Name: aes sample handling and detection
Uploaded: 2024-12-05T18:32:15.000Z
Duration: 1 min 22 s
Channel: JoVE

K12 Standards

Pennsylvania State Academic Standards

9-12

Earth and Space Science

Space Systems

3.3.9-12.B

atomic-emission-spectroscopy-instrumentation

Atomic Emission Spectroscopy: Instrumentation

Le spectromètre d’émission atomique comprend un nébuliseur d’échantillons, une source de plasma, un dispositif d’isolement de longueur d’onde, des transducteurs et un contrôleur à microprocesseur.
L’échantillon est prélevé à l’aide d’une pompe péristaltique et transporté vers un nébuliseur, qui convertit la solution de l’échantillon en fines gouttelettes.
Les gouttelettes plus grosses sont dirigées vers un drain, tandis que les fines gouttelettes sont transportées par le gaz argon vers le plasma, généralement du plasma à courant continu ou du plasma à couplage inductif.
Dans le plasma, les échantillons sont atomisés en atomes et en ions en phase gazeuse et, lors d’une collision ultérieure, ils sont excités.
L’émission atomique ou ionique du plasma est ensuite séparée par un monochromateur, un polychromateur ou un spectrographe.
Les monochromateurs séparent les longueurs d’onde individuelles de manière séquentielle à travers une seule fente de sortie, tandis que les polychromateurs avec plusieurs fentes de sortie isolent plusieurs longueurs d’onde simultanément.
Alternativement, un spectrographe permet de surveiller simultanément une gamme de longueurs d’onde.
Le rayonnement isolé est converti en signaux électriques par des transducteurs photomultiplicateurs simples ou multiples ou des détecteurs à réseau et est analysé plus en détail.

spectroscopie d'émission atomique: instrumentation

L'instrumentation de la spectrométrie d'émission atomique (AES) implique divers composants, notamment des dispositifs d'atomisation qui convertissent les échantillons en atomes et ions en phase gazeuse. Il existe deux principaux types de dispositifs d'atomisation : les atomiseurs continus et discrets. Les atomiseurs continus, comme les plasmas et les flammes, introduisent les échantillons dans un flux constant, tandis que les atomiseurs discrets injectent des échantillons individuels à l'aide de seringues ou d'échantillonneurs automatiques. L'atomiseur discret le plus courant est l'atomiseur électrothermique.

La nébulisation est le processus d'introduction d'échantillons sous forme d'aérosols. Un nébuliseur génère une fine pulvérisation de gouttelettes à partir de l'échantillon liquide, permettant une atomisation efficace. Une fois atomisé, l'échantillon dans une flamme ou un plasma forme une population stable d'atomes, de molécules et d'ions. L'émission du plasma est ensuite séparée en longueurs d'onde constitutives à l'aide d'un dispositif d'isolation de longueur d'onde, tel qu'un monochromateur, un polychromateur ou un spectrographe. Le rayonnement isolé est converti en signaux électriques par des transducteurs ou des détecteurs matriciels, qui sont ensuite traités et analysés par des systèmes informatiques.

Les systèmes d'émission de plasma à couplage inductif (ICP) utilisent un plasma à haute température appelé torche à plasma d'argon au lieu d'une flamme. Cela permet une application plus large et une analyse multi-éléments rapide. Dans la source de plasma à courant continu (DCP), le chauffage du gaz inerte est obtenu par un arc à courant continu, établissant le plasma dans un flux de gaz à grande vitesse. La conception DCP utilise généralement un ensemble d'électrodes en forme de V inversé avec la région d'excitation à l'intersection des flux d'argon, et un nébuliseur est utilisé pour injecter l'échantillon à ce point.

Différents instruments sont disponibles pour les déterminations multi-éléments, notamment des spectromètres séquentiels qui scannent différentes lignes d'émission en séquence et des spectromètres simultanés qui utilisent des polychromateurs ou des spectrographes pour mesurer plusieurs longueurs d'onde simultanément. L'instrumentation de spectrométrie d'émission atomique offre différentes options de chemin optique, notamment des chemins optiques séquentiels avec des monochromateurs pour la mesure séquentielle des longueurs d'onde et des polychromateurs à lecture directe simultanée avec plusieurs fentes de sortie et phototubes pour la mesure simultanée de plusieurs lignes d'émission.

Spectroscopie d'émission atomique: instrumentation

L’instrumentation de la spectrométrie d’émission atomique (AES) implique divers composants, notamment des dispositifs d’atomisation qui convertissent les échantillons en phase gazeuse ...

