20.4
Formazione di radicali: omolisi
Un legame si forma tra due atomi condividendo due elettroni. Quando questo legame viene rotto fornendo energia sufficiente, i due elettroni possono es…
Quando un'energia sufficiente rompe un legame e un atomo riceve entrambi gli elettroni, portando alla formazione di ioni, si parla di eterolisi.
In alternativa, quando gli elettroni sono distribuiti uniformemente come un elettrone di legame spaiato su entrambi gli atomi, generando radicali, si parla di omolisi.
L'energia fornita sotto forma di calore dalle alte temperature può omogeneizzare la maggior parte dei legami, mentre il calore un po' al di sopra della temperatura ambiente può omogeneizzare alcuni legami deboli. Ad esempio, il debole legame O-O nei perossidi subisce l'omolisi per riscaldamento per formare radicali alcossilici.
In alternativa, la luce di una lunghezza d'onda appropriata può omogeneizzare legami specifici.
I legami relativamente deboli nelle molecole di alogeno si omolizzano facilmente con il calore o la luce, dando luogo a radicali alogenuri.
View the full transcript and gain access to JoVE Core videos
Q1: What is the difference between homolysis and heterolysis?
Homolysis and heterolysis are two distinct bond cleavage mechanisms. In heterolysis, one atom receives both bonding electrons, forming ions—for example, HCl in solution cleaves into H+ and Cl−. In homolysis, the electron pair is shared equally between two atoms, with one electron on each, generating radicals. Both processes require sufficient energy, but homolysis produces neutral species with unpaired electrons.
Q2: How does temperature affect homolysis of chemical bonds?
Temperature is a primary energy source for homolysis. Most bonds undergo homolysis when heated to high temperatures, while weak bonds can homolyze at temperatures only slightly above room temperature. For instance, the weak O–O bond in peroxides undergoes homolysis on heating to form alkoxyl radicals, making peroxides useful as radical initiators in organic synthesis.
Q3: What role does light play in homolytic bond cleavage?
Light of appropriate wavelength can homolyze specific bonds, making it an alternative energy source to heat. This photochemical homolysis is particularly effective for weak bonds in halogen molecules, which easily break under light or heat to produce halide radicals. Light-induced homolysis is especially useful when thermal methods are impractical.
Q4: Why are peroxides and halogens readily homolyzed?
Peroxides and halogens contain relatively weak bonds that readily undergo homolysis with both heat and light. Dibenzoyl peroxide and azobisisobutyronitrile (AIBN) are commonly used as radical initiators because they easily homolyze to form radicals at moderate temperatures. Their weak bonds make them ideal for initiating radical reactions in organic synthesis.
Q5: What are radical initiators and how do they work?
Radical initiators are compounds that readily undergo homolysis to generate radicals, which then trigger radical chain reactions. Dibenzoyl peroxide and AIBN are frequently employed initiators because their weak bonds homolyze easily under mild heating. Once homolyzed, these initiators produce the initial radicals needed to begin radical anti-markovnikov addition to alkenes and other radical-based transformations.
Q6: How does homolysis differ from bond breaking in solution versus gas phase?
Bond cleavage mechanisms depend on the reaction environment. In solution, HCl typically undergoes heterolysis to form H+ and Cl− ions. However, at approximately 200 °C in the gas phase, the same H–Cl bond undergoes homolysis, with the electron pair shared between the two atoms. This demonstrates how conditions influence whether a bond cleaves homolytically or heterolytically.
Q7: Which bonds are most susceptible to homolytic cleavage?
Weak bonds are most susceptible to homolytic cleavage. The O–O bond in peroxides and bonds in halogen molecules are particularly prone to homolysis with modest heat or light. These weak bonds require less energy to break homolytically compared to strong bonds, making them ideal candidates for generating radicals in synthetic applications.