Controles del Biorreactor-II

Oxygen is essential for aerobic fermentations to support microbial growth and metabolite production. However, air contains only 20% oxygen and dissolves poorly in water—just 9 ppm at 20°C. Even fully saturated broth provides only seconds of oxygen availability, making continuous oxygen supply vital for high-demand processes like yeast growth or citric acid production.

A sparger, positioned below the lowest impeller, injects sterile or filtered air under pressure to create fine bubbles. These small bubbles increase the gas-liquid interface area, enhancing oxygen dissolution. Optimal sparger hole sizes range from 0.25 to 3.0 cm to balance efficiency and prevent clogging from culture medium solids.

Impellers are mechanical agitators with mixing arms that stir the fluid to distribute air uniformly and maintain consistent temperature throughout the broth. Agitation breaks down large bubbles into fine bubbles, increasing surface area for oxygen dissolution. It also reduces cellular aggregation in organisms prone to clumping and minimizes liquid film resistance.

Baffles are inserted into the fermentor to disrupt vortex formation by interfering with circular liquid motion. This disruption improves bubble dispersion and mixing efficiency throughout the medium. Baffles work alongside agitation to ensure uniform oxygen distribution and prevent dead zones where oxygen transfer is inefficient.

Oxygen must pass through gas film resistance, liquid film resistance, interfacial and bulk liquid resistances, cell cluster resistances, and finally cellular uptake. The liquid film resistance is typically the most significant barrier. Agitation helps disrupt this liquid film, making it a critical control parameter for improving overall oxygen transfer efficiency.

Exhaust air is filtered to prevent contamination of the environment and surrounding areas, especially with pathogenic organisms. Incoming sterile air can be produced via filtration or other sterilization techniques to ensure only clean air enters the bioreactor. This protects both the culture and external safety.

Agitation serves four primary functions: distributing air uniformly, minimizing liquid film resistance, ensuring homogenous mixing, and controlling microbial clump size. These processes are energy-intensive at scale and heavily optimized through engineering calculations. Effective design depends on medium viscosity and requires pilot-scale testing to balance efficiency with operational costs. Understanding bioreactor design and operational system principles is essential for optimizing these control parameters.