Education

Enseignement

JoVE Core

Analytical Chemistry

Chimie analytique

Unit 1

Unité 1

Atomic Spectroscopy

Spectroscopie atomique

KEY TERMS AND CONCEPTS

TERMES ET CONCEPTS CLÉS

aes sample handling and detection

Atomic emission spectrometry (AES) uses sample handling, atomization, and detection parts to measure emitted light from atoms and ions. The sample must first be changed into a gas-phase form so it can produce a measurable signal.

AES uses two main atomizer types. Continuous atomizers, such as flames and plasmas, feed the sample in a steady stream. Discrete atomizers add one sample at a time with syringes or autosamplers. The electrothermal atomizer is the most common discrete type.

Many liquid samples are introduced by nebulization. A nebulizer makes a fine spray of droplets, called an aerosol, from the liquid sample. This helps the sample atomize efficiently. After atomization, the sample in a flame or plasma forms a steady mix of atoms, molecules, and ions.

The emitted light must then be separated by wavelength. Instruments use a monochromator, polychromator, or spectrograph to isolate the radiation. Transducers or array detectors turn the light into electrical signals. A computer system then processes and analyzes the data.

Some AES systems use inductively coupled plasma, or ICP, instead of a flame. An argon plasma torch creates a very hot plasma, which supports a wider range of uses and fast multi-element analysis. Direct-current plasma, or DCP, uses a DC arc to heat an inert gas in a high-velocity stream. Its design often includes an inverted V-shaped electrode setup, and the nebulizer injects the sample at the point where the argon streams meet.

AES instruments can also measure one wavelength at a time or several at once. Sequential spectrometers scan emission lines in order. Simultaneous spectrometers use polychromators or spectrographs to measure multiple wavelengths at the same time. In sequential optical paths, a monochromator measures one wavelength after another. In simultaneous direct-reading systems, multiple exit slits and phototubes collect several emission lines together.

AES Sample Handling and Detection

atomic spectroscopy: absorption, emission, and fluorescence

atomic-spectroscopy-absorption-emission-and-fluorescence

Element Analysis with Atomic Light Spectra

Atomic spectroscopy is used to identify and measure elements by their light signals. It supports both qualitative analysis, which tells what is present, and quantitative analysis, which tells how much is present. The optical methods in this group are atomic absorption spectroscopy, atomic emission spectroscopy, and atomic fluorescence spectroscopy. These methods begin with atomization. In this step, a solid, liquid, or solution sample is changed into gas-phase atoms and ions. Once the sample...

atomic spectroscopy: effects of temperature

atomic-spectroscopy-effects-of-temperature

How Heat Changes Atomic Spectra

Heat changes atomic spectra by affecting atomization, excitation, ionization, and line shape. In atomic spectroscopy, atomization means converting a sample into gas-phase atoms and ions. The flame temperature needed for this step changes how efficiently the method works and shifts the balance between excited and ground-state atoms. At thermal equilibrium, the relative numbers of excited and ground-state atoms can be estimated with the Maxwell-Boltzmann distribution. A small temperature rise...

atomic absorption spectroscopy: overview

Atomic Absorption Spectroscopy for Trace Metals

Atomic absorption spectroscopy (AAS) measures trace metals by tracking how atoms absorb electromagnetic radiation (EMR). The absorbed light makes atoms move to a higher-energy orbit. In AAS, the key step is atomization, which converts the sample into gas-phase atoms. A flame or a furnace is typically used for this step. Inside the flame, some atoms become thermally excited. Most stay in the ground state, which is the lowest-energy state. These ground-state gas-phase atoms absorb EMR only when...

atomic absorption spectroscopy: instrumentation

atomic-absorption-spectroscopy-instrumentation

Atomic Absorption Spectroscopy: Key Parts

Atomic absorption spectrophotometry uses a set of key parts to measure light absorbed by atoms. The main components are a radiation source, an atomizer, a monochromator, and a detector. Each part has a specific job in the instrument. The radiation source is usually a hollow-cathode lamp, or HCL, or an electrodeless-discharge lamp, or EDL. Both produce a narrow emission line at the needed wavelength. Some instruments instead use continuum sources with high-resolution monochromators to narrow...

