11.13
鼓膜温度の評価には、鼓膜温度計 (TMT) が使用されます。手順は次のとおりです。
ステップ 1: 微生物の感染を防ぐために、適切な手指衛生を実践することから始めます。
ステップ 2: 正確な測定を確実にするために、温度計の電源をオンにし、準備完了のサインが画面に表示されるまで待ちます。
ステップ…
これは、鼓膜温度計を使用して温度を評価するための明確で簡潔なガイドです。
最初のステップは手指衛生で、微生物の拡散を防ぐのに役立ちます。
次に、充電ユニットから温度計を取り外し、スイッチを入れます。
次に、交差感染を避けるためにプローブカバーをスライドさせます。
プローブのレンズカバーを塞ぐ可能性があるため、頭を横に傾けて外耳道に耳垢の蓄積があるかどうかを観察するように患者に指示します。.
大人の場合は、耳介を上に引っ張って戻して、耳道をまっすぐにします。この方法では、鼓膜を最大限に露出させることができます。
周囲温度が測定値に影響を与えないように、プローブを外部外耳道に慎重に挿入して、完全な密閉を実現します。
次に、スキャンボタンを押して、ビープ音が鳴るまでプローブを所定の位置に保持します。
患者の体温がディスプレイユニットに表示されます。
次に、プローブカバーを取り外して廃棄します
患者を快適な位置に補助し、機器を交換し、手指衛生を行います。
最後に、調査結果を文書化します。
View the full transcript and gain access to JoVE Core videos
Q1: Why is hand hygiene important before assessing tympanic membrane temperature?
Hand hygiene prevents the spread of microorganisms to the patient and reduces cross-infection risk. Performing hand hygiene at the beginning and end of the procedure protects both the patient and healthcare provider, ensuring safe and hygienic temperature assessment throughout the vital signs evaluation.
Q2: How should you position the patient's ear for accurate tympanic membrane temperature measurement?
Instruct the patient to tilt their head to the side for comfort. For adults, gently pull the pinna up and back to straighten the ear canal, then insert the probe angling it toward the patient's jawline. This positioning provides maximum exposure of the tympanic membrane and ensures proper probe placement for accurate readings.
Q3: What should you check before inserting the thermometer probe into the ear canal?
Observe the ear canal for cerumen accumulation, which can obstruct the probe's lens cover and affect measurement accuracy. If cerumen is present, consider switching to the opposite ear. Always ensure the probe cover is in place to prevent cross-contamination before insertion.
Q4: What does the beep sound indicate during tympanic membrane temperature measurement?
The beep sound signals that the temperature measurement is complete. After pressing the scan button and maintaining the probe in position, the audible beep indicates the thermometer has finished reading, and the patient's temperature will appear on the display unit.
Q5: Why is achieving a proper seal important when inserting the thermometer probe?
A proper seal prevents ambient temperature from impacting the readings, ensuring accurate measurement. Carefully insert the probe into the external ear canal to achieve a perfect seal, which allows the thermometer to detect only the patient's tympanic membrane temperature without external environmental interference.
Q6: What steps should you follow after obtaining the temperature reading?
Remove the probe cover and discard it properly to prevent cross-contamination. Assist the patient to a comfortable position, replace the equipment in its charging unit, perform hand hygiene again, and document the findings in the patient's record to ensure accurate record-keeping and continuity of care.
Q7: When should you turn on the thermometer before measuring tympanic membrane temperature?
Turn on the thermometer after removing it from the charging unit and before sliding in the probe cover. Wait until the ready sign appears on the screen to ensure accurate measurement. This preparation step guarantees the device is functioning properly before patient assessment begins.