Name: si units and metric prefixes
Uploaded: 2023-09-22T11:49:19.000Z
Duration: 1 min 29 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Specialised Topic in Science

112.51.c.1.

112.51.c.1.E.

International System of Units

国際的な単位系は世界中で広く受け入れられており、基本単位はメートル、キログラム、秒です。これらの単位は絶対単位であり、その値は場所に基づいて変化しません。
プレフィックスは、より大きな量と小さい量を定義するために使用されます。ミリ、マイクロ、ナノは少量を表すために使用され、キロ、メガ、ギガは大量を指すために使用されます。
ただし、基本単位の中で、キログラムは接頭辞で定義された唯一の基本単位です。
単位と接頭辞を表現する際には、いくつかのルールに従う必要があります。まず、ドットは複合ユニットのユニットを区別するために使用されます。
次に、接頭辞は分母で避けられ、複合単位の分子でのみ表されます。
第三に、プレフィックスを持つユニットの指数関数的なパワーは、プレフィックスとそのユニットに適用され、最後に、結果は単一のプレフィックスを使用して表されます。
メートル法とは異なり、SIはデカまたはセンチの倍数を使用しません。

<ol>
	<li>ヒベラー、RC(2016)。エンジニアリングメカニクス \u2012 静力学と力学。 ニュージャージー州ホーボーケン:ピアソンプレンティスホール。9ページ\u201210</li>
	<li>ビール、FP;ジョンストン、ER;マズレック、D.F;クロムウェル、PJおよびセルフ、BP(2019)。エンジニアのためのベクトル力学 \u2012 静力学と動力学。ニューヨーク:マグロウヒル。5 ページと 7</li> ページ
	<li>メリアム、J.L.;Kraige、LGおよびBolton、JN(2020)。エンジニアリングメカニクス \u2012 静力学。ニュージャージー州ホーボーケン:ジョン・ワイリー。7 ページと 8 ページ</li>
</ol>

国際単位系

国際単位系（SI）は、世界的に受け入れられ、世界中で認識され、使用されている普遍的な計量系です。SI系は、3つの絶対的な基本単位に基づいており、その値は場所によって変化しません。これらの基本単位はメートル、キログラム、秒です。

SI系では、接頭辞を使用して、より大きな単位や小さな単位を表します。たとえば、ミリ、マイクロ、ナノはより小さな量を定義し、キロ、メガ、ギガはより大きな量を定義するために使用されます。キログラムは、SI系の基本単位の中で唯一、接頭辞を伴って定義されています。

単位と接頭辞を表す際には、いくつかのルールに従う必要があります。まず第一に、ドットは合成単位を区別するために使用されます。第二に、分母では接頭辞は避けられ、合成単位の分子のみで表されます。第三に、接頭辞を含む単位の指数は、接頭辞とその単位に適用されます。最後に、結果は単一の接頭辞で表されます。

メートル法とは異なり、SI系はデカやセンチの倍数を使用しません。SI系の接頭辞は、10の累乗を基にしており、基本単位には接頭辞がありません。SI単位は、普遍的なシステムを利用して科学的な計測を簡素化し、標準化することを意図しています。

SI系が世界中で使用される主な理由の一つは、その測定の正確さと精度です。最も微細な量から最も巨大な量まで、基本単位と接頭辞を使用して正確に定量化することができます。

SI系の長さの基本単位はメートルであり、真空中を光が移動する距離で定義されています。その他の長さの測定、例えばセンチメートル、キロメートル、ミリメートルは、接頭辞のシステムを使用してメートルから導出することができます。

SI系の質量の基本単位はキログラムであり、国際キログラム原器として知られる一連の基礎的な物体の質量と定義されています。その他の質量の測定、例えばグラムやミリグラムは、接頭辞のシステムを使用してキログラムから導出することができます。

SI系の時間の基本単位は秒であり、セシウム133原子の基底状態における2つのエネルギー準位間の遷移に対応する放射線が9,192,631,770回振動する時間として定義されています。秒からは、分や時間などの他の時間の測定が接頭辞のシステムを使用して導出されます。

これらの単位に加えて、アンペア、ケルビン、モル、カンデラの4つが計量の基本単位として定義されています。

SIシステムとして知られる国際単位系は、世界中で認められ、使用されている広く受け入れられている測定システムです。SIシステムは...

