Les machines

Machines are structures made of movable, pin-connected multi-force members that form a stabilized system to transmit forces. Unlike rigid structures, machines contain components that move relative to each other while remaining connected at pivot points. This design allows machines to convert applied forces into larger reaction forces, enabling them to perform work efficiently.

Cutting pliers amplify forces through lever mechanics. When equal and opposite forces are applied to the handles, they create a moment about the pivot pin. This moment relationship means the reaction forces at the cutting edges are greater than the applied forces on the handles, allowing the pliers to cut wire with less manual effort.

A free-body diagram isolates each component of a machine and shows all forces acting on it. By drawing free-body diagrams for machine parts and taking moments about the pivot pin, engineers can establish relationships between applied and reaction forces. This analysis reveals how forces are transmitted through the machine and determines internal forces at connection points.

The pivot pin is the central connection point that holds machine components together and enables their relative motion. By taking moments about the pivot pin, engineers establish direct relationships between applied forces and reaction forces at different distances. The pivot pin also experiences internal forces that can be determined through free-body diagram analysis and equilibrium conditions.

Force equilibrium conditions state that the sum of forces in each direction must equal zero for a component in equilibrium. Applying horizontal equilibrium determines that internal force components perpendicular to the primary direction are zero. Applying vertical equilibrium shows that internal vertical forces equal the sum of applied and reaction forces acting on the component.

The moment relationship in machines shows that applied and reaction forces are inversely proportional to their distances from the pivot pin. A force applied farther from the pivot creates a larger moment, resulting in a greater reaction force closer to the pivot. This principle explains why longer handles on cutting pliers produce larger cutting forces at the edges.