Name: cell cycle checkpoints and cyclin control
Uploaded: 2025-05-22T09:05:54.000Z
Duration: 1 min 28 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Biology

BIO.6

BIO.6.A

The Cell Cycle Control System

Il sistema di controllo del ciclo cellulare presenta proteine regolatrici che arrestano il ciclo cellulare nelle fasi G1, G2 e mitotica.
Aiutano a prevenire l'inizio della fase successiva fino a quando le fasi precedenti non sono state completate senza alcun errore.
Inoltre, queste proteine regolatrici chiave, chiamate chinasi proteiche ciclina-dipendenti o Cdk, formano complessi con le cicline e assicurano che tutte le fasi siano coordinate e correttamente sincronizzate.
Al checkpoint G1, la proteina regolatrice controlla se la cellula ha raggiunto la dimensione critica, se il DNA è privo di errori e se sono presenti nutrienti e fattori di crescita sufficienti per entrare nella fase S per la sintesi del DNA.
Se la cella non riceve il segnale necessario, passa a uno stato di riposo o a una fase G0.
In caso contrario, il DNA viene replicato e la cellula incontra il checkpoint G2, dove le proteine regolatrici verificano la presenza di errori nel DNA prima di entrare in mitosi.
Durante la mitosi, dopo che la proteina regolatrice ha verificato che i cromosomi sono attaccati al fuso e sono accuratamente allineati, la cellula procede alla divisione.
In qualsiasi momento del ciclo cellulare, se la proteina regolatrice rileva un danno irreparabile, si verifica la morte cellulare.

il sistema di controllo del ciclo cellulare

Il sistema di regolazione del ciclo cellulare dirige come una cellula procede da una fase alla successiva e inizia la mitosi. Il sistema di controllo del ciclo cellulare comprende molecole regolatrici intracellulari e segnali esterni. Questi forniscono segnali di "stop" o "avanti" e operano in specifiche fasi del ciclo cellulare chiamate punti di controllo per garantire che un determinato processo sia completato prima che la cellula passi alla fase successiva. Le cicline e le chinasi dipendenti dalle cicline (Cdks) sono i principali regolatori del ciclo cellulare e svolgono la loro funzione nelle fasi G1, G2 e M del ciclo cellulare. I regolatori al punto di controllo G1 verificano che siano disponibili condizioni adeguate per la sintesi del DNA, come la dimensione della cellula e i fattori di crescita. Se una cellula non soddisfa questi requisiti, gli viene impedito di entrare nella fase S. La cellula interrompe il ciclo cellulare o passa alla fase G0 fino a quando non vengono soddisfatte le sue esigenze. I regolatori al punto di controllo G2 verificano che il DNA replicato sia privo di danni o errori; in caso contrario, il meccanismo di riparazione del DNA ripara i danni e quindi consente alla cellula di progredire alla fase successiva. I regolatori del punto di controllo della fase M garantiscono che le cromatidi sorelle siano correttamente allineate e attaccate ai microtubuli nel piano equatoriale della metafase. Ciconsente alla cellula di progredire alla fase anafasica della divisione cellulare e di produrre due cellule figlie con lo stesso numero di cromosomi. Se una cellula non supera uno dei punti di controllo sopra citati e continua a procedere attraverso la mitosi, accumula mutazioni che possono alla fine portare a una crescita incontrollata o alla formazione di tumori. Questo testo tratto da <a href="https://openstax.org/books/anatomy-and-physiology/pages/3-5-cell-growth-and-division">Openstax, Anatomy and Physiology 2e, Section 3.5: Section Title Cell Growth and Division</a>

Il sistema di controllo del ciclo cellulare

La regolazione del ciclo cellulare dirige il modo in cui una cellula procede da una fase all'altra e inizia la mitosi. Il sistema di controllo del ciclo cellulare include ...

Education

Didattica

JoVE Core

Anatomy and Physiology

Anatomia e Fisiologia

Unit 1

Unità 1

Essential Cellular Processes

Processi cellulari essenziali

KEY TERMS AND CONCEPTS

TERMINI E CONCETTI CHIAVE

cell cycle checkpoints and cyclin control

The cell cycle is controlled by checkpoints that help a cell move from one phase to the next and begin mitosis. This control system uses internal regulatory molecules and outside signals to send stop or advance instructions. It makes sure each step is finished before the cell moves forward.

