Name: friction moment in journal bearings
Uploaded: 2023-09-22T11:49:30.000Z
Duration: 1 min 23 s
Channel: JoVE

ジャーナルベアリングは、回転するシャフトと車軸に横方向の安定性を提供するために使用されます。
乾燥または部分的に潤滑されたジャーナルベアリングを備えたロープウインチを考えてみましょう。
スプールが時計回りに回転すると、シャフトはベアリングの内面を巻き上げ、ベアリングが滑って安定した回転を経ます。
シャフトのフリーボディ図が描画されます。システムに作用する力には、シャフトの重量、時計回りのカップル、ベアリングの反力が含まれます。
非共線上の反力は、ウェイトと等しく、ウェイトと反対であり、サーフェス法線に対して角度で作用します。この角度は動摩擦角と呼ばれます。
反力の作用線は、常に摩擦円に接しています。
点Oの周りのモーメント平衡状態は、シャフトモーメントをもたらします。
動摩擦角が小さい場合、正弦項は動摩擦角の接線に近似できます。
動摩擦角の接線が動摩擦係数に等しいため、軸受の摩擦抵抗を克服するために必要なモーメントが得られます。

<ol>
	<li>ヒベラー、RC(2016)。エンジニアリングメカニクス \u2012 静力学と力学。 ニュージャージー州ホーボーケン:ピアソンプレンティスホール。450ページ。</li>
	<li>メリアム、J.L.;Kraige、LGおよびBolton、JN(2020)。エンジニアリングメカニクス \u2012 静力学。ニュージャージー州ホーボーケン:ジョン・ワイリー。364ページ。</li>
	<li>ビール、FP;ジョンストン、ER;マズレック、D.F;クロムウェル、PJおよびセルフ、BP(2019)。エンジニアのためのベクトル力学 \u2012 静力学と動力学。ニューヨーク:マグロウヒル。459-460ページ。</li>
</ol>

ジャーナルベアリング

Journal Bearings

ジャーナルベアリングは、回転するシャフトや軸を支持し、横方向の安定性を提供する機械要素です。エンジン、タービン、ポンプなどの機械において、摩擦、摩耗、振動を軽減することが重要です。ジャーナルベアリングの原理は、ベアリング表面と回転するシャフトの間に薄い潤滑膜を形成することで、直接接触を最小限にし、摩擦力を減少させることです。

<img alt="Figure 1" src="/files/ftp_upload/14326/14326_Figure_1v2.svg" style="text-align: center; height: 300px;" />

ジャーナルベアリングの概念をより良く理解するために、乾燥または一部潤滑されたジャーナルベアリングが回転するシャフトを支持するロープウインチを考えてみましょう。スプールが時計回りに回転すると、シャフトはベアリングの内部表面を巻き上げますが、滑って安定した回転が行われます。

シャフトの自由物体図を描いて、システムに作用する力を分析することができます。これらの力には、シャフトの重力（垂直下向き）、時計回りのカップル（シャフトに加えられたトルクを表す）およびベアリングがシャフトに対して発揮する反作用力が含まれます。非共線の反作用力は、シャフトの重力と等しく反対であり、表面法線に対して角度を持ちます。この角度は運動摩擦角と呼ばれます。反作用力の作用線は常に摩擦円に対して接線であり、シャフトとベアリング間の接点の可能なすべての点の軌跡を表します。シャフトの中心点Oを中心としたモーメントの釣り合い条件を適用することで、安定した回転を維持するために必要なシャフトモーメントを求めることができます。

<img alt="Equation 1" src="/files/ftp_upload/14326/14326_Equation_1v2.svg" style="text-align: center; height: 13px;" />

方程式の中の正弦項は、小さい運動摩擦角の場合には運動摩擦角の接線として近似できます。

<img alt="Equation 2" src="/files/ftp_upload/14326/14326_Equation_2v2.svg" style="text-align: center; height: 13px;" />

運動摩擦角の接線は、運動摩擦係数に等しいので、ベアリングの摩擦抵抗を克服するために必要なモーメントを計算することができます。このモーメントは、システムの効率と性能を決定する重要な要素です。

<img alt="Equation 3" src="/files/ftp_upload/14326/14326_Equation_3v2.svg" style="text-align: center; height: 13px;" />

ジャーナルベアリングは、回転するシャフトとアクスルを支え、横方向の安定性を提供する機械部品です。それらは摩擦を減らすのに重要です...

Education

JoVE Core

Mechanical Engineering

機械工学

Unit 1

ユニット1

Friction

摩擦

KEY TERMS AND CONCEPTS

主要用語と概念

friction moment in journal bearings

Journal bearings support rotating shafts and axles while helping keep them stable. They are used in machines such as engines, turbines, and pumps. Their job is to reduce friction, wear, and vibration.

A journal bearing works by keeping a thin film of lubricant between the bearing surface and the rotating shaft. This film limits direct contact and lowers frictional force. The video uses a rope winch with dry or only partly lubricated journal bearings to show the idea.

