Name: modeling event risk over time
Uploaded: 2025-01-09T15:14:17.000Z
Duration: 1 min 11 s
Channel: JoVE

臨床試験では、被験者または参加者は、死亡など1回だけ発生するイベントについて、時間間隔で観察されます。
ここで、参加者が時間 t0 まで生存した場合、時間間隔 t0 から t1 までの死亡確率は λ (t1 - t0) として表すことができます。
この数量は、単位時間あたりの死亡者数としてカウントされるハザード率です。
研究に n 人の個人がいると考えてください。i番目の個人の観察は Bi から始まり、彼らが死亡した場合、死亡時刻は Di です。Ci を参加者が生きている時間とします。
したがって、各個人が死亡の危険にさらされている時間は次のように表されます。
次に、ハザード率は次の式を使用して計算されます。
方程式の量L(観測された死亡者数)は、ポアソン分布に近似しています。
ハザード率が高いほど、時間とともに発生する死亡者数が多くなり、ハザード率が低いほど、時間の経過とともに発生する死亡者数が少なくなります。

ハザード率

Hazard Rate

ハザード率は、ハザード関数又は故障率とも呼ばれ、イベントがまだ発生していない場合に、イベントが発生する瞬間的な割合を表す統計的尺度です。確率論の観点からは、対象がその期間の開始時まで生存することを条件として、非常に短い期間内にイベントを経験する可能性を表します。頻度の観点からは、ハザード率は、イベント数とリスクにさらされている合計時間の比率として見ることができるため、時間の経過とともにイベントが発生する頻度の正規化された尺度となります。

ハザード率は、イベントのリスクが時間の経過とともにどのように変化するかを表す関数です。これは通常、生存分析及び信頼性エンジニアリングで、イベントまでの時間をモデル化するために使用されます。ハザード率は時間とともに変化する可能性があり、調査対象のプロセスの性質に応じて、増加、減少、又は一定になる場合があります。ハザード率の時間の積分を使用して、累積ハザード関数を導き出すことができます。これは、特定の期間に蓄積されたリスクの尺度となります。

臨床研究の分野では、ハザード率は生存時間と失敗時間の動態を理解する上で非常に重要です。ハザード率は、研究者が死亡、病気の再発、回復などのイベントに関心がある場合の、イベント発生までの時間データの分析に特に役立ちます。臨床試験では、治療の有効性を比較したり、リスク要因が生存に与える影響を評価するために、ハザード率がよく使用されます。このコンテキストでの統計分析には、通常、生存関数の Kaplan-Meier 推定量や共変量の影響を評価する Cox 比例ハザード モデルなどの手法を使用して、観測データからハザード率を推定することが含まれます。これらの手法により、研究者は、一部の対象が研究期間の終了までにイベントを経験しない可能性がある打ち切りを考慮し、根本的なリスク構造につ​​いて推論を行うことができます。ハザード率を分析することで、臨床研究者はイベントのタイミングと可能性に関する洞察を得て、治療戦略や医療政策に情報を提供できます。

臨床試験では、被験者または参加者は、死亡など1回だけ発生するイベントについて、時間間隔で観察されます。
さて、もし...

Education

JoVE Core

Statistics

統計

Unit 1

ユニット1

Survival Analysis

生存解析

KEY TERMS AND CONCEPTS

主要用語と概念

modeling event risk over time

Hazard rate is a statistical measure that describes how event risk changes over time. It is also called the hazard function or failure rate. In survival analysis, it shows the instantaneous rate at which an event occurs, but only after the subject has not had the event yet.

From a probability view, hazard rate gives the chance that a subject will have the event in a very small time interval. That chance is conditional on surviving to the start of that interval. From a frequency view, it can also be treated as the number of events divided by the total time at risk. This makes it a normalized way to measure how often events happen over time.

The hazard rate is a function, so it can change as time passes. In some cases, it increases. In other cases, it decreases or stays constant. Researchers use this pattern to study time-to-event data in survival analysis and reliability engineering.