Education

JoVE Core

Mechanical Engineering

機械工学

Unit 1

ユニット1

An Introduction to Statics

静力学入門

KEY TERMS AND CONCEPTS

主要用語と概念

si units and metric prefixes

SI units and metric prefixes provide a standard way to measure size, mass, and time. The International System of Units, or SI system, is used worldwide because it gives scientists a common language for measurement. Its values do not change with location, which helps keep results consistent.

The SI system is built on three base units: meter, kilogram, and second. These are the core units for length, mass, and time. The kilogram is the only base unit that already includes a prefix.

Prefixes make it easy to express very large or very small values. Milli, micro, and nano represent smaller quantities. Kilo, mega, and giga represent larger quantities. SI prefixes are based on powers of ten, and the base unit has no prefix.

Several rules apply when writing SI units. Dots are used to separate units in composite units. A prefix should not appear in the denominator, only in the numerator. If a unit with a prefix is raised to a power, the power applies to both the prefix and the unit. The final answer should use just one prefix. Unlike the metric system, SI does not use deca or centi.

SI units help simplify and standardize scientific measurements. They also improve accuracy and precision, even for very small or very large quantities. The meter is defined as the distance light travels in a vacuum during a specific time frame. Other length units, such as centimeter, kilometer, and millimeter, come from the meter.

The kilogram is the SI base unit of mass. It was defined as the mass of a set of foundational objects called the International Prototype of the Kilogram. Grams and milligrams are derived from the kilogram. The second is the SI base unit of time and is defined by 9,192,631,770 cycles of radiation from a specific transition in cesium-133. Minutes and hours can be derived from the second. Four more fundamental units are also part of SI: ampere, Kelvin, mole, and candela.

SI Units and Metric Prefixes

an introduction to mechanics

Mechanics in Physics and Engineering

Mechanics is a key branch of physics that explains how objects stay at rest or move when forces act on them. It also has major uses in engineering and science. The topic helps students understand everyday motion, machine behavior, and the way many systems work. The recorded history of mechanics begins with Aristotle, who lived from 384 to 322 BC. He linked mechanics with physical theory and looked for a broad universal explanation. Later, Newton defined mechanics as the study of objects at...

basic concept

Fundamental Quantities in Engineering Mechanics

Engineering mechanics begins with four basic quantities: length, time, mass, and force. These ideas help describe how objects move and how they respond to loads. They also support many other engineering fields. Length measures the distance traveled by an object. Engineers describe this distance with coordinates relative to a reference point. Length is also useful for showing the geometry of physical systems. Time measures the succession of an event. A bus traveling from city X to city Y is a...

newton's law of motion

Newton's Laws and Everyday Motion

Newton's laws explain everyday motion and the forces that change it. These three laws describe why objects move, stay still, or speed up. They also show how force and mass affect motion. Newton's first law is the law of inertia. It says an object at rest stays at rest, and an object in motion keeps moving at a constant speed and direction unless an external force acts on it. A sliding box that slows down on its own is a good example. In that case, friction is the net external force that works...

newton's law of gravitational attraction

Gravity Between Masses and Distance

Newton’s law of gravitational attraction describes how gravity acts between two objects. Sir Isaac Newton built this law from empirical evidence and inductive reasoning. He published it in Philosophiae Naturalis Principia Mathematica, or the Principia, on July 5, 1687. The law says that the gravitational force between any two objects depends on their masses and their distance apart. The force is proportional to mass and inversely proportional to the square of the distance between the objects.

units of measurement

SI and Customary Measurement Systems

Mechanical engineering depends on units of measurement for precise and accurate calculations. These units give engineers a standard way to express and compare physical quantities. They are essential when designing and analyzing machines and mechanical systems. Many historical measurement systems have been used over time. Examples include the Babylonian system, the Roman system, the Egyptian system, the Olympian system, the British system, and the Indus Valley system. Today, the International...

international system of units

SI units and metric prefixes provide a standard way to measure size, mass, and time. The International System of Units, or SI system, is used worldwide because it gives scientists a common language for measurement. Its values do not change with location, which helps keep results consistent. The SI system is built on three base units: meter, kilogram, and second. These are the core units for length, mass, and time. The kilogram is the only base unit that already includes a prefix. Prefixes...

