Name: ir spectroscopy: vibration types and bands
Uploaded: 2024-12-05T18:32:08.000Z
Duration: 1 min 24 s
Channel: JoVE

IR活性分子は、IR吸収をもたらす2つの基本的な振動モードを示します。
伸張振動はボンドラインに沿って発生し、ボンドの長さを変更することができます。ストレッチは、対称または非対称にすることができます。
曲げ振動はボンディング角度を変化させ、面内モードと面外モードに細分化されます。はさみと揺れは前者を表し、振ることとねじれは後者を表します。
n個の原子を含むエタノールのような非線形分子に許容される基本振動の総数は3n − 6であるが、HClのような線形分子に対して許容される基本振動は3n − 5である。
ボンドの伸張振動と曲げ振動は、特徴的な基本吸収周波数で発生し、基底状態から最も低いエネルギー励起状態へのボンドの励起を伴います。
基本吸収周波数の整数倍は、倍音と呼ばれます。
2つのIRアクティブ振動周波数の融合により、コンビネーションバンドが生成されます。
基本バンドと倍音バンドまたは組み合わせバンドとの相互作用によって生成される結合振動は、フェルミ共鳴を生成します。

ir 分光法: 分子振動 - 概要

IR Spectroscopy: Molecular Vibration Overview

赤外線 (IR) 放射が共有結合分子を通過すると、結合は低振動レベルから高振動レベルに移行します。赤外線吸収をもたらす基本的な振動運動は、伸縮振動または曲げ振動に分類できます。

伸縮振動は、結合線に沿って発生する振動運動で、結合長または 2 つの結合原子間の距離を変更します。さらに、対称または非対称として区別されます。対称伸縮では、2 つの結合が同時に振動し、一緒に伸び縮みします。対照的に、非対称伸縮では、1 つの結合が一方向に動き、もう 1 つの結合が反対方向に動きます。

伸縮とは異なり、曲げ振動は結合線に沿って発生せず、代わりに結合角度を変更します。曲げ振動は、面内曲げと面外曲げに分けられます。面内曲げ振動は、シザリング（対称）とロッキング（非対称）に分類され、面外曲げは、ツイスト（対称）とワギング（非対称）に分類されます。

非線形分子の場合、許容される基本振動の総数は、3n − 6 という式で与えられます。ここで、n は原子の数を表します。対照的に、HBr のような線形分子では、3n − 5 の基本振動しか許容されません。HBr の場合、1 種類の振動のみが可能です。

IR 分光法では、基底状態から最低エネルギー励起状態への結合の励起に対応する周波数は、基本吸収周波数と呼ばれます。基本吸収周波数の整数倍は倍音と呼ばれます。物理的な振動は分子内で倍音を生成します。2 つの振動周波数の融合によって生成される、IR 活性のバンドは、結合バンドと呼ばれます。比較すると、2 つのバンドの差から生じるバンドは、差バンドと呼ばれます。さらに、フェルミ共鳴とは、基本バンドと倍音または結合バンドとの相互作用によって生成される結合振動を指します。

IR 分光法: 分子振動 - 概要

赤外線(IR)放射が共有結合分子を通過すると、結合は低い振動レベルから高い振動レベルに移行します。基本的な...

ir-spectroscopy-molecular-vibration-overview

Education

JoVE Core

Analytical Chemistry

分析化学

Unit 1

ユニット1

Molecular Vibrational Spectroscopy

分子振動分光法

KEY TERMS AND CONCEPTS

重要な用語と概念

ir spectroscopy: vibration types and bands

IR spectroscopy explains how covalently bonded molecules absorb infrared radiation by moving to higher vibrational levels. The key motions are stretching and bending vibrations. These motions help describe how a bond responds when it absorbs IR energy.

Stretching vibrations happen along the bond line and change the distance between two bonded atoms. They can be symmetric, where two bonds lengthen and shorten together, or asymmetric, where one bond moves one way while another moves the opposite way. Bending vibrations do not occur along the bond line. Instead, they change the bond angle.

