2.12
Deterioramento dei giunti di malta nelle pareti in muratura
Il deterioramento dei giunti di malta è un problema significativo nelle strutture in muratura, con l'accumulo di acqua nei giunti che comporta a danni…
Un muro in muratura, se esposto all'acqua piovana, spesso raccoglie l'acqua nelle fughe riempite di malta del muro.
L'acqua raccolta nei giunti, sottoposta a ripetute dilatazioni per congelamento e successiva fusione per disgelo, sviluppa fessurazioni nella malta che legano i gruppi murari.
Alla fine, la malta nei giunti si spacca e si sfalda, allentando le unità di muratura e creando percorsi per l'acqua che penetra nel muro attraverso i giunti.
Ciò viene evitato riempiendo accuratamente i giunti della muratura con malta resistente all'acqua e compattandola ermeticamente durante la posa della muratura.
Le pareti in muratura esposte a condizioni climatiche severe possono subire un notevole deterioramento dei giunti di malta.
In tali condizioni, viene eseguita la ripuntatura, che comporta la rastrellatura e il taglio della malta deteriorata a una profondità uniforme.
Segue la rimozione dei detriti nelle fughe e la bagnatura dell'area da riappuntire.
Infine, il giunto viene riempito con malta fresca, che viene poi rifinita con un attrezzo per giunti, che lo rende resistente alla penetrazione dell'acqua.
View the full transcript and gain access to JoVE Core videos
Q1: What causes mortar joints in masonry walls to crack and deteriorate?
Water collected in mortar joints undergoes repeated expansion and contraction during freeze-thaw cycles. When water freezes, it expands, creating internal pressure that develops cracks in the mortar. Upon thawing, the water melts and the mortar contracts. This cycle eventually causes the mortar to split and flake off, loosening masonry units and creating pathways for water penetration.
Q2: How does water accumulation in masonry joints lead to structural damage?
Water accumulation in mortar joints causes spalling, where deteriorated mortar flakes off and loosens the masonry units. This weakens the structural integrity of the wall and creates openings for moisture intrusion. The repeated freeze-thaw cycles accelerate this deterioration, making the wall vulnerable to water penetration and further damage over time.
Q3: What preventive measures can protect mortar joints from deterioration?
Using weather-resistant mortar and ensuring thorough filling and compaction of joints during bricklaying prevents water accumulation and reduces deterioration. Proper compaction eliminates air voids where water can collect. In severe climates, even with these preventive measures, masonry in cold and hot weather conditions may still experience considerable joint deterioration over time.
Q4: What is the repointing process for deteriorated mortar joints?
Repointing involves raking and cutting out deteriorated mortar to a uniform depth, then removing debris from the joints. The area is wetted before filling with fresh mortar. Finally, a joint tool finishes the surface, making it resistant to water penetration. This process restores the structural integrity and weatherproofing of the masonry wall.
Q5: How does surface grouting differ from repointing in masonry repair?
Surface grouting is applied to hairline cracks in mortar joints to preserve the wall's structural integrity and appearance without extensive removal of mortar. Unlike repointing, which involves cutting out and replacing deteriorated mortar, surface grouting is a less invasive treatment for minor cracks that addresses moisture intrusion while maintaining the existing joint structure.
Q6: Why is proper mortar compaction critical during masonry construction?
Thorough compaction of water-resistant mortar during bricklaying eliminates air voids and ensures tight joints. This prevents water accumulation in the joints and reduces the risk of freeze-thaw damage. Well-compacted mortar creates a denser barrier that resists water penetration and significantly extends the service life of the masonry wall.
Q7: What role does cavity drainage and flashings play in preventing mortar joint damage?
Cavity drainage and flashings in masonry walls direct water away from the mortar joints, reducing water accumulation that triggers freeze-thaw deterioration. By managing moisture flow through the wall assembly, these systems protect mortar joints from repeated wetting and drying cycles, preserving joint integrity and preventing spalling and loosening of masonry units.