numerical calculations

Engineering Notation and Significant Figures

Numerical calculations in engineering depend on clear values, correct units, and careful rounding. Presenting the answer is an important part of engineering practice, so numerically accurate results are preferred. Handheld calculators and computers are often used because they help produce accurate answers. Problems can be solved in several ways. Solving algebraic symbols by hand is common, and the graphical method is often preferred in some cases. Computers are especially useful when many...

accuracy, limits, and approximation

Accuracy and Approximation in Calculations

Accuracy and approximation are important in calculations, especially in engineering. Accuracy means how close a measured value is to the true or actual value. Repeated measurements are often used in engineering mechanics to help make results more precise and accurate. The accuracy of a solution depends on empirical data and the results from different calculations or measurements. A cylindrical container filled with liquid is a simple example. Its volume can be found from the measured...

dimensional analysis

Using Dimensions to Check Physics Equations

Dimensional analysis is a useful way to check physics and engineering equations. It works by writing physical quantities in terms of basic dimensions such as mass, length, and time. Quantities like velocity, acceleration, and force are derived from these basic dimensions. This method helps compare measurements even when the units are different. It also checks whether an equation is dimensionally homogeneous. That means the powers of the fundamental dimensions must match on both sides of the...

problem solving in statics

Statics Problem-Solving Steps for Beams

Statics problem-solving uses a step-by-step method to analyze bodies in equilibrium, especially beams. It is an important part of physics and engineering because the goal is to find practical and accurate answers for real situations. The process usually starts with a physical situation and then turns it into a mathematical model. That model often needs approximations and assumptions. Very small distances can be ignored when they are much smaller than the main dimensions, such as beam width...

key terms and concepts

Learn how SI units use meters, kilograms, seconds, and metric prefixes to measure length, mass, and time with accuracy and consistency.

SI Units and Metric Prefixes | JoVE K12

JoVE Core 機械工学は、平衡、力、トラス解析、構造力学などの重要なトピックをカバーする簡潔でわかりやすいアニメーション ビデオを提供します。実際のアプリケーションを探索し、科学者主導の実験を通じてこれらのコンセプトが実際に動作しているのを目撃してください。

mechanical engineering

Physics

PHYS.1

PHYS.1.E

Chemistry and Physics

IPC.1

IPC.1.E

The Scientific Method

The scientific method is a detailed, empirical problem-solving process used by biologists and other scientists. This iterative approach involves ...

Inductive Reasoning

Inductive reasoning is a form of logical thinking that uses related observations to arrive at a general conclusion. It is uncertain and operates in ...

Deductive Reasoning

Deductive reasoning, or deduction, is the type of logic used in hypothesis-based science. In deductive reasoning, the pattern of thinking moves in the ...

Correlation and Causation

Correlation and CausationStatistical tests can calculate whether there is a relationship, or correlation, between independent and dependent variables. A ...

Ask questions and define problems related to specialized topics of study based on observations or information from text, phenomena, models, or investigations;

112.51.c.1.A.

Scientific Method

The scientific method is used to solve problems and explain phenomena. The development of the scientific method coincided with changes in philosophy ...

Demonstrating the Scientific Method with Tree Branches
ExpandObtain branches containing a few dozen typical leaves from five different local tree species. ...

Observation and Background Research
ExpandNOTE: The first two steps in the scientific process involve studying and observing natural phenomena of ...

Problem-Solving

A problem-solving strategy is a plan of action used to find a solution. It involves trial and error, algorithms, heuristics, and insights. Effective ...

Problem Definition

Problem definition is the initial and the most essential step in research.
The researcher identifies and explains the specific issue or gap to be ...

Apply science practices related to specialized topics of study to plan and conduct investigations or use engineering practices to design solutions to problems;

112.51.c.1.B.

Proper Personal Protective Equipment

Robert M. Rioux &#38; William A Elliott, Pennsylvania State University, University Park, PA
Hazards are many and varied in the laboratory, but the right ...

Emergency Eyewash and Shower Stations

Robert M. Rioux, Pennsylvania State University, University Park, PA
The Occupational Safety and Health Administration (OSHA) mandates that an emergency ...

Electrical Safety

Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Among the many hazards present in the laboratory, electrical ...

Working with Centrifuges

Source: Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Earth's gravitational force is capable of separating ...