As the spool turns clockwise, the shaft first rolls up the inner surface of the bearing. It then slips and settles into stable rotation. A free-body diagram of the shaft helps show the forces in the system.

The diagram includes the weight of the shaft, a clockwise couple that represents the applied torque, and the reaction force from the bearing. The reaction force is not collinear with the weight of the shaft. It acts at an angle to the surface normal, and that angle is called the angle of kinetic friction.

The line of action of the reaction force is tangent to the circle of friction. The circle of friction is the set of possible contact points between the shaft and the bearing. By using moment equilibrium about point O, the center of the shaft, the needed shaft moment can be found.

For a small kinetic friction angle, the sine term in the equation can be approximated by the tangent of that angle. Since the tangent of the kinetic friction angle equals the coefficient of kinetic friction, the required moment can be calculated from it. This moment helps describe the bearing’s frictional resistance and its effect on efficiency and performance.

Friction Moment in Journal Bearings

dry friction

Dry Friction in Crates and Everyday Motion

Dry friction appears when two solid surfaces touch and try to move past each other. Students can see it when they walk, slide a box across a table, or rub their hands together. Even though it is common, the forces behind it are not easy to see. A simple crate on a rough horizontal floor helps explain the idea. When an external force pushes the crate sideways, two main forces act on it. The normal force acts perpendicular to the surface and helps balance the crate’s weight, while the frictional...

static friction

Static Friction at the Point of Slip

Static friction is the force that keeps two surfaces from starting to slide past each other. It acts when there is a tendency for motion, but not yet actual slipping. This force helps explain everyday actions like walking on the ground and driving a car. A towing example shows how static friction changes as force is applied. A truck pulls a car with a rope, and the car stays still at first. The car is in static equilibrium, which means the forces on it are balanced. Gravity and the normal...

kinetic friction

Sliding Friction Between Moving Surfaces

Kinetic friction is the sliding friction that acts when two surfaces move against each other. It opposes relative motion and acts parallel to the contact surface, in the opposite direction of travel. In the truck and car example, the car first stays still because static friction holds it in place. When the truck’s force becomes greater than the limiting static frictional force, the friction at the contact surface drops to a lower value. The car then begins to slide, and its speed increases. At...

characteristics of dry friction

Static and Kinetic Dry Friction

Dry friction is the resistance between two solid surfaces that move against each other without lubrication or any fluid. A common example is a gardener pushing a wheelbarrow across the ground. The wheel and the ground create dry friction that slows the motion. Before the wheelbarrow starts to move, static friction acts at the contact surface. Static friction is the force that opposes motion before slipping begins, and it helps keep the wheelbarrow stable. It is present only when there is no...

types of friction problems

Dry Friction in Crate, Ladder, and Frame Problems

Dry friction problems often focus on crates, ladders, and frames that are close to slipping. Dry friction is the force that resists relative motion, or the tendency for motion, between two surfaces in contact. In many physics and engineering problems, this force helps keep an object still or defines the point where motion is about to begin. One common case has no clear impending motion. A force may be applied to a crate, but the crate stays at rest. The friction force between the floor and the...

friction: problem solving

Friction on a Banked Road

Friction on a banked road affects whether a bus stays steady while it moves at constant speed. In this problem, a bus with a mass of three megagrams travels on a sloped road. The coefficient of static friction between the tires and the road is 0.5. The goal is to find the maximum bank angle where the bus will not slip or tip. To solve the motion part, the forces on the bus must be shown first. These include gravity, the normal force, and friction. The normal force is the push from the road,...

wedges

Wedges and Self-Locking Stability

A wedge is a simple machine that can lift, support, and split heavy objects. It can also change the height of structural or mechanical parts. Because it amplifies force, a wedge makes it easier to move or hold large loads with less effort. One example is lifting a heavy slab. In that case, the wedge turns the applied force into a much larger force that acts almost perpendicular to the original push. That force change helps raise the load without requiring a large input force. To analyze wedge...

frictional forces on screws

Square-Thread Screw Mechanics and Friction

Square-threaded screws use a helical thread to turn force into lifting motion. They are common fasteners, but they are also useful for transmitting power and motion in machines. A jack with a square-threaded screw lifts heavy loads when force is applied at the handle and the screw turns. A screw can be viewed as a cylindrical shaft with an inclined square ridge wrapped around it. The distance between two neighboring threads is called the pitch. The lead is the distance the screw advances in...

upward impending motion

Screw Jack Force and Friction Analysis

A square-threaded screw jack lifts heavy loads by turning handle force into a twisting moment. Its upward motion depends on overcoming static friction between the screw threads and the jack. To study this motion, the thread can be treated as if it were a block on the groove of the jack after the thread is completely unraveled. A free-body diagram helps show the forces acting on this simplified system. The force at the handle creates a horizontal force that pushes the movable thread up the...