atomic absorption spectroscopy: radiation and light sources

atomic-absorption-spectroscopy-radiation-and-light-sources

Choosing Light Sources for AAS Measurements

Atomic absorption spectroscopy (AAS) uses a light source that emits a very narrow range of wavelengths. This is needed because the source must match the absorption behavior of the analyte atom. The choice of source also depends on giving a precise, intense emission at the right wavelength for accurate detection. Two common line sources in AAS are hollow-cathode lamps (HCLs) and electrodeless-discharge lamps (EDLs). These lamps are selected based on the element being analyzed and the level of...

atomic absorption spectroscopy: atomization methods

atomic-absorption-spectroscopy-atomization-methods

Atomic Absorption Spectroscopy: Sample Atomization

Atomic absorption spectroscopy uses sample atomization to turn a liquid specimen into free atoms for analysis. The two main approaches are flame atomization and electrothermal atomization. Both methods prepare the sample so its atoms can be measured by the instrument. Flame atomization uses a nebulizer and spray chamber to mix the sample with a fuel-oxidant mixture. This creates a fine aerosol mist that enters the burner. The fuel and oxidant are usually close to a stoichiometric ratio, but a...

atomic absorption spectroscopy: interference

atomic-absorption-spectroscopy-interference

Correcting Errors in Atomic Absorption Spectroscopy

Atomic absorption spectroscopy interference can create systematic error by making the analytical signal or the background look stronger or weaker than it should be. In atomic absorption measurements, these errors are usually grouped as spectral interference, chemical interference, and physical interference. Spectral interference happens when signals from other elements or molecules overlap with the analyte signal, the substance being measured. This overlap can falsely raise or hide the analyte...

atomic absorption spectroscopy: lab

AAS Sample Prep and Calibration

Atomic absorption spectroscopy (AAS) depends on careful sample preparation and calibration. Samples must be turned into clear solutions before measurement. That often means extra treatment to dissolve materials such as soils, animal tissues, and minerals. Common sample prep methods include hot mineral acids, wet ashing, combustion in closed containers, high-temperature ashing, and fusion with reagents. These steps help make the sample suitable for AAS analysis. Solutions that contain organic...

atomic emission spectroscopy: overview

Atomic Emission Spectroscopy for Element Analysis

Atomic emission spectroscopy is used to identify the elements in a sample by measuring the light they emit. Atoms are first excited to higher energy levels by thermal energy from hot sources such as plasma, arcs, or sparks. When they fall back to lower energy levels, they give off light at specific wavelengths. Each element produces its own set of lines, so the emission spectrum can show both what is present and how much is there. AES instruments are similar to atomic absorption spectrometers,...

atomic emission spectroscopy: instrumentation

Atomic emission spectrometry (AES) uses sample handling, atomization, and detection parts to measure emitted light from atoms and ions. The sample must first be changed into a gas-phase form so it can produce a measurable signal. AES uses two main atomizer types. Continuous atomizers, such as flames and plasmas, feed the sample in a steady stream. Discrete atomizers add one sample at a time with syringes or autosamplers. The electrothermal atomizer is the most common discrete type. Many...

atomic emission spectroscopy: interference

atomic-emission-spectroscopy-interference

Reducing Interference in AES Signals

Atomic emission spectroscopy (AES) can produce interfering signals when atoms and molecules in a flame or plasma emit overlapping light. High-temperature atomizers excite many species at once, including oxides, hydroxides, and flame combustion products. These extra emissions can make the analyte signal harder to read. Spectral interference happens when emission lines or bands overlap. One way to reduce it is to improve instrument resolution. Another is to choose a different emission line for...

inductively coupled plasma atomic emission spectroscopy: principle

inductively-coupled-plasma-atomic-emission-spectroscopy-principle

ICP-AES Torch and Sample Analysis

Inductively coupled plasma atomic emission spectroscopy uses a plasma torch to analyze elements in a sample. This method is also called inductively coupled plasma optical emission spectroscopy, or ICP-OES. It is widely used because the plasma creates a strong environment for elemental analysis. The ICP source, or torch, contains three concentric quartz tubes. Argon gas flows through the tubes. A spark from a Tesla coil starts the ionization of argon and creates a high-temperature plasma. The...

inductively coupled plasma atomic emission spectroscopy: instrumentation

inductively-coupled-plasma-atomic-emission-spectroscopy

ICP-AES Instrument Types and Detection

Inductively coupled plasma atomic emission spectroscopy, or ICP-AES, uses an inductively coupled plasma to detect and analyze elements in a sample. The method measures the light given off by atoms, which helps identify and compare different elements. It is a common approach in atomic emission spectroscopy. ICP-AES instruments are built in three main forms: sequential, simultaneous multichannel, and Fourier transform instruments. Fourier transform designs are less commonly used, but they are...