Working with Hot and Cold Sources

Source: Robert M. Rioux &amp; Suprita Jharimune, Pennsylvania State University, University Park, PA
Working with extreme temperatures, both high and low, ...

guidelines-in-case-of-a-laboratory-emergency

Guidelines in Case of a Laboratory Emergency

Robert M. Rioux &amp; Zhifeng Chen, Pennsylvania State University, University Park, PA
The most common laboratory emergencies include chemical spills, ...

chemical-storage-categories-hazards-and-compatibilities

Chemical Storage: Categories, Hazards And Compatibilities

Source: Robert M. Rioux &amp; Taslima A. Zaman, Pennsylvania State University, University Park, PA
While the use of various chemicals in experimental ...

Safe Handling of Mineral Acids

Source: Robert M. Rioux &#38; Taslima A. Zaman, Pennsylvania State University, University Park, PA
A mineral acid (or inorganic acid) is defined as a ...

Handling Chemical Spills

Source: Robert M. Rioux &#38; Taslima Zaman, Pennsylvania State University, University Park, PA
Since chemicals are commonly used for laboratory research ...

Proper Use of Autoclaves

Robert M. Rioux &amp; Zhifeng Chen, Pennsylvania State University, University Park, PA
Autoclaving is one of the most commonly used methods in the ...

Fume Hoods and Laminar Flow Cabinets

Robert M. Rioux &amp; William A. Elliott, Pennsylvania State University, University Park, PA
Fume hoods and laminar flow cabinets are engineering controls ...

Decontamination for Laboratory Biosafety

Robert M. Rioux and Zhifeng Chen, Pennsylvania State University, University Park, PA
Decontamination is essential for laboratory biosafety, as the ...

Proper Waste Disposal

Robert M. Rioux and Taslima A. Zaman, Pennsylvania State University, Pennsylvania, PA

Users are responsible for the proper disposal of the waste ...

Use appropriate safety equipment and practices during laboratory, classroom, and field investigations as outlined in Texas Education Agency-approved safety standards;

112.51.c.1.C.

Common Lab Glassware and Uses

Source: Laboratory of Dr. Neal Abrams &#8212; SUNY College of Environmental Science and Forestry
Glassware is a regular appearance in the professional ...

Lab Techniques

Measurement Accuracy
The ability to repeat an experiment and get the same results, or reproducibility, is essential in scientific research. However, ...

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Preparation of LaboratoryExpand
	Here we show the laboratory preparation for 10 students ...

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Determining the Density of an EggExpand
	Density is a measure of how compact a substance or ...

Proper Lab Notebook Keeping

Organic Lab Notebook Keeping
Record keeping is a vital skill in science and organic chemistry labs. Without proper notes, descriptions, quantities, or ...

Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA

	Preparation of the LaboratoryExpand
	Here, we show the laboratory preparation ...

Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA

	Nitration of Methyl BenzoateExpand
	From this lab onward, ...

Use tools appropriate to the specialized topic of study;

112.51.c.1.D.

SI Units: 2019 Redefinition

Measurement is integral to analytical chemistry. Each record comprises a number &#8211; denoting the magnitude&#160; &#8211; and the unit &#8211; a ...

The International System of Units, known as the SI system, is a universally accepted measurement system recognized and used worldwide. The SI system is ...

Measurement: Standard Units

Every measurement provides three kinds of information: the size or magnitude of the measurement (a number), a standard of comparison for the measurement ...

Measurement: Derived Units

The International System of Units or SI system, by international agreement, has fixed measurement units for seven fundamental properties: length, mass, ...

Collect quantitative data using the International System of Units (SI) or qualitative data as evidence as appropriate to the specialized topic of study;

Review and Preview

Data are individual items of information obtained from a population or sample. Data may be classified as qualitative (categorical), quantitative ...

What is a Frequency Distribution

A frequency is the number of times a value of the data occurs. The sum of all the frequency values represents the total number of students included in the ...

Cumulative Frequency Distribution

A cumulative frequency distribution is another type of frequency distribution. Instead of reporting how many data values fall in some classes, it reports ...

Ogive Graph

An ogive graph is sometimes called a cumulative frequency polygon. It is one type of frequency polygon that shows cumulative frequency. In other words, ...

Histogram

The histogram is a graphical representation in the x-y form of data distribution in a data set. The horizontal x-axis is labeled with what the data ...

Relative Frequency Histogram

The relative frequency depicts the proportion of data points that have each value. The frequency tells the number of data points that have each value. ...

