Stress: condizioni generali di carico

Stress components are determined by passing a sectional plane through a point in a body and analyzing forces acting on that section. Normal forces and shearing forces are resolved into components parallel to coordinate axes. Each force component is then divided by the area to obtain stress values. This process yields three distinct stress components at any point when sections are passed parallel to different planes.

In stress notation, the first subscript indicates the plane on which the stress acts—specifically, the direction of the surface normal. The second subscript identifies the direction of the stress component itself. For example, τzy indicates shearing stress acting on a surface perpendicular to the z-axis, directed along the y-axis. This notation system clarifies both location and orientation of each stress component.

Normal forces act perpendicular to a sectional plane, typically along one axis. Shearing forces, however, lack a single well-defined direction on the sectional plane and must be resolved into two component forces parallel to the coordinate axes. This resolution allows shearing stresses to be calculated by dividing each component by the section area, yielding multiple shearing stress components at a point.

When analyzing opposite sides of a vertical plane through a point, Newton's third law applies: action and reaction forces are equal and opposite. Therefore, the stress components calculated on one side of the plane are identical in magnitude but opposite in direction on the other side. This symmetry reflects the equilibrium of forces within the body under load.

At any point in a three-dimensional body, nine stress components exist: three normal stresses (σx, σy, σz) and six shearing stresses (τxy, τyx, τxz, τzx, τyz, τzy). These components are determined by passing sectional planes parallel to the xy, yz, and zx planes through the point. Together, they fully describe the stress state at that location under general loading conditions.

The signs of stress components indicate the type of loading: positive values represent tension, where the material is being pulled apart, while negative values represent compression, where the material is being pushed together. This sign convention applies to both normal and shearing stress components, allowing engineers to quickly identify whether a region experiences tensile or compressive loading.

Analyzing sections parallel to different coordinate planes reveals the complete stress state at a point. By examining sections parallel to xy, yz, and zx planes, all nine stress components become defined. This comprehensive approach unravels the complex interplay of forces and stresses under intricate loading conditions, enabling accurate prediction of material behavior and structural failure.