6.12
Circuiti Equivalenti di Thévenin
Il sistema di distribuzione elettrica domestica, che comprende linee di distribuzione e trasformatori, funge da rete primaria. Gli apparecchi elettric…
Il sistema di distribuzione dell'energia domestica, che comprende linee di distribuzione e trasformatori, può essere considerato la rete di origine.
All'interno della casa, vari apparecchi elettrici possono essere rappresentati come impedenze di carico.
Il teorema di Thévenin semplifica questo complesso sistema di distribuzione in un circuito equivalente di Thévenin.
Trovare il circuito equivalente di Thévenin richiede la conoscenza di due parametri: la tensione di Thévenin e l'impedenza di Thévenin.
Per comprendere il processo di determinazione, si consideri un circuito RLC semplificato collegato a una sorgente di tensione.
Per calcolare l'impedenza di Thévenin, sostituire la sorgente di tensione con un cortocircuito e determinare l'impedenza equivalente del circuito.
La tensione di Thévenin è uguale alla tensione a circuito aperto, equivalente alla caduta di tensione attraverso il ramo parallelo del circuito.
Inizialmente, viene calcolata la corrente che scorre attraverso la maglia chiusa del circuito. Quindi, utilizzando la legge di Ohm, viene determinata la caduta di tensione attraverso il ramo parallelo, che fornisce la tensione di Thévenin.
Se il circuito ha sorgenti che operano a frequenze diverse, il circuito equivalente di Thévenin e le impedenze del condensatore e dell'induttore devono essere determinate separatamente per ciascuna frequenza.
View the full transcript and gain access to JoVE Core videos
Q1: What is a Thévenin equivalent circuit and why is it useful?
A Thévenin equivalent circuit simplifies a complex network into a single voltage source in series with an impedance. This simplification is useful for analyzing household power distribution systems and other complex circuits. Replacing a portion of a circuit with its Thévenin equivalent does not alter the current or voltage of any element in the remaining circuit, making analysis more manageable.
Q2: What two parameters are needed to find a Thévenin equivalent circuit?
The Thévenin equivalent circuit requires the Thévenin voltage and Thévenin impedance. The Thévenin voltage equals the open circuit voltage across the terminals when no load is connected. The Thévenin impedance is the equivalent impedance seen from the terminals when all independent voltage sources are replaced with short circuits and all independent current sources are replaced with open circuits.
Q3: How do you calculate the Thévenin impedance in a circuit?
To calculate Thévenin impedance, replace all independent voltage sources with short circuits and all independent current sources with open circuits. Then determine the equivalent impedance of the resulting circuit by combining series or parallel impedances repeatedly until a single impedance value remains. This impedance represents the Thévenin impedance seen from the circuit terminals.
Q4: How is Thévenin voltage determined in an AC circuit?
Thévenin voltage is determined by calculating the open circuit voltage across the terminals. First, calculate the current flowing through the circuit using mesh analysis. Then apply Ohm's law to find the voltage drop across the parallel branch, which equals the Thévenin voltage. This represents the voltage that appears across the terminals when no load is connected.
Q5: Why must Thévenin equivalent circuits be determined separately for different frequencies?
When an AC circuit has sources operating at different frequencies, the impedances of capacitors and inductors vary with frequency. Since Thévenin impedance depends on these reactive element values, the equivalent circuit must be recalculated for each frequency. This ensures the Thévenin equivalent accurately represents the circuit behavior at each specific operating frequency.
Q6: How does Thévenin's theorem apply to household power distribution systems?
Household power distribution systems, including distribution lines and transformers, can be treated as a source network using Thévenin's theorem. Electrical appliances within the house are represented as load impedances. By converting the complex distribution system into a Thévenin equivalent circuit, engineers can simplify analysis of how voltage and current are delivered to household loads.
Q7: What is the relationship between Thévenin equivalent circuits and source transformation?
Thévenin equivalent circuits represent a network as a voltage source in series with impedance. This is one form of circuit representation that simplifies complex networks. Understanding how to derive and apply Thévenin equivalents complements broader circuit analysis techniques used to model and transform circuits for easier analysis and design.