6.5
Test d'affaissement
View the full transcript and gain access to JoVE Core videos
Q1: What equipment and dimensions are used in a slump test?
The slump test uses a 12-inch high truncated cone mold that tapers from eight inches at the base to four inches at the top. A steel tamping rod with a five-eighths-inch diameter and rounded end compacts the concrete. The mold is securely attached to a flat base and dampened before use to ensure accurate measurement of concrete workability.
Q2: How is concrete prepared and compacted during a slump test?
Concrete is added to the dampened mold in three layers, with each layer compacted 25 times using the steel tamping rod. After compacting all layers, the top surface is struck off level. This systematic compaction ensures even distribution and eliminates air pockets, providing consistent results for measuring workability of concrete.
Q3: What does the slump measurement tell you about concrete quality?
The slump, measured to the nearest quarter inch, indicates the concrete's ability to flow and consolidate. A true slump shows proper cohesion and workability. Excessively high or low slump values alert operators to potential mix issues requiring immediate correction in bulk concreting operations.
Q4: What is a shear slump and why does it matter?
A shear slump occurs when concrete slides down the mold instead of maintaining its conical shape, indicating the mix lacks cohesion. This result requires retesting and suggests potential structural problems. Persistent shear slump signals that the concrete mix needs adjustment before use in construction.
Q5: Why is the slump test unreliable for lean concrete mixes?
Lean mixes, which contain lower cement content, tend to collapse completely during the slump test rather than slumping gradually. This collapse makes measurement impossible and prevents accurate assessment of the mix's workability. The test's limitations with lean mixes highlight the need for alternative testing methods in such cases.
Q6: How do predetermined slump values guide concrete mix adjustments?
Recommended slump values are predetermined based on specific workability requirements for different applications. When actual slump measurements deviate from these standards, they serve as an immediate alert for mix corrections. This guidance ensures concrete meets performance specifications before placement in structural elements.
Q7: What causes differences between true slump and shear slump results?
A true slump reflects proper concrete cohesion, where the material maintains structural integrity while settling. Shear slump indicates insufficient cohesion, causing the concrete to slide rather than slump uniformly. These differences reveal segregation in fresh concrete and mix design problems that affect concrete performance and durability.