27.1
Considerazioni sulla Progettazione della Linea di Trasmissione
L'alluminio è diventato il materiale di scelta per le linee di trasmissione aeree, superando il rame grazie alla sua abbondanza e convenienza. Il tipo…
L'alluminio, essendo abbondante ed economico, ha ampiamente sostituito il rame nelle linee di trasmissione aeree. Il popolare conduttore in alluminio rinforzato con acciaio è costituito da strati di trefoli di alluminio attorno a un nucleo in acciaio.
Altri tipi includono conduttori interamente in alluminio, interamente in lega di alluminio, conduttori in alluminio rinforzati con leghe e conduttori in acciaio rivestiti di alluminio. I conduttori in alluminio con supporto in acciaio e conduttori in alluminio ZT a fessura possono funzionare a temperature superiori a 150ºC. La progettazione elettrica per le linee di trasmissione considera il tipo di conduttore, le dimensioni, il numero di fasci per fase, la capacità termica, il controllo del gradiente di tensione, i dischi isolanti, il gioco e l'isolamento della linea. I fili di schermatura intercettano i fulmini e riducono la resistenza del basamento della torre.
Le linee di trasmissione che operano al di sopra dei 69 kV utilizzano isolanti del tipo a sospensione, tipicamente realizzati in porcellana, vetro temperato o dischi polimerici.
Le strutture che sostengono queste linee vanno dalle torri in acciaio a traliccio per le alte tensioni ai telai in legno per le tensioni più basse.
Il design meccanico garantisce stabilità, mentre le considerazioni ambientali tengono conto dell'uso del suolo e dell'impatto visivo.
View the full transcript and gain access to JoVE Core videos
Q1: Why has aluminum replaced copper in overhead transmission lines?
Aluminum has largely replaced copper due to its abundance and cost-effectiveness. The most common type is the steel-reinforced aluminum conductor (ACSR), which combines aluminum strands around a steel core for strength and conductivity. This design balances electrical performance with economic efficiency, making it the preferred choice for modern transmission systems.
Q2: What types of aluminum conductors are used in transmission line design?
Transmission lines use several aluminum conductor variants: all-aluminum conductors (AAC), all-aluminum alloy conductors (AAAC), aluminum conductor alloy-reinforced (ACAR), and aluminum-clad steel conductors. Advanced designs like gap-type ZT-aluminum conductors can operate above 150°C. Each type offers different thermal and mechanical properties suited to specific operating conditions and environmental requirements.
Q3: How do shield wires protect transmission lines from lightning?
Shield wires intercept lightning strikes before they reach the main conductors, reducing tower footing resistance and protecting the transmission line infrastructure. Made from high-strength steel or Alumoweld, these wires are strategically placed and properly grounded to safely dissipate electrical energy from lightning events, ensuring system reliability and safety.
Q4: What role do insulators play in transmission line electrical design?
Insulators provide electrical isolation between conductors and support structures. Transmission lines above 69 kV use suspension-type insulators made of porcelain, toughened glass, or polymer discs. Insulator discs ensure adequate insulation and voltage gradient control, minimizing energy losses while maintaining safety and preventing unwanted current paths to ground.
Q5: How do support structures differ based on transmission line voltage levels?
Support structures vary with voltage requirements. High-voltage transmission lines use self-supporting lattice steel towers that provide strength and stability for heavy conductor loads. Lower-voltage applications use wooden frames, which are more cost-effective. The mechanical design ensures structural durability while considering environmental factors like land use and visual impact.
Q6: What electrical factors must be considered when designing a transmission line?
Electrical design involves conductor type and size, bundle number per phase, and thermal capacity. Voltage gradient control is essential for minimizing energy losses. Proper clearance and line insulation prevent safety hazards. Designers must balance technical performance with installation costs and operational losses to achieve an optimal line design meeting all criteria.
Q7: Why is thermal capacity important in transmission line conductor selection?
Thermal capacity determines how much current a conductor can safely carry without overheating. Advanced aluminum conductors with steel support and gap-type ZT-aluminum designs can operate above 150°C, allowing higher power transmission. Selecting conductors with appropriate thermal ratings ensures reliable operation under peak demand while preventing insulation degradation and mechanical failure.