1.11
Coprire le aperture nei muri in mattoni
Nella costruzione di muri in mattoni, le strutture di supporto sono fondamentali per le aperture come finestre e porte per mantenere l'integrità e sos…
Quando si costruiscono muri in mattoni, le aperture per finestre e porte devono essere supportate con architravi, mensole e archi per resistere ai carichi del muro sovrastante.
Gli architravi possono essere realizzati in cemento armato o angoli in acciaio e sono semplici da installare. Gli architravi sono solitamente nascosti nei muri di mattoni.
Le mensole hanno una capacità di campata limitata e sono utilizzate al meglio per piccole aperture o ornamenti, a volte come staffa di supporto della trave.
Gli archi in mattoni sono una forma strutturale potente e ampiamente utilizzata, ma la loro costruzione richiede precisione. È necessario un centraggio del legno o dell'acciaio e la costruzione dei pennacchi può richiedere molto tempo.
Gli archi in mattoni calibrati richiedono che ogni mattone venga strofinato alla forma del cuneo necessario, rendendoli costosi da costruire. Gli archi grezzi dipendono da giunti di malta a forma di cuneo per la loro curvatura.
I produttori di mattoni possono produrre su misura mattoni affusolati per archi su misura per qualsiasi forma e campata specifica.
Quando l'arco viene spostato perpendicolarmente al suo piano, si ottiene una volta a botte e quando lo stesso arco viene ruotato attorno alla sua linea centrale verticale, forma una cupola.
View the full transcript and gain access to JoVE Core videos
Q1: What materials are used to make lintels for brick wall openings?
Lintels are typically made from reinforced concrete, steel angles, or steel-reinforced brick masonry. These materials provide the strength needed to support loads from the wall above openings. Lintels are straightforward to install and are usually hidden within the brickwork, making them invisible in the completed structure.
Q2: How do corbels differ from lintels in spanning openings?
Corbels offer limited spanning capability compared to lintels and are best suited for small openings or decorative purposes. They function as supporting brackets for beams, adding both functional and aesthetic value. Lintels, by contrast, are primary supports designed to span larger openings and carry substantial loads from the wall above.
Q3: What is the difference between gauged and rough brick arches?
Gauged brick arches require each brick to be individually rubbed to a wedge shape, making them expensive to construct but architecturally refined. Rough arches depend on wedge-shaped mortar joints to form their curvature, reducing labor costs. Both methods create powerful structural forms, though gauged arches demand greater precision and craftsmanship.
Q4: Why is centering needed when constructing brick arches?
Centering is a temporary wooden or steel framework that supports the arch structure during construction. It holds the bricks and mortar in place until the arch becomes self-supporting and gains sufficient strength. Once the arch is complete and cured, the centering is removed, leaving the arch to carry loads independently.
Q5: How can manufacturers customize arches for specific architectural requirements?
Brick manufacturers can custom-produce tapered bricks specifically designed for arches, accommodating various shapes and spans. These tapered bricks allow architects to create arches tailored to unique structural and aesthetic needs without requiring extensive on-site shaping or rubbing of individual bricks.
Q6: What architectural forms result from modifying the basic arch structure?
When an arch is extended perpendicularly to its plane, it creates a barrel vault. When the same arch is rotated about its vertical centerline, it forms a dome. These three-dimensional adaptations maintain the arch's structural efficiency while creating complex architectural spaces.
Q7: Why do brick arches require more precision in construction than lintels?
Brick arches demand precise construction because their structural integrity depends on accurate brick placement, proper wedge-shaped joints, and correct centering support. Unlike lintels, which are prefabricated units simply installed in place, arches must be built piece-by-piece with exact geometry to distribute loads effectively across the curved form.