Bending vibrations are grouped into in-plane and out-of-plane motion. In-plane bending includes scissoring, which is symmetric, and rocking, which is asymmetric. Out-of-plane bending includes twisting, which is symmetric, and wagging, which is asymmetric.

The number of allowed fundamental vibrations depends on molecular shape. Nonlinear molecules have 3n − 6 fundamental vibrations, where n is the number of atoms. Linear molecules such as HBr have 3n − 5 fundamental vibrations, and HBr has only one possible vibration.

IR spectroscopy also uses terms for vibrational bands. The lowest-energy transition from the ground state is called the fundamental absorption frequency. Integral multiples of that frequency are overtones. A band formed by the fusion of two vibrational frequencies is a combination band, while a band from their difference is a difference band. Fermi resonance is the coupled vibration that occurs when a fundamental band interacts with an overtone or combination band.

IR Spectroscopy: Vibration Types and Bands

ir-spectroscopy-vibration-types-and-bands

infrared (ir) spectroscopy: overview

IR Spectra and Functional Group ID

Infrared (IR) spectroscopy helps identify functional groups in molecules by measuring how they absorb infrared light. It is based on the idea that electromagnetic radiation can move atoms or molecules from a lower energy state to a higher one when the radiation matches the energy gap between those states. In IR spectroscopy, that absorption happens as molecular vibrations change.

ir spectroscopy: molecular vibration overview

IR spectroscopy explains how covalently bonded molecules absorb infrared radiation by moving to higher vibrational levels. The key motions are stretching and bending vibrations. These motions help describe how a bond responds when it absorbs IR energy. Stretching vibrations happen along the bond line and change the distance between two bonded atoms. They can be symmetric, where two bonds lengthen and shorten together, or asymmetric, where one bond moves one way while another moves the opposite...

ir spectroscopy: hooke's law approximation of molecular vibration

ir-spectroscopy-hooke-s-law-approximation-of-molecular-vibration

Molecular Bond Vibrations in IR Spectroscopy

Molecular bond vibrations can be modeled with IR spectroscopy using Hooke’s law. A covalently bonded heteronuclear diatomic molecule is treated like two masses connected by a spring. The atoms act like the masses, and the bond acts like the spring. Hooke’s law links the vibrational frequency to two main factors. The frequency increases with the force constant, K, which describes bond stiffness. It decreases with the reduced mass, μ, which combines the masses of both atoms into one value for...

ir spectrometers

IR Spectrometer Signal Paths

IR spectrometers use infrared light to compare a sample beam with a reference beam and record how each one behaves. The two main instruments are dispersive IR spectrometers and Fourier transform infrared, or FTIR, spectrometers. In a dispersive IR spectrometer, a hot wire produces the infrared beam. Mirrors split it into two equal beams. One beam passes through the sample, and the other serves as the reference. The beams then move into the monochromator, which separates the radiation into a...

ir spectrum

IR Spectrum Peak Regions and Patterns

Infrared (IR) spectroscopy shows how a molecule responds when IR radiation passes through it. The bonds in the molecule stretch or bend as they absorb that energy. This creates an absorption spectrum, which plots percent transmittance against wavenumber. Transmittance is the ratio of radiant power that passes through a sample to the radiant power from the source. When transmittance is multiplied by 100, it becomes percent transmittance, or %T. %T ranges from 100% for no absorption to 0% for...

ir absorption frequency: hybridization

C-H Stretching in Alkane, Alkene, and Alkyne IR

Hydrocarbons such as alkanes, alkenes, and alkynes show characteristic C–H stretching bands in infrared, or IR, spectra. These bands help identify how the carbon atoms are hybridized. The bond type affects the stretching frequency that appears in the spectrum. The difference comes from s character, which is the amount of s-orbital contribution in a hybrid orbital. Among sp, sp2, and sp3 hybridized orbitals, sp has the most s character at 50%. Because of that, the electrons are held closer to...

