紫外可視分光法: ランベルト・ベールの法則

The Beer-Lambert law describes the relationship between absorbance, concentration, and path length of light through a sample. It combines Lambert's law, which states that light intensity loss is proportional to original intensity and path length, with Beer's law regarding transmittance. This fundamental principle allows chemists to quantify unknown concentrations using measured absorbance values.

Absorbance is the logarithmic function of the ratio of incident light intensity (I0) to transmitted light intensity (I). The Beer-Lambert equation expresses absorbance as A = εlc, where ε is molar absorptivity, l is path length, and c is concentration. This linear relationship between absorbance and concentration enables quantitative analysis of solutions.

Molar absorptivity (ε) is the absorbance of a 1 molar solution measured in a cell with a 1 cm path length, expressed in units of M⁻¹cm⁻¹. It is a characteristic constant for each compound at a particular wavelength and reflects how strongly that compound absorbs light. Knowing molar absorptivity allows determination of unknown concentrations from measured absorbance values.

Absorptivity values above 10⁴ M⁻¹cm⁻¹ are classified as high-intensity absorptions, while those below 10³ M⁻¹cm⁻¹ are low-intensity absorptions. These classifications indicate the strength of light absorption by a compound. For example, absorption bands in benzoic acid spectra demonstrate characteristic molar absorptivity values at different wavelengths.

If absorbance and molar absorptivity at a particular wavelength are known, the Beer-Lambert law can calculate unknown concentration using the relationship A = εlc. By rearranging to solve for concentration (c = A/εl), analysts can determine sample concentration from measured absorbance. This principle forms the basis for creating calibration curves in quantitative analysis.

The direct proportionality between absorbance and concentration allows chemists to create calibration curves by plotting absorbance against known concentrations. This linear relationship enables accurate determination of unknown concentrations through interpolation. The Beer-Lambert law's predictability makes UV-Vis spectroscopy a reliable quantitative analytical technique.

Path length is the distance light travels through a sample and directly influences absorbance according to the Beer-Lambert equation (A = εlc). Longer path lengths increase absorbance for the same concentration and molar absorptivity. Standard cuvettes typically have 1 cm path lengths, which is the reference standard for defining molar absorptivity values.