Cyclins and cyclin-dependent kinases, or Cdks, are the main regulators of the cell cycle. They act during the G1, G2, and M phases. These regulators work at specific checkpoints to keep cell division orderly.

The G1 checkpoint checks whether the cell is ready for DNA synthesis. It looks at conditions such as cell size and growth factors. If these needs are not met, the cell does not enter S phase. Instead, it may pause the cycle or move into G0 until the conditions improve.

The G2 checkpoint reviews the replicated DNA before the cell moves on. It checks for damage or copying errors. If problems are found, DNA repair mechanisms fix the damage before the cell continues.

The M phase checkpoint acts during metaphase. It checks that sister chromatids are correctly aligned and attached to microtubules at the equatorial plane. When this happens, the cell can move into anaphase and form two daughter cells with the same number of chromosomes.

If a cell passes through these checkpoints without correction, mutations can build up. Over time, this may lead to uncontrolled growth or tumor formation. For that reason, cell cycle checkpoints are important for keeping division accurate.

Cell Cycle Checkpoints and Cyclin Control

cell-cycle-checkpoints-and-cyclin-control

the central dogma

Central Dogma: DNA to Protein

The central dogma explains how genetic information flows in cells from DNA to RNA to protein. It is a core idea in molecular biology and helps show how genes influence cell function. DNA stores the instructions. During transcription, a cell copies a gene into RNA, which is a related nucleic acid. That RNA message can then be used in translation to build a protein. Proteins carry out many jobs in cells and help determine traits. The central dogma links the genetic code in DNA to the molecules...

replication in eukaryotes

Eukaryotic DNA Copying at the Replication Fork

Eukaryotic DNA copying happens at replication forks, where the two DNA strands separate and new strands are built. This process lets a cell make an exact copy of its genetic material before it divides. The transcript explains that eukaryotic replication follows the same basic steps seen in other DNA replication systems, but it takes place in cells with a nucleus. The replication machinery works on each separated strand as a template, so the new DNA matches the original sequence. This topic is...

types of rna

RNA Types in Gene Expression

RNA types play different roles in gene expression. RNA, or ribonucleic acid, helps carry and use genetic information in cells. The main types discussed here are messenger RNA, ribosomal RNA, and transfer RNA. Messenger RNA, or mRNA, carries the genetic code from DNA to the ribosome. The ribosome is the site where proteins are made. Ribosomal RNA, or rRNA, is a key part of the ribosome itself. Transfer RNA, or tRNA, brings the correct amino acids to the ribosome during protein building. These...

transcription

Transcription and RNA Synthesis

Transcription is the process of making RNA from a DNA template. It is a key step in gene expression, because cells use the DNA sequence to build an RNA copy that can carry the message forward. During transcription, RNA polymerase binds to DNA and reads one strand as the template. The enzyme links RNA nucleotides together in the correct order to form a growing RNA molecule. This copying step does not make DNA; it produces RNA. The transcript focuses on the central idea of transcription as DNA...

translation

Translation: mRNA to Protein

Translation is the step in gene expression where ribosomes use messenger RNA, or mRNA, to build a protein. The mRNA sequence carries the instructions copied from DNA. During translation, those instructions are read in order so the cell can make a specific chain of amino acids. This process depends on the ribosome and transfer RNA, or tRNA. The ribosome reads the mRNA, and tRNA brings the matching amino acids. As the chain grows, the amino acids are linked together to form a polypeptide, which...

regulation of expression at multiple steps

regulation-of-expression-at-multiple-steps

How Cells Control Gene Expression

Cells control gene expression at several stages, from making RNA to building protein. These checkpoints include transcription, RNA processing, RNA localization, and translation. Together, they help decide when a gene is used and whether a protein is made. Transcription is controlled by regulatory proteins. Transcription factors, activators, and repressors can start or slow the transcription of genes. After transcription, the cell makes a precursor RNA, also called pre-mRNA. Pre-mRNA must be...

what is the cell cycle?