ir absorption frequency: delocalization

Conjugation Shifts IR Bond Stretching

Conjugation shifts IR bond stretching because electron delocalization changes bond strength. Electron delocalization means electrons spread across more than one atom instead of staying in one bond or one atom. It is common in conjugated systems, where alternating single and double bonds let pi-electrons move through the molecule. This electron movement helps stabilize the molecule. It also lowers the double bond character of the bonds in the conjugated network. When a bond has less double bond...

ir frequency region: x&ndash;h stretching

IR Peaks for C-H, O-H, and N-H Bonds

IR spectroscopy shows the stretching bands of C-H, O-H, and N-H bonds in the 2700-4000 cm-1 range. These X-H bonds are useful for identifying common functional groups in a spectrum. Their peaks appear in different parts of this region and often have different shapes and strengths. C-H stretching gives sharp bands in the 2850-3000 cm-1 range. O-H stretching appears in the 3650-3200 cm-1 range, and N-H stretching appears in the 3500-3100 cm-1 range. N-H stretching usually shows one or two sharp...

ir frequency region: alkyne and nitrile stretching

ir-frequency-region-alkyne-and-nitrile-stretching

Triple-Bond Signals in IR Spectra

Alkyne and nitrile groups both contain triple bonds, and they show clear stretching bands in the diagnostic IR region. These absorptions usually appear around 2100 to 2300 cm −1 . This makes them useful markers when reading an IR spectrum. Triple bonds absorb at a higher stretching frequency than double bonds and single bonds. The C≡C bond stretches at a higher frequency than a C=C or C–C bond. The C≡N bond also stretches at a higher absorption than C=N and C–N bonds. This higher stretching...

ir frequency region: alkene and carbonyl stretching

ir-frequency-region-alkene-and-carbonyl-stretching

IR Signals for C=C and C=O Bonds

IR spectroscopy helps identify alkene double bonds and carbonyl groups by their stretching signals. These bonds absorb in a diagnostic region of the IR spectrum. Alkenes also show vinylic C–H stretching and C–H out-of-plane bending bands. Those bands can help determine substitution patterns on the double bond. The exact stretching frequency can change with bond environment. Resonance, inductive effects, ring strain, dipole moment, and hydrogen bonding can all shift the absorption. That is why...

ir frequency region: fingerprint region

IR Spectra: Diagnostic vs Fingerprint Region

IR spectra are divided into a diagnostic region and a fingerprint region. The diagnostic region lies above 1500 cm −1 and appears on the left side of the spectrum. It shows key bond stretches that help identify functional groups. In this region, single-bond vibrations from N-H, C-H, and O-H stretches appear at higher wavenumbers. The C≡C and C≡N stretches occur between 2100 and 2300 cm −1. The C=O, C=N, and C=C stretches appear between 1600 and 1850 cm −1. The fingerprint region lies below...

ir spectrum peak intensity: amount of ir-active bonds

ir-spectrum-peak-intensity-amount-of-ir-active-bonds

IR Peak Intensity and Bond Dipole Change

IR peak intensity depends on how much a bond’s dipole moment changes during vibration. When infrared light passes through a molecule, absorption happens only when a stretching or bending motion causes a substantial change in that bond dipole moment. That is what makes a molecule infrared active. Vibrational transitions usually fall in the infrared region from 4000 to 400 cm-1. Molecular bonds can stretch and bend in different ways, so an IR spectrum shows peaks with different intensities. The...

ir spectrum peak intensity: dipole moment

IR Absorption and Bond Dipole Changes

IR absorption depends on whether a bond has a changing dipole moment. A dipole moment comes from partial charge on each atom and the distance between them. It helps determine how strongly a bond absorbs infrared light and how intense the peak looks. A bond in an electric field can be stretched or compressed depending on the field direction. Infrared radiation has an electric field that flips direction very quickly. So polar bonds are pulled back and forth as the field reverses. If this motion...