atomic emission spectroscopy: lab

Plasma Sources in Atomic Emission Spectroscopy

Atomic emission spectroscopy uses plasma sources to identify elements by their light. The method creates abundant spectra with characteristic emission lines. Inductively coupled plasma, or ICP, is especially useful because it gives strong quantitative data. It works well under stable conditions, with low noise, low background, and few interferences. Newer air-operated microwave sources are also being studied. These sources may be more cost-effective than conventional ICP systems. Atomic...

atomic fluorescence spectroscopy

Measuring Elements by Atomic Fluorescence

Atomic fluorescence spectroscopy measures elements by detecting the light atoms give off after they are excited by electromagnetic radiation. The atoms are first placed in a flame, furnace, or plasma. They absorb energy, become excited, and then release that energy as they return to their original state. The emitted light is called fluorescence. The fluorescence is observed at a right angle to the incoming beam. This setup helps separate the emitted light from the light used to excite the...

flame photometry: overview

Flame Emission Spectrometry Basics

Flame emission spectrometry uses a flame to excite elements in a sample so their light can be measured. It is also called flame photometry. The method can be used for both qualitative and quantitative analysis of elements. The idea became established in the early 1860s when Kirchhoff and Bunsen showed that specific elements give off characteristic radiation in a flame. The first instrument for this purpose measured sodium in plant ash with a Bunsen flame. A major problem was how to add the...

flame photometry: lab

Flame Photometry and Metal Detection

Flame photometry is a method for detecting metals by measuring the light they emit in a flame. A solution such as potassium chloride is aspirated into the flame. The solvent evaporates first. The remaining salt becomes dehydrated and then dissociates into free gaseous atoms in the ground state. Some of these atoms absorb energy from the flame and move to an excited state. When they return to the ground state, they emit photons at characteristic wavelengths. These emissions are very narrow...

key terms and concepts

Learn how atomic emission spectrometry uses atomizers, nebulizers, ICP and DCP sources, and detectors to separate and measure emitted light from samples.

AES Sample Handling and Detection | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

the-principle-of-superposition-and-the-gravitational-field

The Principle of Superposition and the Gravitational Field

The principle of superposition applies to gravitational forces of objects that are sufficiently far apart. It states that the net gravitational force on a ...

/files/media/science-education/science-education-thumbs/14754.jpg

Escape Velocity

The escape velocity of an object is defined as the minimum initial velocity that it requires to escape the surface of another object to which it is ...

circular-orbits-and-critical-velocity-for-satellites

Circular Orbits and Critical Velocity for Satellites

The Moon orbits around the Earth. In turn, the Earth (and other planets) orbit the Sun. The space directly above our atmosphere is filled with artificial ...

energy-of-a-satellite-in-a-circular-orbit

Energy of a Satellite in a Circular Orbit

Thousands of artificial satellites orbit the Earth every day at various distances from the Earth. Satellites that orbit the Earth below an altitude of ...

Kepler's First Law of Planetary Motion

In the early 17th century, German astronomer and mathematician Johannes Kepler postulated three laws for the motion of planets in the solar system. He ...

Kepler's Second Law of Planetary Motion

In the early 17th century, German astronomer and mathematician Johannes Kepler postulated three laws for the motion of planets in the solar system. His ...

Kepler's Third Law of Planetary Motion

In the early 17th century, German astronomer and mathematician Johannes Kepler postulated three laws for the motion of planets in the solar system. In ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Transmutation

Nuclear transmutation is the conversion of one nuclide into another. It can occur by the radioactive decay of a nucleus, or the reaction of a nucleus with ...

Atomic Structure

All matter is composed of atoms, the smallest individual units of elements. Each atom is made up of three subatomic particles: protons, neutrons, and ...

Radioactivity and Nuclear Equations

Nuclear chemistry is the study of reactions that involve changes in nuclear structure. The nucleus of an atom is composed of protons and, except for ...

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Students who demonstrate understanding can develop a model based on evidence to illustrate the life span of the sun and the role of nuclear fusion in the sun's core to release energy in the form of radiation.  Clarification Statement: Emphasis is on the energy transfer mechanisms that allow energy from nuclear fusion in the sun's core to reach Earth.  Examples of evidence for the model include observations of the masses and lifetimes of other stars, as well as the ways that the sun's radiation varies due to sudden solar flares ("space weather"), the 11-year sunspot cycle, and non-cyclic variations over centuries.  Assessment Boundary: Assessment does not include details of the atomic and sub-atomic processes involved with the sun's nuclear fusion.

