原子間力顕微鏡

AFM uses a nanoprobe attached to a flexible cantilever to scan sample surfaces at nanometer resolution, achieving magnification up to 1,000,000X compared to optical microscopes' 1000X limit. A laser beam tracks cantilever deflection through a position-sensitive photodetector, allowing computer software to generate three-dimensional images with exceptional detail of both fixed and live specimens.

The probe, comprising the cantilever and tip assembly, is the heart of AFM and the most frequently replaced component due to wear from sample interaction. Silicon probes suit hard samples because they are stiffer and sharper, while silicon nitride probes work better for softer samples. Probe material choice directly impacts imaging accuracy and sample compatibility.

In contact mode, the probe tip continuously touches the sample surface, and repulsive forces bend the cantilever as it drags across the surface. In dynamic mode, the probe oscillates just above the surface without touching it, and attractive and repulsive forces alter the cantilever's oscillation amplitude. Both modes use raster scanning to generate three-dimensional surface profiles.

AFM scans specimens using raster scanning—moving the probe back and forth across x- and y-axes while recording vertical cantilever movement along the z-axis. The laser deflection data captured by the photodetector is processed by computer software to construct a complete three-dimensional topographic map showing surface contours and features at nanometer resolution.

Yes, AFM can create images of both fixed and live specimens, allowing it to capture dynamic cellular processes such as actin dynamics in real time. This capability distinguishes AFM from many other imaging techniques that require fixed samples, making it valuable for studying protein dynamics in living cells and observing structural changes as they occur.

AFM can analyze topographic details of diverse specimens including ceramics, glass, polymers, and biological samples. Its versatility stems from the ability to adjust probe material and imaging mode based on sample properties. AFM offers over 1000 times more resolution than optical imaging systems, providing three-dimensional surface profiles rather than flat two-dimensional images.

Sharp AFM probe tips are produced using electrochemical etching or carbon nanotubes to achieve higher accuracy analysis. These manufacturing techniques create tips with precise geometry suited to different sample types. The choice between etching methods and carbon nanotube construction depends on the required sharpness and durability for specific imaging applications.