ir spectrum peak broadening: hydrogen bonding

ir-spectrum-peak-broadening-hydrogen-bonding

Hydrogen Bonding Effects in IR O-H Peaks

Hydrogen bonding changes the O-H stretching peak in IR spectroscopy. The bond’s vibrational frequency depends on bond strength. Stronger bonds vibrate at higher frequencies, while weaker bonds vibrate at lower frequencies. In very dilute alcohol or phenol samples, or in the gas phase, the strong O-H bond gives a sharp peak at 3600-3650 cm−1. When intermolecular hydrogen bonding or intramolecular hydrogen bonding weakens the O-H bond, the stretch shifts to about 3300-3400 cm−1. This range of...

ir spectrum peak splitting: symmetric vs asymmetric vibrations

ir-spectrum-peak-splitting-symmetric-vs-asymmetric-vibrations

IR Peak Splitting in Amines and Nitro Groups

IR peak splitting can reveal how identical bonds in a polyatomic group are moving. These bonds may stretch in phase, which is symmetric stretching, or out of phase, which is asymmetric stretching. The two motions often create different IR peak shapes and positions. As a general rule, asymmetric stretching appears at a higher frequency than symmetric stretching. This pattern is useful for spotting functional groups in an IR spectrum. It also helps explain why some groups show one peak while...

applications of ir spectroscopy: overview

IR Spectroscopy Uses in Science and Forensics

IR spectroscopy is a useful tool for finding out what materials are made of. It is non-destructive, so the sample can often be kept intact. It gives chemical information about functional groups and the bonds between atoms in a molecule. This makes IR spectroscopy helpful in organic synthesis, pharmaceutical research, and materials science. Scientists use it to identify and characterize organic and inorganic compounds. It also helps with structural elucidation, which means working out a...

attenuated total reflectance (atr) infrared spectroscopy: overview

attenuated-total-reflectance-atr-infrared-spectroscopy-overview

ATR Infrared Spectroscopy for Material ID

ATR infrared spectroscopy is a method for identifying the composition of materials. It is used in chemistry, materials science, forensic science, and other areas where sample characterization is needed. The technique is useful because it usually needs little to no sample preparation and can be applied to many kinds of samples. The process starts when infrared, or IR, radiation is directed onto a diamond or germanium crystal. Because this crystal has a high refractive index, the IR beam...

raman spectroscopy: overview

Raman Spectra and Molecular Fingerprints

Raman spectroscopy uses laser light to study how molecules scatter light and reveal their vibrational energy levels. A monochromatic beam, or single-color light, hits the sample first. Most of the scattered light keeps the same frequency as the incoming light. This is called Rayleigh scattering. A small part of the light shifts in frequency because the photons exchange energy with molecular vibrations. That shifted light is Raman scattering. To collect a Raman spectrum, the sample is...

raman spectroscopy instrumentation: overview

raman-spectroscopy-instrumentation-overview

Raman Spectroscopy Setup and Detectors

Raman spectroscopy uses a laser, a sample holder, a wavelength selector, and a detector to measure scattered light from a sample. The laser is monochromatic, meaning it has one main wavelength. It usually uses visible or near-infrared light to create a tightly focused beam. That beam hits the sample and some of the light scatters. Liquid and gas samples are often placed in ordinary glass capillaries. Solid samples can be tested as powders packed into capillaries or as potassium bromide pellets.

key terms and concepts

Learn how IR spectroscopy identifies stretching and bending vibrations, fundamental frequencies, overtones, combination bands, and Fermi resonance.

IR Spectroscopy: Vibration Types and Bands | JoVE K12

JoVE Core 分析化学 は、複雑な化学原理をアニメーションで視覚化することで、SI 単位から NMR 分光法を含むトピックをよりわかりやすくします。実験を撮影した実写動画では、これらの概念が世界中の研究所でどのように応用されているかを取り上げています。

analytical chemistry

IR Spectroscopy: Vibration Types and Bands

Description

Transcript