Scatter Plot

The most common and easiest way to display the relationship between two variables, x and y, is a scatter plot. A scatter plot shows the direction of a ...

Time-Series Graph

A time-series graph is a line graph with repeated measurements taken at successive intervals of time. It is also called a time series chart. To construct ...

Bar Graph

A bar graph is also called a bar chart and consists of bars that are separated from each other. It either uses horizontal or vertical bars to show ...

Multiple Bar Graph

As the name suggests, a multiple bar graph is the same as a bar graph but has multiple bars to depict relationships between different data values. One can ...

Pareto Chart

A Pareto chart is a bar graph or a combination of both line and bar graphs. The bar lengths represent the individual values or the frequency, while the ...

Pie Chart

A pie chart (or a pie graph) is a circular graphical chart or a pictorial representation of categorical data. It is divided into slices of pie each ...

Organize quantitative or qualitative data using representations appropriate to the specialized topic of study such as scatter plots, line graphs, bar graphs, charts, data tables, diagrams, scientific drawings, and student-prepared models;

112.51.c.1.F.

Modeling and Similitude

A scaled model of a dam is tested in a controlled environment to observe how it will manage water flow, turbulence, and pressure.
This setup predicts the ...

Typical Model Studies

Typical model studies analyze scaled-down systems to predict fluid behavior, focusing on interactions with free surfaces and flow around immersed bodies.
...

design-example-creating-a-hydraulic-model-of-a-dam-spillway

Design Example: Creating a Hydraulic Model of a Dam Spillway

A hydraulic model of a dam spillway is often created by scaling down the design, typically to a 1:15 ratio, to replicate key flow characteristics such as ...

Models, Theories, and Laws

Scientists frequently use models to help them comprehend a specific collection of phenomena. In physics, a model is a condensed version of a physical ...

/files/media/science-education/science-education-thumbs/14686.jpg

Concepts and Prototypes

The human nervous system translates sensory stimuli into neural impulses, which the brain processes into information as thoughts and memories, forming ...

Molecular Models

Physical models representing molecular architectures of chemical compounds play essential roles in understanding chemistry. The use of molecular models ...

Develop and use models to represent phenomena, systems, processes, or solutions to problems as appropriate to the specialized topic of study; and

112.51.c.1.G.

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

Distinguish among scientific hypotheses, theories, and laws as appropriate to the specialized topic of study.

112.51.c.1.H.

Identify advantages and limitations of models such as their size, scale, properties, and materials as appropriate to the specialized topic of study;

112.51.c.2.A.

Introduction to Statistics

The science of statistics involves collecting, analyzing, interpreting, and presenting data. The method of collecting, organizing, and summarizing data is ...

Statistical Analysis: Overview

An analysis is usually conducted by replicated sampling or repeated measurements on the same sample. This leads to scattered results rather than a single ...

systematic-error-methodological-and-sampling-errors

Systematic Error: Methodological and Sampling Errors

Systematic errors, depending on their source, are of four types &#8211; sampling, instrumental, method, and personal errors.
Sampling errors occur due to ...

Random Error

Indeterminate or random errors arise from several uncontrollable variables in successive measurements.
Since these errors can neither be predicted nor ...

types-of-errors-detection-and-minimization

Types of Errors: Detection and Minimization

Error is the deflection of an obtained result from the expected or true results of an experiment. This happens due to the uncertainty associated with the ...

Realism in Experimentation

Source: Laboratories of Gary Lewandowski, Dave Strohmetz, and Natalie Ciarocco&#8212;Monmouth University

In an ideal world researchers would conduct ...

Bias

Bias refers to any tendency that prevents a question from being considered unprejudiced. In research, bias occurs when one outcome or answer is selected ...

Ethics in Research

Today, scientists agree that good research is ethical in nature and is guided by a basic respect for human dignity and safety. However, this has not ...

Analyze data appropriate to the specialized topic of study by identifying significant statistical features, patterns, sources of error, and limitations;

112.51.c.2.B.

Scientific and engineering practices. The student, for at least 40% of instructional time, asks questions, identifies problems, and plans and safely conducts classroom, laboratory, and field investigations to explain phenomena or design solutions using appropriate tools and models. The student is expected to:

SI Units and Metric Prefixes

Description

Transcript

Tags

More videos by Standards