3.3
Amplificatori operazionali in cascata
Gli amplificatori operazionali (amplificatori operazionali) sono componenti elettronici versatili che possono essere collegati tra loro in cascata, un…
Operational Amplifiers can be connected in a cascade - one after another in linear sequence without altering their input-output relationships due to their infinite input resistance and zero output resistance.
In a cascaded system, each amplifier is known as a stage, and the output of one amplifier drives the following amplifier.
The input signal is successively amplified by the gain of each stage, resulting in an overall larger gain equal to the product of each amplifier's gain.
The total gain is distributed among multiple stages, with each stage having less gain than if a single op amp was used. Since the gain-bandwith product remains constant for each op amp, this distribution increases the bandwidth for each stage, leading to an overall increase in bandwidth.
In television circuits, tuned RF amplifiers make use of cascaded op amps. They amplify weak signals and improve input and output impedance matching, delivering high-quality audio and video signals.
The cascaded op amp circuit should be designed such that the individual gains do not saturate the signal in the various stages of the cascade.
View the full transcript and gain access to JoVE Core videos
Q1: Why can operational amplifiers be connected in cascade without altering their input-output relationships?
Op-amps can be cascaded because they possess infinite input resistance and zero output resistance. These ideal characteristics allow each stage to maintain its input-output relationship regardless of how many amplifiers are connected in series. This impedance matching ensures the output of one stage drives the next without signal degradation or loading effects.
Q2: How is the overall gain calculated in a cascaded op-amp system?
The overall gain of a cascaded op-amp system equals the product of the individual gains of each stage. For example, if stage one has a gain of 10 and stage two has a gain of 5, the total gain is 50. This multiplicative relationship allows designers to achieve high total gains by distributing the amplification across multiple stages.
Q3: What is the relationship between gain distribution and bandwidth in cascaded amplifiers?
Since the gain-bandwidth product remains constant for each op-amp, distributing total gain among multiple stages increases the bandwidth at each stage. When individual stage gains are reduced, their bandwidths expand proportionally. This trade-off results in an overall increase in the cascaded system's bandwidth compared to using a single high-gain amplifier.
Q4: What are the practical applications of cascaded op-amps in television circuits?
Cascaded op-amps are used in tuned RF amplifiers within television circuits to amplify weak signals and improve impedance matching at input and output stages. This configuration delivers high-quality audio and video signals to viewers. The cascaded design balances gain and bandwidth requirements needed for reliable signal reception and processing.
Q5: What design consideration is critical when setting individual stage gains in a cascaded circuit?
Individual stage gains must be carefully set to prevent signal saturation at any point in the cascade. If gains are too high at early stages, the signal can saturate, causing distortion and poor performance throughout subsequent stages. Proper gain distribution ensures the signal remains within the linear operating range of each amplifier.
Q6: How does cascading op-amps compare to using a single amplifier with equivalent total gain?
Cascading multiple op-amps with distributed gains provides greater bandwidth than a single amplifier with the same total gain. While a single amplifier might saturate or have limited bandwidth, cascaded stages maintain linear operation and expanded frequency response. This makes cascaded designs superior for applications requiring both high gain and wide bandwidth.
Q7: What impedance characteristics enable cascaded op-amp configurations?
Op-amps feature infinite input resistance and zero output resistance, making them ideal for cascading. The infinite input impedance prevents loading effects on the previous stage, while zero output impedance ensures efficient signal transfer to the next stage. These characteristics of practical op amps allow seamless interconnection without signal loss or distortion between stages.