate mass.
Q3: Why does aggregate shape influence bulk density?
Rounded aggregates pack with fewer voids than angular ones, resulting in higher bulk density for rounded particles. The shape of aggregates directly affects how efficiently they arrange in space. Angular aggregates leave more void spaces between particles, reducing overall bulk density compared to their rounded counterparts.
Q4: What effect does moisture have on aggregate packing?
Surface moisture on aggregates pushes adjacent particles apart, hindering dense packing and reducing bulk density. This moisture content and bulking of aggregate is an important consideration during concrete batching. Dry aggregates achieve better compaction and higher bulk density than those with surface moisture present.
Q5: How are lightweight and heavyweight aggregates classified by bulk density?
Aggregates with bulk density less than 70 lb/ft³ are classified as lightweight, while those exceeding 130 lb/ft³ are considered heavyweight. Natural mineral aggregates like sand and gravel typically exhibit bulk density ranging from 95 to 100 lb/ft³ and produce normal weight concrete with a unit weight of about 150 lb/ft³.
Q6: How is void space percentage calculated in aggregates?
Void space percentage is calculated using bulk density, bulk specific gravity in the saturated surface-dry state, and unit mass of water. The amount of void spaces indicates the volume of mortar required to fill gaps between coarse aggregates in the concrete mix. This calculation is essential for accurate concrete mix design and material proportioning.
Q7: Why does compaction level affect bulk density differently?
Aggregates that are compacted densely achieve higher bulk density compared to loosely compacted aggregates. The degree of compaction directly influences how tightly particles arrange and how many voids remain. Dense compaction minimizes void spaces, resulting in greater mass per unit volume and improved concrete performance.