電流

Electrical current is the rate at which charge flows through a circuit. The SI unit for current is the ampere (A), defined as one coulomb of charge passing through an area per second. A current of one ampere represents 6.25 × 10^18 electrons flowing through the area each second. Most electrical appliances are rated in amperes for proper operation.

Conventional current direction flows from the positive terminal to the negative terminal of a battery. Electron flow, however, moves in the opposite direction—from the negative to positive terminal—because electrons carry negative charge. In metal wires, electrons are the charge carriers, while in ionic solutions like salt water, both positive and negative charges move.

A switch controls whether a complete path exists for current flow in a circuit. When the switch is closed, it creates a continuous path for charges to flow from the battery's positive terminal through the circuit components and back to the negative terminal. When open, the switch breaks the circuit, stopping current flow and turning off devices like lamps or flashlights.

Circuit schematics use standardized symbols to represent components clearly. A battery is shown as long and short lines representing the historic voltaic pile. A lamp appears as a circle with a loop inside, representing the filament. A switch is depicted as two points with a conducting bar connecting them. Solid lines represent wires connecting all components together.

Current determines how much charge moves through a circuit per unit time, affecting appliance performance and safety. Large currents, like those in refrigerators, move substantial charge quickly, while small currents in calculators move minimal charge slowly. Fuses and circuit breakers are rated in amperes to protect circuits from dangerous overcurrent conditions that could damage equipment or cause fires.

In metal wires, current is carried exclusively by electrons, which are negatively charged particles. In ionic solutions such as salt water, both positive and negative ions move to carry current. The theory of metallic conduction explains how electrons move through metal lattices, while ionic conduction involves the movement of charged particles in solution.

A lamp illuminates only when there is a complete circuit path for current to flow from the battery through the switch, lamp, and back to the battery. If the switch is open or any connection is broken, the circuit is incomplete and no current flows, leaving the lamp dark. The closed switch ensures continuous charge flow through the filament, causing it to glow.