Question 1

How is work done calculated in an adiabatic process?

Accepted Answer

In an adiabatic process, work done can be calculated using the internal energy change expressed in terms of temperature change. Alternatively, use the adiabatic condition relating initial and final pressures and volumes. By integrating the work expression during volume change with the pressure relationship, you can determine the total work done by the gas during adiabatic expansion or compression.

Question 2

What happens to pressure and temperature when a gas undergoes adiabatic compression?

Accepted Answer

During adiabatic compression, both pressure and temperature of the gas increase significantly. As the volume decreases, the gas is compressed without heat exchange, causing internal energy to rise and temperature to increase. This temperature increase results in higher pressure, which is why diesel engines achieve fuel ignition without spark plugs through adiabatic compression of the air-fuel mixture.

Question 3

Why does a weather balloon expand as it rises in the atmosphere?

Accepted Answer

A weather balloon expands adiabatically as it rises because atmospheric pressure decreases with altitude. With no heat exchange occurring, the gas inside expands to fill a larger volume. The decreasing external pressure allows the helium gas to expand from its initial volume to a final larger volume while the pressure and temperature of the gas decrease.

Question 4

How does adiabatic compression differ from isothermal compression?

Accepted Answer

In adiabatic compression, no heat is exchanged with surroundings, so temperature and pressure increase significantly as volume decreases. In isothermal compression, temperature remains constant while heat is removed, resulting in lower final pressure. Adiabatic compression produces higher pressure and temperature changes, which is why it enables spontaneous fuel ignition in diesel engines.

Question 5

What does the negative sign indicate in adiabatic work calculations?

Accepted Answer

A negative work value indicates that work is done on the gas rather than by the gas. During adiabatic compression, the piston performs work on the gas mixture, compressing it to a smaller volume. The negative sign distinguishes compression work from expansion work, where positive values represent work done by the expanding gas on its surroundings.

Question 6

How can you find final pressure and temperature in an adiabatic process if initial conditions are known?

Accepted Answer

Use the adiabatic condition equation relating pressure and volume with the molar heat capacity ratio (gamma) of the gas. Substitute known initial pressure, volume, and final volume to calculate final pressure. Then apply the ideal gas law using the calculated final pressure to determine final temperature. This approach solves adiabatic compression problems in engines and atmospheric systems.

Question 7

What role does the heat capacity ratio play in adiabatic processes?

Accepted Answer

The molar heat capacity ratio (gamma), typically 1.4 for air, is essential in adiabatic process equations relating pressure, volume, and temperature. This dimensionless ratio appears in the adiabatic condition and determines how significantly pressure and temperature change during compression or expansion. Different gases have different gamma values, affecting their adiabatic behavior.

Travail effectué dans un processus adiabatique

Browse More Videos