The cumulative hazard function is found by integrating the hazard rate over time. It shows the total risk that builds up over a period. In clinical studies, hazard rate is important for understanding survival and failure times. Researchers use it to study events such as death, disease recurrence, or recovery.

Clinical trials often compare hazard rates to judge how well treatments work or to see how risk factors affect survival. Estimating hazard rates from data often involves the Kaplan-Meier estimator for survival functions or Cox proportional hazards models for covariates. These methods also handle censoring, which happens when some subjects do not have the event before the study ends. By studying hazard rates, researchers can better understand when events happen and how likely they are to occur.

Modeling Event Risk Over Time

introduction to survival analysis

Time-to-Event Data and Censoring

Survival analysis is a statistical method for time-to-event data. The event can be death, disease relapse, system failure, or recovery. It helps estimate survival time, which is the time until a specific event occurs, and it also shows what factors may affect that time. A key idea in survival analysis is censoring. Censoring happens when the event of interest has not been observed for some people during the study period. Because the data are incomplete in those cases, survival analysis uses...

life tables

Life Tables and Survival Patterns

A life table is a statistical tool that shows mortality and survival patterns in a population. It organizes data across age intervals so students can see how likely a group is to survive or die at each stage of life. The table gives a clear snapshot of population dynamics over time. Life tables are used in demography, public health, actuarial science, and ecology. They help scientists study life expectancy, plan health interventions, estimate insurance risk, and compare how species survive in...

survival curves

Kaplan-Meier Survival Curve Basics

Kaplan-Meier survival curves show how the chance of staying event-free changes over time. They are used to track survival in a population and to compare groups in medicine, public health, and reliability engineering. The Kaplan-Meier estimator is the most common way to build these curves. It is a non-parametric method, which means it does not assume a fixed pattern for the data. The result is a stepwise line that drops each time an event happens, such as death, disease recurrence, or...

actuarial approach

Life Table Method for Survival Rates

The life table method, also called the actuarial approach, is used to estimate survival rates in clinical and population studies. It began in life insurance, where risk over time must be measured carefully. In health research, it gives a clearer picture of survival when some participants are lost to follow-up or die from causes unrelated to the study. This method works by dividing the study period into set intervals, usually one year. That makes it useful for tracking outcomes over time,...

kaplan-meier approach

Survival Curves with Kaplan-Meier Data

The Kaplan-Meier estimator is a non-parametric method for estimating a survival function from time-to-event data. It is commonly used in medical research to track how many patients survive for a set time after treatment. It is also important in clinical trials, epidemiological studies, and reliability engineering. This method helps researchers study survival probabilities over time, even when some data are incomplete. That incomplete data is called censored data, which means the exact event...

assumptions of survival analysis

Survival Analysis Assumptions in Studies

Survival analysis studies the time until an event happens. The event may be death in a living organism or failure in a mechanical system. These models are used in medicine, biology, engineering, and public health to study time-to-event data. Careful study design matters because the method depends on several key assumptions. One common feature of survival times is positive skewness. This means events often happen early, while fewer cases occur later. Survival data also often include censoring,...

comparing the survival analysis of two or more groups

comparing-the-survival-analysis-of-two-or-more-groups

Kaplan-Meier Curves and Hazard Ratios

Kaplan-Meier curves and hazard ratios help researchers compare survival time between groups. Survival analysis looks at the time until an event happens, such as death, disease recurrence, or recovery. It is a key tool in medical research. A major strength of survival analysis is that it can handle censored data. Censored data means the event has not happened for some participants by the end of the study, or it has not been observed. This makes survival analysis different from standard...

the mantel-cox log-rank test

Log-Rank Test for Comparing Survival Curves

The Mantel-Cox log-rank test compares survival curves from two groups. It checks whether the groups have a statistically significant difference in survival time. This makes it useful when the timing of an event matters, such as death or disease recurrence. The log-rank test is non-parametric. That means it does not assume a specific distribution for the survival data. It is also useful in medical research, where it often helps compare a new treatment with a control or standard treatment in...

