Les circuits RL

An RL circuit consists of a resistor and an inductor connected either in series or parallel, typically with a source of emf. The inductor prevents rapid changes in current, which is useful when a steady current is required but the external source has fluctuating emf. This combination allows controlled current behavior in the circuit.

When a switch closes in an RL circuit, the initial rate of current increase equals emf divided by inductance. Greater inductance results in slower current increase. As current builds over time, the rate of change decreases until the circuit reaches steady state, where current no longer depends on inductance. Understanding current growth and decay in RL circuits reveals how inductance controls this transient behavior.

At steady state, the final current in an RL circuit equals emf divided by resistance and does not depend on inductance. This is the same current that would flow if only the resistor were connected to the emf source. Once steady state is reached, the rate of current change becomes zero.

The time constant of an RL circuit equals inductance divided by resistance and measures how quickly current builds toward its final value. For a given resistance, larger inductance values produce larger time constants, causing slower current rise. Smaller inductance values result in rapid current rise to the final steady-state value.

When an RL circuit is modified to bypass the battery, the current decays slowly and smoothly across the resistor and inductor. The inductor resists this change in current, causing a gradual decay rather than an abrupt stop. This smooth decay is characteristic of inductive behavior in circuits.

Inductance only affects the rate at which current changes, not its final value. By Kirchhoff's loop rule, at steady state the rate of current change approaches zero, eliminating the inductor's voltage contribution. The final current then depends only on emf and resistance, making inductance irrelevant to the steady-state value.

The inductor in an RL circuit prevents rapid changes in current, providing stability when the external emf source fluctuates. By resisting sudden current variations, the inductor helps maintain a more steady current flow through the circuit. This protective function is valuable in applications requiring consistent current despite source instability.