2.5
Pareti in muratura post-tese
Le pareti in muratura post-tese utilizzano barre di acciaio ad alta resistenza o tendini flessibili per migliorare la resistenza e l'efficienza delle…
pareti in muratura post-tesa sono costruite utilizzando barre filettate in acciaio ad alta resistenza o tiranti flessibili che vengono ancorati alla fondazione ed estesi verticalmente all'interno dei nuclei delle unità in muratura o tra due telai in muratura.
Una volta completata la costruzione del muro e indurita la malta, i tendini vengono tensionati mediante tensionamento molto stretto utilizzando speciali martinetti idraulici. Vengono poi ancorati tramite mandrini in acciaio che afferrano i fili del tendine.
Invece, le barre filettate vengono tese serrando i dadi contro le piastre di acciaio installate sulla parte superiore del muro.
Questo tensionamento induce una significativa precompressione verticale a compressione nella parete, che è molto più elevata delle sollecitazioni dovute al peso proprio della parete e ai carichi esterni che agiscono sulla parete.
Questa precompressione di compressione sviluppata nella parete ne aumenta la resistenza alle forze di trazione derivanti dal vento e dai carichi sismici.
Di conseguenza, le pareti in muratura post-tesa consentono la costruzione di pareti in muratura più sottili rispetto alle tradizionali pareti in muratura armata, contribuendo ad aumentare lo spazio interno della stanza.
View the full transcript and gain access to JoVE Core videos
Q1: What are the main components used in post-tensioned masonry walls?
Post-tensioned masonry walls use high-strength steel rods or flexible tendons anchored to the foundation and extended vertically within masonry unit cores or between wythes. Steel rods are tensioned by tightening nuts against steel plates at the wall top, while flexible tendons are stretched using hydraulic jacks and anchored with steel chucks gripping the tendon wires.
Q2: How does tensioning create compressive prestress in masonry walls?
After mortar cures, tendons are stretched tightly using hydraulic jacks or by tightening nuts against steel plates. This tensioning induces significant vertical compressive prestress throughout the wall, far exceeding stresses from self-weight and external loads. This prestress enhances the wall's ability to resist tensile forces from environmental factors.
Q3: Why do post-tensioned masonry walls resist wind and seismic loads better?
The vertical compressive prestress developed during tensioning strengthens the wall's resistance to tensile forces caused by wind and seismic activity. This enhanced strength allows walls to withstand lateral loads more effectively than conventional reinforced masonry, improving structural performance during environmental stresses.
Q4: What are the construction advantages of using post-tensioned masonry?
Post-tensioned masonry enables construction of thinner walls with fewer grouted cores compared to conventional reinforced masonry. This design conserves materials, reduces labor costs, and increases interior room space. The technique provides a cost-effective and structurally advantageous option for modern construction projects.
Q5: When does the tensioning process occur during wall construction?
Tensioning occurs after wall construction is complete and mortar has fully cured. The tendons are then stretched tightly using hydraulic jacks or by tightening nuts, depending on whether flexible tendons or threaded rods are used. This timing ensures the mortar provides adequate strength before prestress is applied.
Q6: How do threaded rods differ from flexible tendons in post-tensioning?
Threaded rods are tensioned by tightening nuts against steel plates installed on the wall top. Flexible tendons are stretched using specialized hydraulic jacks and then anchored with steel chucks that grip the tendon wires. Both methods achieve vertical compressive prestress, but use different anchoring mechanisms.
Q7: What role does mortar curing play in post-tensioned masonry construction?
Mortar must fully cure before tensioning begins to ensure the wall has adequate strength to support the compressive prestress. The curing period allows the mortar to develop sufficient bond between units and provide a stable base for the tensioning process. This sequence is critical for proper wall performance.