Cell Cycle Stages in Cell Growth

The cell cycle is the process that controls cell growth and division. It explains how one cell makes two new cells. This process helps cells grow and reproduce.

interphase

Interphase and Cell Growth

Interphase is the part of the cell cycle when a cell grows and prepares to divide. It is a major stage of the cell cycle, and it comes before cell division begins. During interphase, the cell carries out its normal functions. It also copies its DNA so each new cell can receive a full set of genetic material. The cell may also build up the materials it needs for division. Interphase is not a single step. It includes phases such as G1, S, and G2, which help the cell grow, copy DNA, and get...

mitosis and cytokinesis

Cell Division: Mitosis and Cytokinesis

Cell division depends on mitosis and cytokinesis. Mitosis is the stage when the cell’s nucleus divides and the copied chromosomes are separated into two sets. Cytokinesis is the step that follows and splits the cell into two daughter cells. These two processes work together to make sure each new cell receives genetic material and its own cytoplasm. Mitosis keeps the chromosome sets organized, while cytokinesis finishes the division of the whole cell. Together, they create two separate cells...

the cell cycle control system

The cell cycle is controlled by checkpoints that help a cell move from one phase to the next and begin mitosis. This control system uses internal regulatory molecules and outside signals to send stop or advance instructions. It makes sure each step is finished before the cell moves forward. Cyclins and cyclin-dependent kinases, or Cdks, are the main regulators of the cell cycle. They act during the G1, G2, and M phases. These regulators work at specific checkpoints to keep cell division...

molecular factors affecting cell division

molecular-factors-affecting-cell-division

Cell Cycle Regulators That Control Division

Cell division is controlled by outside signals and by internal cell cycle regulators. Nearby cell death can encourage division, and human growth hormone (hGH) can also promote it. In contrast, too little hGH or crowded cells can slow or stop division. Inside the cell, regulator molecules help each stage finish correctly before the next stage begins. Some regulators act directly on the cycle, while others affect the activity or production of other regulatory proteins. These molecules can either...

what is meiosis?

Meiosis and the Formation of Gametes

Meiosis is the cell division process that forms gametes, or sex cells. It reduces the chromosome number so offspring can inherit the correct amount of genetic material. This process includes two successive divisions. First, one cell divides, and then the resulting cells divide again. These steps separate the genetic material in a controlled way. Meiosis helps explain how sexual reproduction passes traits from one generation to the next. It is a key topic in high school biology because it...

overview of cell signaling

Cell Signaling Pathways and Responses

Cell signaling pathways and responses help cells communicate and react to changes. Cells send signals to one another, and those signals can trigger a specific response in the target cell. A signal usually begins when a signaling molecule reaches a cell with the right receptor, which is a protein that receives the message. The receptor helps the cell recognize the signal and start the communication process. Inside the cell, the message can move through a signaling pathway. This pathway passes...

types of signaling molecules

Chemical Messengers in Cell Signaling

Chemical messengers help cells communicate during signaling. These signaling molecules carry information from one cell to another and guide how cells respond. Some signaling molecules are gases, while others are proteins or peptides. Small lipids can also act as signals. In addition, cells may use steroids, amino acids, and even ions as signaling molecules. Each type of signaling molecule has different properties and works in a different way. Together, these molecules let cells send specific...

g protein-coupled receptors

G Protein-coupled Receptor Signaling

G protein-coupled receptors are a major class of cell-surface receptors. They help cells detect signals outside the cell and pass that information inward. These receptors are important in many kinds of cell communication. When a signal binds to a G protein-coupled receptor, the receptor changes shape. That change activates a G protein inside the cell. The activated G protein can then start a signaling pathway. This signaling system includes the receptor, the G protein, and the downstream...

cellular differentiation

From Stem Cell to Specialized Cells

Cellular differentiation turns unspecialized cells into specialized cells with specific jobs. This process helps a complex organism, such as a human, develop from a single fertilized egg into a body with many cell types. Nerve cells, muscle cells, and epithelial cells are examples of the final cell types that appear during development. A zygote is the first cell after fertilization. It is a totipotent stem cell, which means it has very high differentiation potential and can form all cell types...

key terms and concepts

Explore how cyclins, Cdks, and checkpoints regulate the cell cycle at G1, G2, and M phases to protect DNA and guide normal cell division.

Cell Cycle Checkpoints and Cyclin Control | JoVE K12

anatomy and physiology

JoVE Core Anatomy and Physiology showcases the anatomical and physiological details of the human body in comprehensive, clear, and engaging video animations. This collection of lessons focuses on the structures, components, functions, and requirements of the human body. It is complemented by scientist-in-action videos that demonstrate the application of this knowledge in real-world medical and research settings.

