Tecniche voltammetriche: scansione lineare (E vs. tempo)

A dropping mercury electrode (DME) is a capillary tube filled with mercury that forms tiny droplets at its tip. Each droplet continuously drops from the capillary, creating a fresh electrode surface for each measurement. This constant renewal of the electrode surface ensures reproducible measurements and is fundamental to the polarographic technique.

A polarogram is a current-potential plot that reveals half-wave potential, residual current, limiting current, and diffusion current of an analyte. The diffusion current is directly proportional to analyte concentration, making polarograms valuable for quantitative analysis. This data helps identify and measure metal ions, inorganic anions, and organic compounds with easily reducible or oxidizable functional groups.

Hydrodynamic voltammetry uses a solid working electrode instead of a dropping mercury electrode, applying the same linear potential sweep as polarography. The resulting voltammograms resemble polarograms but lack current oscillations caused by mercury drop formation. This eliminates measurement noise while maintaining similar analytical capabilities for electrochemical analysis.

The linear potential sweep applied to the dropping mercury electrode causes electroactive species in solution to undergo reduction or oxidation reactions at specific potentials. As potential changes systematically over time, the resulting current variations create the polarogram. This controlled potential variation enables identification of analyte half-wave potentials and quantification based on diffusion current.

Polarography can analyze metal ions, inorganic anions, and organic compounds containing functional groups capable of easy reduction or oxidation. The technique measures current changes as electroactive species undergo redox reactions at the electrode surface. This versatility makes polarography applicable across analytical chemistry, environmental analysis, and electrochemical research.

Diffusion current, measured from a polarogram, is directly proportional to the concentration of analyte in solution. This linear relationship enables quantitative analysis: higher analyte concentrations produce larger diffusion currents. By measuring the diffusion current and comparing it to known standards, analysts can determine unknown analyte concentrations accurately.

A solid working electrode in hydrodynamic voltammetry eliminates current oscillations that occur in polarography due to mercury drop formation and detachment. This results in cleaner, more stable voltammograms without noise artifacts. The solid electrode maintains consistent surface properties throughout measurement, improving signal clarity and reproducibility.