有機化学の基礎技術
At the end of this lab, students should know...
View the full transcript and gain access to JoVE Lab Manual videos
Q1: What personal protective equipment is required for organic chemistry lab work?
Students must wear a lab coat, chemical splash goggles, and gloves to protect against chemical exposure and splashes during organic chemistry experiments. These personal protective equipment items are essential safety requirements before beginning any laboratory procedures involving organic compounds and reactive chemical solutions.
Q2: Why are separate waste containers needed in an organic chemistry lab?
Different waste containers prevent chemical incompatibility and enable proper disposal procedures. Labs require labeled waste containers for non-halogenated organic waste, hydrochloric acid waste, aqueous waste, and glass waste to ensure safe handling, environmental compliance, and regulatory adherence throughout the experiment.
Q3: How should tetrahydrofuran and hydrochloric acid be stored in the laboratory?
Tetrahydrofuran and hydrochloric acid must be stored in labeled glass bottles within a fume hood to prevent vapor exposure and contamination. Place 150 mL of tetrahydrofuran in a 250-mL bottle and 35 mL of 3 M hydrochloric acid in 50-mL bottles, keeping all stock bottles capped and separated from student work areas.
Q4: What glassware and equipment should be set up at each student lab station?
Each pair of students needs lab stands, a stirring hotplate, clamps, a condenser, beakers of various sizes, graduated cylinders, a round-bottom flask, a Büchner funnel, Pasteur pipettes, a stir bar, and a glass stirring rod. Additional items include thermometers, rubber tubing, vacuum tubing, and lab tape for comprehensive experimental setup and data collection.
Q5: What supplies should be placed in central locations around the lab?
Distribute plastic wash bottles filled with deionized water throughout the lab workspace for easy access. Place vacuum grease, circular filter papers, laboratory wipes, and Pasteur pipettes in central locations so all students can conveniently access these supplies during experiments without disrupting individual workstations.
Q6: How should the balance area be prepared for student use?
Position sodium benzoate and a small waste container near the balances for convenient access during measurements. Stock each balance with weighing boats, spatulas, and lab wipes to ensure students have adequate supplies for measuring and handling solid reagents throughout the experiment without delays or shortages.