10.12
Hormigonado en climas fríos
Cuando el hormigón recién vertido se expone a temperaturas de congelación antes de que fragüe, el agua que contiene puede congelarse. Esta expansión a…
Durante el clima frío, cuando el concreto recién colocado comienza a congelarse antes de fraguar, el agua en el concreto se convierte en hielo, lo que resulta en su expansión.
El agua en forma de hielo no está disponible para la hidratación del cemento, durante la descongelación, se derrite en agua, lo que ayuda a la hidratación del cemento.
En consecuencia, el hormigón se endurece en su estado expandido, lo que da lugar a mayores volúmenes de vacío y debilita el hormigón.
Del mismo modo, la expansión al congelar el hormigón fraguado antes de que adquiera resistencia conduce a su disrupción.
El concreto se prepara usando agregados calentados con vapor o agua si la temperatura ambiente es inferior a 40 ° F.
Además, el uso de cemento Tipo III, aceleradores y aditivos incorporadores de aire en el concreto es ideal para el hormigonado en climas fríos.
El hormigón se coloca en un encofrado hecho de material aislante, y las superficies que reciben el hormigón deben estar libres de nieve.
Después de colocar el hormigón, se cubre con mantas durante un tiempo suficiente o, a veces, se construyen refugios a su alrededor y se añaden fuentes de calor en el interior para proteger el hormigón de las condiciones frías.
Por último, la temperatura del hormigón se controla mediante termopares instalados en el hormigón para garantizar un correcto aislamiento térmico.
View the full transcript and gain access to JoVE Core videos
Q1: Why does concrete weaken when exposed to freezing temperatures before it sets?
When freshly placed concrete freezes before setting, water inside converts to ice and expands, disrupting the hydration process. This expansion increases pore volumes in the hardened concrete, significantly weakening its structure. The ice also prevents cement hydration until thawing occurs, delaying strength development and leaving the concrete in a compromised expanded state.
Q2: What materials and methods prevent freeze damage in cold weather concreting?
Use heated aggregates and warm mixing water when ambient temperature falls below 40°F. Incorporate Type III cement, accelerators, and air-entraining admixtures to enhance cold-weather performance. Place concrete in insulating formwork, cover surfaces with blankets, and build shelters with heat sources around the concrete to maintain adequate temperature during curing.
Q3: How does monitoring concrete temperature help during cold weather placement?
Thermocouples installed strategically in concrete track temperature changes in real time, especially at corners and exposed surfaces prone to rapid cooling. Temperature monitoring enables timely adjustments to insulation and heating methods, ensuring concrete maintains sufficient warmth for proper hydration and strength development before freezing occurs.
Q4: What happens to concrete that freezes after gaining appreciable strength?
If concrete reaches appreciable strength before freezing, damage is somewhat mitigated because the structure can better resist expansion forces. However, ice formation still disrupts the concrete matrix and can cause types of non structural cracks in concrete, though the overall structural integrity remains less compromised than in freshly placed concrete.
Q5: How does ice formation affect cement hydration in cold weather concrete?
When water freezes in freshly placed concrete, it becomes unavailable for cement hydration reactions. Upon thawing, the ice melts back into water, which then aids hydration. This delay in the hydration process weakens the concrete's early strength development and leaves it vulnerable to further damage during subsequent freeze-thaw cycles.
Q6: What surface preparation is required before placing concrete in cold weather?
Surfaces receiving concrete must be free of snow and ice to ensure proper contact and bonding. Formwork should be made of insulating material to retain heat around the concrete. Proper surface preparation prevents thermal loss and ensures uniform temperature distribution throughout the placed concrete during the critical early curing period.
Q7: How does hot weather concreting differ from cold weather concreting strategies?
Cold weather concreting focuses on retaining heat through insulation, heated materials, and thermal monitoring to prevent freezing damage. Hot weather concreting addresses opposite challenges by managing excess heat and moisture loss. Both require temperature control, but cold weather prioritizes heat preservation while hot weather concreting emphasizes heat dissipation and hydration maintenance.