3.3.9-12.A

Emission Spectra

When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a ...

Atomic Spectroscopy: Absorption, Emission, and Fluorescence

Atomic spectroscopy is a vital tool in elemental analysis, both qualitatively and quantitatively. It can be broadly divided into optical spectroscopy, ...

Detection of Black Holes

Although black holes were theoretically postulated in the 1920s, they remained outside the domain of observational astronomy until the 1970s.
Their ...

space-time-curvature-and-the-general-theory-of-relativity

Space-Time Curvature and the General Theory of Relativity

In 1905, Albert Einstein published his special theory of relativity. According to this theory, no matter in the universe can attain a speed greater than ...

Schwarzschild Radius and Event Horizon

No object with a finite mass can travel faster than the speed of light in a vacuum. This fact has an interesting consequence in the domain of extremely ...

The Wave Nature of Light

The nature of light has been a subject of inquiry since antiquity. In the seventeenth century, Isaac Newton performed experiments with lenses and prisms ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Metal Flame Emission

Metal Flame Emission
Flame testing is an analytical technique where a sample is placed in a flame, and the characteristic flame color is used to identify ...

molecular-spectroscopy-absorption-and-emission

Molecular Spectroscopy: Absorption and Emission

Molecules possess discrete energy levels called quantum states. Unlike atoms, which have simpler energy levels, molecules possess additional rotational ...

The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase ...

Atomic Absorption Spectroscopy: Radiation and Light Sources

Atomic absorption spectroscopy (AAS) relies on the Beer-Lambert law, which requires that the radiation source emits a narrow range of wavelengths to match ...

Students who demonstrate understanding can construct an explanation of the Big Bang theory based on astronomical evidence of light spectra, motion of distant galaxies, and composition of matter in the universe.  Clarification Statement: Emphasis is on the astronomical evidence of the red shift of light from galaxies as an indication that the universe is currently expanding, the cosmic microwave background as the remnant radiation from the Big Bang, and the observed composition of ordinary matter of the universe, primarily found in stars and interstellar gases (from the spectra of electromagnetic radiation from stars), which matches that predicted by the Big Bang theory (3/4 hydrogen and 1/4 helium).  Assessment Boundary:

Spectrophotometry: Introduction

Spectrophotometry is the quantitative measurement of the absorption, reflection, diffraction, or transmission of electromagnetic radiation through a ...

Atomic Emission Spectroscopy: Overview

Atomic emission spectroscopy (AES) is an analytical technique used to determine the elemental composition of a sample by analyzing the light emitted from ...

ultraviolet-and-visible-uvvis-spectroscopy-overview

Ultraviolet and Visible (UV&ndash;Vis) Spectroscopy: Overview

Ultraviolet&#8211;visible (UV&#8211;visible or UV&#8211;Vis) spectroscopy is an analytical technique that investigates the interaction between matter and ...

Atomic Emission Spectroscopy: Lab

AES is a powerful analytical technique, especially effective when used with plasma sources, producing abundant spectra in characteristic emission lines. ...

Flame Photometry: Overview

Flame photometry, also known as flame emission spectrometry, is a technique used for the qualitative and quantitative analysis of elements present in a ...

The Greek philosopher Democritus proposed that everything on Earth is made up of tiny particles called atomos, Greek for &#34;indivisible,&#34; from which ...

Students who demonstrate understanding can communicate scientific ideas about the way stars, over their life cycle, produce elements.  Clarification Statement: Emphasis is on the way nucleosynthesis, and therefore the different elements created, varies as a function of the mass of a star and the stage of its lifetime.  Assessment Boundary: Details of the many different nucleosynthesis pathways for stars of differing masses are not assessed.

3.3.9-12.C

Tidal Forces

The origin of Earth&#39;s ocean tides has been a subject of continuous investigation for over 2000 years. However, the work of Newton is considered to be ...

Students who demonstrate understanding can use mathematical or computational representations to predict the motion of orbiting objects in the solar system.  Clarification Statement: Emphasis is on Newtonian gravitational laws governing orbital motions, which apply to human-made satellites as well as planets and moons.  Assessment Boundary: Mathematical representations for the gravitational attraction of bodies and Kepler's Laws of orbital motions should not deal with more than two bodies, nor involve calculus.

3.3.9-12.D

AES Sample Handling and Detection

Description

Transcript

Tags

More videos by Standards