Name: sampling materials in solid, liquid, gas
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 1 min 18 s
Channel: JoVE

サンプリング材料には、固体、液体、気体の3種類があります。固体サンプルには、水域、岩石、金属、および生体組織に蓄積された堆積物が含まれる場合があります。
水域の堆積物は、グラブサンプラーまたはピストンコアラーを使用して抽出されます。例えば、グラブサンプラーを川床に降ろした後、サンプラーは堆積物の周りを閉じてサンプルを抽出します。 
液体サンプルの例としては、水、血液、尿、溶媒などがあります。均質な液体の正確な量をピペットまたはシリンジを使用して収集します。
サンプルは、産業排水のような不均一な液体から、定期的に収集される自動サンプラーを使用して取得できます。
ガス状サンプルは、大気、排気口、工業用煙突から採取して分析することができます。
活性炭などの固体吸着剤は、ガス流から標的化合物を選択的に吸着するために広く使用されています。次に、ターゲット化合物を脱離技術で抽出し、適切な分析法で分析します。

サンプリング方法: サンプルの種類

サンプル材料は、固体、液体、ガスの 3 つの主な種類に分類されます。

固体サンプルには、水域の堆積物、土壌、金属、生物組織など、さまざまな物質が含まれます。水域から堆積物を抽出するための 2 つの標準的な方法は、グラブサンプリングとピストンコアリングです。グラブサンプリングでは、装置を使用して、最小限の撹乱で水域の底から個別の堆積物サンプルを収集します。グラブサンプルは、空間的変動 (場所によって異なる) のため、必ずしもエリア全体を表すわけではありません。ピストンコアリングは、堆積物の連続した柱を回収するために使用される方法で、堆積層内の経時的な変化を分析できます。

湖や川などの表層水域では、清潔なサンプリングボトルを使用してサンプルを収集できます。ボトルは、汚染を最小限に抑えるために、必要な深さに沈める必要があります。血液のサンプリングでは通常、静脈に挿入した注射器を使用して特定の血液量を採取します。その後、サンプルは適切な容器に移され、さらに分析されます。尿のサンプリングでは、清潔な容器を使用して特定の量の尿を採取します。尿サンプルは、分析のために適切な容器に移されます。産業排水は、多くの場合、さまざまな化学物質や汚染物質を含む不均質な液体です。このような排水のサンプリングには通常、自動サンプラーが必要です。これは、一定の間隔でサンプルを収集するように設計された装置です。この装置は、所定の時間間隔で代表的なサンプルを収集するようにプログラムされており、排水の組成を包括的に分析します。

ガスのサンプリングでは、活性炭などの固体吸着剤が一般的に使用され、ガス流から対象化合物を選択的に吸着します。活性炭に吸着された化合物は、加熱や溶媒抽出などのさまざまな脱着方法で抽出できます。特定の化合物と必要な情報に応じて、抽出された化合物は、分光法やクロマトグラフィーなどの特性評価技術を使用して分析できます。

サンプリング材料は、固体、液体、気体の3つの主要なタイプに分類されます。
固体サンプルには、堆積物などのさまざまな物質が含まれています...

Education

JoVE Core

Analytical Chemistry

分析化学

Unit 1

ユニット1

Method Development and Sampling Techniques

分析法の開発およびサンプリング技術

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

主要用語と概念

Sampling Methods: Sample Types

sampling materials in solid, liquid, gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues.

Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a continuous column of sediment. This lets scientists study changes over time in the sediment layers.

Liquid samples are often collected with clean tools to reduce contamination. A sampling bottle can be used for surface water in lakes or rivers. The bottle is submerged to the desired depth before the sample is taken. Blood is usually sampled with a syringe placed into a vein to draw a set volume, then the blood is moved into the correct container for analysis. Urine sampling uses a clean container to collect a measured amount of urine before transfer to suitable containers.

Industrial effluents are often mixed liquids that contain many chemicals and pollutants. They are commonly sampled with an automatic sampler. This device collects samples at set time intervals so the sample better reflects the effluent composition. Gas sampling often uses solid sorbents such as activated carbon. The target compounds are adsorbed onto the carbon, then removed by desorption methods such as heating or solvent extraction. The extracted compounds can then be studied with techniques like spectroscopy or chromatography.

Sampling Materials in Solid, Liquid, Gas

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Explore how solid, liquid, and gas samples are collected, from sediment cores and water bottles to blood, urine, effluents, and activated carbon gas sampling.

Sampling Materials in Solid, Liquid, Gas | JoVE K12

JoVE Core 分析化学 は、複雑な化学原理をアニメーションで視覚化することで、SI 単位から NMR 分光法を含むトピックをよりわかりやすくします。実験を撮影した実写動画では、これらの概念が世界中の研究所でどのように応用されているかを取り上げています。

analytical chemistry

Sampling Materials in Solid, Liquid, Gas

Description

Transcript

Tags