applications of life tables

Life Tables in Public Policy and Science

Life tables are used in many fields to study mortality and survival rates. They give a numerical way to examine how long people or living things are likely to survive. This makes them useful for public health, business planning, and scientific research. In demography and public health, life tables help experts study population changes and predict future trends. They can show patterns such as an aging population or the effect of a health policy. In Nigeria, health officials used survival rates...

cancer survival analysis

Cancer Survival Curves and Risk Factors

Cancer survival analysis measures how long it takes from diagnosis or the start of treatment to a specific outcome, such as remission or death. It helps researchers judge treatment effectiveness and understand what affects patient outcomes. These results also support clinical decisions and prognostic evaluations. Survival data are often skewed and not normally distributed. They also include censored cases, where the full survival time is unknown because the study ends, a patient is lost to...

hazard rate

Hazard rate is a statistical measure that describes how event risk changes over time. It is also called the hazard function or failure rate. In survival analysis, it shows the instantaneous rate at which an event occurs, but only after the subject has not had the event yet. From a probability view, hazard rate gives the chance that a subject will have the event in a very small time interval. That chance is conditional on surviving to the start of that interval. From a frequency view, it can...

hazard ratio

Hazard Ratio in Clinical Trials

The hazard ratio is a way to compare event risk in clinical trials. It is often used to study events such as death or disease recurrence in two groups over time. The two groups are usually a treatment group and a control group. A hazard ratio compares hazard rates, which are the instantaneous risk of an event happening at a given moment. It shows how the risk in one group relates to the risk in the other group. In a cancer drug study, for example, the hazard ratio can show how a new treatment...

truncation in survival analysis

Left and Right Truncation in Survival Data

Truncation in survival analysis describes data loss caused by the timing of an event or by when a subject can enter a study. It can happen in two forms: left truncation and right truncation. In both cases, some individuals are left out of the dataset before analysis begins. Left truncation happens when people who had the event before a set time are not included in the study. This often occurs with delayed entry, which means a person is only observed if they survive until the entry point. For...

censoring survival data

Types of Censoring in Survival Analysis

Survival analysis studies time-to-event data, which tracks how long it takes for an outcome to happen. It is used in medicine, engineering, and social science. A common problem in this type of data is censoring, which means the full event time is not observed for every person or item. Censoring can happen for several reasons and in different patterns. The most common kind is right censoring. This happens when the event has not occurred by the end of the study or when a participant is lost to...

survival tree

Survival Tree in Time-to-Event Analysis

A survival tree is a non-parametric tool in survival analysis that links predictor variables, or covariates, to survival time. Survival time is the time until an event of interest occurs. It is useful when some data are censored, which means the event has not happened for some people by the end of the study or the exact event time is unknown. Building a survival tree starts with a dataset that includes covariates, survival time, and a censoring indicator for each subject. The data must be...

parametric survival analysis: weibull and exponential methods

parametric-survival-analysis-weibull-and-exponential-methods

Modeling Survival Time with Weibull and Exponential

Parametric survival analysis models survival time by assuming a specific probability distribution for when an event occurs. The Weibull and exponential distributions are two common choices because they are flexible and relatively straightforward to use. The Weibull distribution is a flexible model in parametric survival analysis. It can describe both increasing and decreasing hazard rates, depending on its shape parameter beta. When beta is greater than 1, the hazard rate rises over time. That...

key terms and concepts

Learn how hazard rate measures the changing risk of an event over time, with uses in survival analysis, clinical studies, and reliability engineering.

Modeling Event Risk Over Time | JoVE K12

statistics

JoVE Core 統計は、データの収集、分析、表示、解釈の概念と応用を学生に紹介します。これらのアニメーション授業は、幅広い分野の学生にとって有益な統計の理解を提供します。さらに、科学者が実際に活動しているビデオでは、世界中の今日の研究所で行われている古典的および独自の研究実験における関連概念の適用を示しています。

Modeling Event Risk Over Time

Description

Transcript