self-locking screw

Screw Jack Self-Locking Behavior

A square-threaded screw jack can hold a heavy load because of its self-locking behavior. This feature makes the device more reliable when it is used to lift large weights or apply a strong force. If the screw keeps its position after the turning moment is removed, the jack is self-locking. Self-locking happens because friction changes the way the forces act on the thread. The friction force reverses direction, and the reaction force moves to the other side of the thread’s normal. In this case,...

screw: problem solving

Screw Torque and Self-Locking

Screw torque and self-locking are analyzed by looking at a threaded screw shaft and a plate gear. The shaft has a mean radius and a lead. The plate gear also has a mean radius. The coefficient of static friction between the screw and the gear is part of the setup. The first step is to find the static friction angle, φ. This angle is defined by the coefficient of static friction. Next, the lead angle is calculated from the lead and the mean radius of the shaft. It gives the screw geometry...

frictional forces on flat belts

Flat Belt Tension and Friction

Flat belt tension and friction control how power moves from one pulley to another. Flat belts are used in many industrial systems to transmit power between pulleys. As the belt wraps around the pulleys, the tension changes because of friction between the belt and the pulley surface. When a pulley turns counterclockwise, the belt side moving away from the pulley has the higher tension, called T2. The side moving toward the pulley has the lower tension, called T1. To estimate these tensions, the...

flat belts: problem solving

Flat Belt Forces and Pulley Moment

Flat belts transmit power from one pulley to another, and the forces on the belt help determine the moment on a pulley. In this example, a belt wraps around pulleys A and B, with radii of 30 cm and 10 cm. The belt meets the pulleys at a 20 degree angle from the horizontal, which sets up the force balance in the system. As pulley B rotates clockwise, it drives pulley A. That motion creates tension T2 on one side of the belt and tension T1 on the other side. The belt-to-surface contact angle, β,...

pivot bearings

Axial Load Support in Pivot Bearings

Pivot bearings support axial loads on a rotating shaft. A bearing helps two parts move relative to each other while reducing friction and wear. In this design, the pivot is placed at the end of the shaft to carry the axial thrust. The pivot surface can be flat, conical, or truncated, depending on the application. In a flat pivot bearing, the axial load is spread over the bearing area. The pressure is uniform and can be found by dividing the load by the area. To study the forces more closely,...

collar bearings

Friction Torque in Collar Bearings

Collar bearings support axial loads on rotating shafts, and their friction helps determine the torque needed to start motion. They are used in many machines and may have a single collar or multiple collars, depending on the application and load needs. For a single collar bearing under an axial load, the contact area is the ring-shaped region between the external radius and the internal radius of the collar. If the bearing is assumed to support the load evenly, the uniform normal pressure is...

journal bearings

Journal bearings support rotating shafts and axles while helping keep them stable. They are used in machines such as engines, turbines, and pumps. Their job is to reduce friction, wear, and vibration. A journal bearing works by keeping a thin film of lubricant between the bearing surface and the rotating shaft. This film limits direct contact and lowers frictional force. The video uses a rope winch with dry or only partly lubricated journal bearings to show the idea. As the spool turns...

bearings: problem solving

Double-Collar Bearing Torque Calculations

Double-collar bearing torque calculations show how friction and axial force affect bearing performance. Engineers use these calculations to test whether the bearing can handle the forces and moments it experiences during operation. This helps them choose and design bearings for specific applications and setups. For a double-collar bearing with set dimensions and an axial force applied, the maximum frictional moment can be found with a standard expression. The equation is rearranged, and the...

rolling resistance

Tire Deformation and Rolling Resistance

Tire deformation and rolling resistance explain why a rolling wheel still needs a driving force. When a solid cylinder or tire rolls on a rigid surface, the normal force is perpendicular to the surface at the contact point. But real materials are not perfectly rigid, so the surface pushes back with a spread of normal pressures instead of one single force. A hard cylinder on a softer surface compresses the material under it. As the cylinder moves forward, the material in front of the contact...

rolling resistance: problem solving

Lawn Roller Force Calculation

Rolling resistance is the force that makes a rolling object harder to move across a surface. It is also called rolling friction. It comes from deformation in the object and the surface that touch each other. Internal friction, hysteresis, and other energy losses in the materials also play a role. Because of this force, extra energy is needed to keep a wheel, tire, or ball moving. The video applies this idea to a lawn roller. The roller has a mass of 100 kg, a radius of 25 cm, and a coefficient...

key terms and concepts

Learn how journal bearings support rotating shafts, reduce friction, and create the reaction force and moment used to analyze stable rotation.

Friction Moment in Journal Bearings | JoVE K12

JoVE Core 機械工学は、平衡、力、トラス解析、構造力学などの重要なトピックをカバーする簡潔でわかりやすいアニメーション ビデオを提供します。実際のアプリケーションを探索し、科学者主導の実験を通じてこれらのコンセプトが実際に動作しているのを目撃してください。

mechanical engineering

Friction Moment in Journal Bearings

Description

Transcript