What is the Cell Cycle?

The cell cycle refers to the sequence of events occurring throughout a typical cell&#8217;s life. In eukaryotic cells, the somatic cell cycle has two ...

Interphase

The cell cycle occurs over approximately 24 hours (in a typical human cell) and in two distinct stages: interphase, which includes three phases of the ...

Mitosis and Cytokinesis

In eukaryotes, the cell division cycle is divided into distinct, coordinated cellular processes that include cell growth, DNA replication/chromosome ...

Positive Regulator Molecules

To consistently produce healthy cells, the cell cycle&mdash;the process that generates daughter cells&mdash;must be precisely regulated.

Internal ...

Negative Regulator Molecules

Positive regulators allow a cell to advance through cell cycle checkpoints. Negative regulators have an equally important role as they terminate a ...

Cancer

Cancers arise due to mutations in genes involved in the regulation of cell division, which leads to unrestricted cell proliferation. Modern science and ...

Replication in Prokaryotes

Overview

DNA replication has three main steps: initiation, elongation, and termination. Replication in prokaryotes begins when initiator proteins bind to ...

Replication in Eukaryotes

Overview

In eukaryotic cells, DNA replication is highly conserved and tightly regulated. Multiple linear chromosomes must be duplicated with high ...

Proofreading

Synthesis of new DNA molecules starts when DNA polymerase links nucleotides together in a sequence that is complementary to the template DNA strand. DNA ...

Mitogens and the Cell Cycle

Mitogens and their receptors play a crucial role in controlling the progression of the cell cycle. However, the loss of mitogenic control over cell ...

The cell cycle regulation directs how a cell proceeds from one phase to the next and begins mitosis. The cell cycle control system includes intracellular ...

Explain the importance of the cell cycle to the growth of organisms, including an overview of the stages of the cell cycle and deoxyribonucleic acid (DNA) replication models.

Cellular Differentiation

How does a complex organism such as a human develop from a single cell? It all starts from a single fertilized egg which gives rise to a vast array of ...

Cell Diversity

The concept of a cell started with microscopic observations of dead cork tissue by Robert Hooke in 1665. Hooke coined the term &#34;cell&#34; based on the ...

cells-coordinate-growth-and-proliferation

Cells Coordinate Growth and Proliferation

Cell size is a significant factor impacting cellular design, function, and fitness. There exists some internal coordination by which cells double their ...

an-introduction-to-molecular-developmental-biology

An Introduction to Molecular Developmental Biology

Molecular signals play a major role in the complex processes occurring during embryonic development. These signals regulate activities such as cell ...

An Introduction to Stem Cell Biology

Cells that can differentiate into a variety of cell types, known as stem cells, are at the center of one of the most exciting fields of science today. ...

iPS Cell Differentiation

The ability of induced pluripotent stem cells or iPSCs to differentiate into most body cell types has stimulated repair and regenerative medicine research ...

Embryonic Stem Cells

Embryonic stem (ES) cells were first discovered in mice in 1981 by Martin Evans. In 1998, James Thomson identified a method to isolate embryonic stem ...

Forced Transdifferentiation

Transdifferentiation, also known as lineage reprogramming, was first discovered by Selman and Kafatos in 1974 in silkmoths. They observed that the ...

Explain the process of cell specialization through cell differentiation, including the role of environmental factors.

BIO.6.B

Abnormal Proliferation

What is Cancer?

Cells and tissues must meticulously coordinate their activities&#160;for the normal functioning of the human body. Therefore, they exhibit socially ...

Adaptive Mechanisms in Cancer Cells

Cancer cells accumulate genetic changes at an abnormally rapid rate due to the defects in the DNA repair mechanisms. From an evolutionary perspective, ...

cancers-originate-from-somatic-mutations-in-a-single-cell

Cancers Originate from Somatic Mutations in a Single Cell

Cancer arises from mutations in the critical genes that allow healthy cells to escape cell cycle regulation and acquire the ability to proliferate ...

Relate disruptions of the cell cycle to how they lead to the development of diseases such as cancer.

BIO.6.C

Science concepts--biological structures, functions, and processes. The student knows how an organism grows and the importance of cell differentiation. The student is expected to:

Cell Cycle Checkpoints and Cyclin Control

Description

Transcript

Tags

More videos by Standards